Reducing Electromagnetic Radiation Around the Fourth Generation Base Stations
- Authors
-
-
Christopher C. NWAOGU
Author
-
Nnamdi AHUCHAOGU
Author
-
- Keywords:
- Electric field strength, Magnetic Field strength, Power density, electromagnetic radiation, filters.
- Abstract
-
Electromagnetic radiations and interferences, poses health hazards both to man and his environment the importance of reducing it cannot be over emphasized. This work focused on the reduction of electromagnetic interference (EMI) around 4G base station using filter techniques. The projected rise in wireless communication network generations and the inherent electromagnetic emission that come along with the technologies have necessitated the search for better ways of reducing the electromagnetic interference. Considering the current electromagnetic interference concerns, the base station is the hub of the electromagnetic interference. This research examined different ways of deploying the finite impulse response filters (FIR) at the base station level to help reduce the impact of EMI around the 4G base stations. The research adopted the finite impulse response (FIR) filter technique, which is connected at the transceiver point at the base station level. The data used for analysis in the developed model were extracted from the daily collection of data from the service provider operators. Electromagnetic interference (EMI) for the filtered and unfiltered base stations were analyzed using the International Commission on Non-Ionizing Radiation Protection (ICNIRP) model. Data for five 4G base station within the Umuahia metropolis were used. The results obtained for 4G base stations showed that the deployment of Filter reduced the electromagnetic power density around a 4G base station. As without the filters the power densities were 3.755, 2.708, 1.280, 0.681, 0.412, 0.273, 0.193, 0.144, 0.111, 0.088 and 0.072. On the deployment of the FIR filters the power densities were reduced to 3.552, 2.562, 1.211, 0.645, 0.390, 0.258, 0.183, 0.105, 0.083 and 0.068 respectively.
- References
- Downloads
- Published
- 25-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Ahmad ADO, Abdullahi YAHAYA, Abubakar J. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF, Kinetic Study of 4-Nitrophenol Sonocatalytic Degradation , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Enakhe P. OTSUPIUS, Nihad ACHEKUOGENE, Influence of Additive Manufacturing Process on the Fatigue of Polymer Materials: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Muyideen O. MOMOH, Emmanuel I. AWODE, Gowon SULE, Umar ABUBAKAR, Ikechukwu O. ALUM, Usman K. AMINU, Bio-Inspired Flight Mechanisms for Unmanned Aerial Vehicles: An Overview , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Vincent B. ONIGBARA, Sunday I. AGU, Muftau A. GBENLE, Metal-Based Biomaterials for Clinical Implant Applications: Materials and Performance – A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Dandison M. WALI, Beabu B. DUMKHANA, Raymond A. EKEMUBE, Silas O. NKAKINI, Smart Assessment of Tractor Noise Levels During Tillage Operation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Adekunle A. YEKINNI, Adeniyi O. ADESINA, Kazeem A. BELLO, Effect of Subcritical Tempering on the Microstructural, Mechanical and Corrosion Behaviour of Mild Steel , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Joseph O. AJAYI, Adekunle T. ADENIYI, Mufliah G. OMOFOYEWA, Abel A. ADEYI, Abdulwahab GIWA, Evaluation on the Rheological Properties of Water-Based Drilling Mud: A Case Study of Ire-Ekiti Clay , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Benedict O. EDENSETING, Innocent O. OBOH, Alexander A. JOCK, Effective Food Waste Utilization: A Veritable Source of Biofuel for Nigerian Economic Sustenance and Development - A Review , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Ojochide P. DAMIAN, Fadimatu N. DABAI, Abdulwasiu ABDURRAHMAN, Kamiludeen OLANREWAJU, Bilyamin ABDULMUMIN, Grace A. OLUGBENGA, A Simulation-Driven Strategy for Improved Expandable Polystyrene Synthesis via Multi-Stage Initiator Dosing , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Samuel O. OLADIPUPO, Dominic S. NYITAMEN, Lanre S. MOJEREOLA, Design, Simulation and Fabrication of a Slot Loaded 2.45 GHz Microstrip Patch Antenna for ISM Band Wireless Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
