Vol. 2 No. 1 (2026): June 2026

Articles

• The Impact of Industry 4.0 on New Product Development in Small and Medium Enterprises: A Review

  1-20

  Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE (Author)

  • FJET_21_1_1

• Development of Ensemble SVM–LSTM Model for Phishing Website Detection

  21-30

  Abubakar L. IBRAHEEM, John K. ALHASSAN, Noel D. MOSES, Suleiman AHMAD (Author)

  • FJET_21_2_2

• Blockchain-Based Food Supply Chain Traceability: A Systematic Review of Privacy Preserving and Scalability

  31-40

  Munir A. ADEWOYE, Ahmed ALIYU, Usman A. ALI, Abdulrasheed JIMOH (Author)

  • FJET_21_3_3

• A Hybrid Deep Learning Model for Efficient Anomaly Detection in Video Surveillance Systems

  41-50

  Abba M. BALA, Abdurrauf G. SHARIFAI, Umar S. HARUNA (Author)

  • FJET_21_4_4

• Design and Fabrication of Tapered Screw Briquetting Machine

  51-58

  Yahaya U. JAURO, Danladi D. USMAN, Lawan G. ABUBAKAR, Yusuf G. SHIMBURA, Aminu MOHAMMED (Author)

  • FJET_21_5_5

• Development and Performance Evaluation of Biomass Pyrolysis System for Biofuel Production

  59-72

  Ndagi MAMUDU, Ibrahim S. MOHAMMED, Mohammed ALIYU, Peter DANIEL, Timothy Y. AKANDE, Bala A. GARBA (Author)

  • FJET_21_6_6

• Effect of Petroleum Contamination on Soil Properties and the Removal Efficiency of Volatile Organic Compounds Using Air-Stripping System

  73-87

  Stephen YAKUBU, Baba MAKUN (Author)

  • FJET_21_7_7

• Development of a Solar Dryer with Multi-Products and a Residual Moisture Control System

  88-98

  Nafisa A. ABDULHAMID, Danladi D. USMAN, Kabiru I. JAHUN, Rotkangmwa J. SATI, Yahaya U. JAURO, Abdulmajid M. HASHIR, Yusuf G. SHIMBURA (Author)

  • FJET_21_8_8

• Vibration Analysis as a Transformative Approach to Condition-Based Monitoring

  99-107

  Tina I. FRANCIS-AKILAKI, Onimi O. ASHAMA, Raymond A. EKEMUBE (Author)

  • FJET_21_9_9

• Multi-Criteria Decision Analysis and Optimization Approaches in Sustainable Waste-to-Energy Planning: A Systematic Review

  108-123

  Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH (Author)

  • FJET_21_10_10

• Determinants of Blockchain Adoption for Academic Certificate Verification: Insights from Verification Officers for Sustainable Education in Nigerian Higher Education Institutions

  124-135

  Usman A. ALI, Munir A. ADEWOYE, Adamu U. ABDULLAHI (Author)

  • FJET_21_11_11

• Assessment of the Role of Kogi State Government in Flood Mitigation in Lokoja, Kogi State, Nigeria

  136-146

  Peter EDOKA (Author)

  • FJET_21_12_12

• A Hybrid Graph Neural Network Framework Integrating Handcrafted Features for Real-Time Iris Recognition in Motion

  147-155

  Usman A. ABDURRAHMAN, Abdulkadir A. BICHI, Usman HARUNA, Akibu M. ABDULLAHI (Author)

  • FJET_21_13_13

• Design Modification and Performance Evaluation of an Existing Cashew Nut Shell Liquid (CNSL) Extraction Machine

  156-168

  Isaac O. OLAOYE (Author)

  • FJET_21_14_14

• Consumer Perceptions of Artificial Intelligence (AI)-Driven Smart Grids and Energy Efficiency in Northwest Nigeria’s Power Distribution Sector: A Multi-State Case Study of Sokoto, Kebbi, and Zamfara

  169-176

  Victor A. NSABA, Sabiu B. YUSUF, Kafayat A. IBRAHIM (Author)

  • FJET_21_15_15

• A Low-Cost, Offline-Capable Wireless Soil Moisture Monitoring System for Smallholder Farmers: Design, Validation, and Agronomic Impact

  177-185

  Suleiman ZUBAIR, Hassan T. ABDULAZEEZ, Bala A. SALIHU, Gambo MOHAMMED (Author)

  • FJET_21_16_16

• Design and Implementation of a BLE 5.0-Enabled Wearable Finger Mouse Using the XIAO nRF52840 Platform

  186-194

  Suleiman ZUBAIR, Hassan ABDULAZEEZ, Bala A. SALIHU, Abubakar A. SHUAIBU (Author)

  • FJET_21_17_17

• Mechanical and Biological Performance of Titanium Hydroxyapatite Composites for Biomedical Applications

  195-200

  Vincent B. ONIGBARA, Muftau A. GBENLE, Sunday I. AGU (Author)

  • FJET_21_18_18

• Evaluation of UNILORIN Dam Moulding Sand Properties for Foundry Applications

  201-210

  Yusuf L. SHUAIB-BABATA, Kabiru S. AJAO, Yusuf O. BUSARI, Ibrahim O. AMBALI, Kehinde O. ARUNA, Henrietta O. COKER, Toheeb A. NURUDEEN (Author)

  • FJET_21_19_19

• Development and Performance Evaluation of a Semi-Automated Impact Fracture Tester

  211-225

  Oluyemi S. ONIFADE, Olusegun O. AJIDE (Author)

  • FJET_21_20_20

• Solar-Powered Low-Cost Housing: Designing Off-Grid Communities with Interlocking Stabilised Soil Blocks (ISSB)

  226-231

  Obafemi A. IBITOYE, Jemimah O. TOLU-ALALADE (Author)

  • FJET_21_21_21

• Design and Construction of a 1.5 kVA Pure Sine Wave Inverter for Office Use

  232-245

  Michael R. ADU, Blessing O. UMUKORO (Author)

  • FJET_21_22_22

• Design, Construction, and Performance Evaluation of an Efficient Ethanol Stove for Domestic Cooking Application

  246-260

  Tina I. FRANCIS-AKILAKI, Raymond A. EKEMUBE (Author)

  • FJET_21_23_23

• Experimental Characterization and Seasonal Energy Potential Assessment of Municipal Solid Waste in Kano City, Nigeria

  261-272

  Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH (Author)

  • FJET_21_24_24

• Developments and Applications of Additive Manufacturing in the Automotive Industry

  273-284

  Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, Francis O. BOROKINNI, Friday ONUH, Tunde O. OGUNDANA, Adebayo I. OLUMOROTI (Author)

  • FJET_21_25_25

• Open Radio Access Network (ORAN) Deployment Strategies for Remote Areas

  285-294

  Taiwo J. DURODOLA, Suleiman ZUBAIR, James AGAJO (Author)

  • FJET_21_26_26

• Inhibitory Potential of Blended Parkia biglobosa and Delonix regia Extracts on Corrosion of AISI 1007 Steel in 1.0 M Hydrochloric Acid Medium

  295-311

  Yusuf L. SHUAIB-BABATA, Kabiru S. AJAO, Yusuf O. BUSARI, Ibrahim O. AMBALI, Toheeb A. NURUDEEN, John A. OKOLO, Gabriel A. LONGE (Author)

  • FJET_21_27_27

• Design, Simulation and Fabrication of a Slot Loaded 2.45 GHz Microstrip Patch Antenna for ISM Band Wireless Applications

  312-325

  Samuel O. OLADIPUPO, Dominic S. NYITAMEN, Lanre S. MOJEREOLA (Author)

  • FJET_21_28_28

• A Review on Neem Leaves Valorization Through Advanced Briquetting and Carbonization Technologies

  326-335

  Babagoni A. ADAM, Muhammad B. MAINA, Muhammad SHUWA, Abba B. MUHAMMAD (Author)

  • FJET_21_29_29

• Utilisation of Supercritical Critical Fluids in Adsorption Process: A Comprehensive Review

  336-355

  Murtala NAMAKKA, Abdulhamid S. ILIYASU (Author)

  • FJET_21_30_30

• Simulation of Trucks Haulage Operation at Ashaka Cement Company in Gombe State, North-Eastern Nigeria

  356-366

  Luqman K. SALATI, Sani D. MUHAMMAD, Jacob T. ADEYEMO (Author)

  • FJET_21_31_31

• Machine Learning Models for Predicting Flow Rate for Niger Delta Oil Wells

  367-380

  Olusiji A. ADEYANJU, Joseph O. OLAIDE (Author)

  • FJET_21_32_32

• Assessment of Vibration and Noise Impacts of Drilling and Blasting Operations on Urban Structures: A Case Study of Zeberced Quarry, Abuja

  381-388

  Kayode A. IDOWU, Favour O. BENJAMIN, Emmanuel B. SAMANI (Author)

  • FJET_21_33_33

• Metal-Based Biomaterials for Clinical Implant Applications: Materials and Performance – A Review

  389-394

  Vincent B. ONIGBARA, Sunday I. AGU, Muftau A. GBENLE (Author)

  • FJET_21_34_34

• Scalability Versus Accuracy Trade-offs in Distributed Big Data Processing Frameworks: A Comparative Evaluation of Apache Spark, Flink, and Dask Using Benchmark Datasets

  395-401

  Isiaq O. ALABI, Hassan T. ABDULAZEEZ, Sulaiman AHMAD, Yahaya M. SANI (Author)

  • FJET_21_35_35

• Quantum Computing Applications in Software Engineering: A Scoping Review

  402-412

  Hillary T. OGBODO, Bilkisu L. MUHAMMAD-BELLO, Joshua ABAH, Saleh E.-Y. ABDULLAHI (Author)

  • FJET_21_36_36

• Design and Implementation of an IoT-Based Smart Attendance System

  413-424

  Michael R. ADU, Afeez O. OLAWUNMI (Author)

  • FJET_21_37_37

• Evaluation of the Agricultural Best Management Practices (ABMPs) and Their Effect on Discharge Reduction of Shiroro Dam Site using SWAT Model

  425-441

  Ibrahim A. KUTI, Sunday E. OGUNMOLA, Peter A. ADEOYE (Author)

  • FJET_21_38_38

• Design Analysis of a Kenaf Decorticating Machine

  442-452

  Ibrahim BALA, Solomon M. DAUDA, Audu A. BALAMI, Peter A. IDAH (Author)

  • FJET_21_39_39

• Prediction of International Roughness Index of Flexible Pavement Using Machine Learning-Based Predictive Framework in Ekiti State

  453-463

  Oluwayinka. G. AKINWAMIDE, Olugbenga O. AMU, Christopher FAPOHUNDA (Author)

  • FJET_21_40_40

• Advances in Privacy Preservation Techniques for Mobile Ad Hoc Networks: A Review

  464-479

  Opeyemi O. ASAOLU, Oluwasanmi S. ADANIGBO, Temidayo J. AKINDAHUNSI (Author)

  • FJET_21_41_41

• Fabrication, Characterization, and Application of Clay-Based Ceramic Membranes for Oily Wastewater Treatment: A Review

  480-489

  Mu’azu ABUBAKAR, Abubakar B. ALIYU, Dauda GARBA (Author)

  • FJET_21_42_42

• Development of an Ensemble Model for Email Filtering and Classification

  490-499

  Bolaji A. OMODUNBI, Hammed A. OLASUNKANMI (Author)

  • FJET_21_43_43

• Performance Evaluation and Economic Assessment of Electrical Submersible Pumps for Heavy Oil Production in Mature Niger Delta Oilfields

  500-516

  Victoria A. UMEJURU, Isaac E. IHUA-MADUENYI, Adaobi S. NWOSI-ANELE (Author)

  • FJET_21_44_44

• Safety Concerns on the Use of Compressed Natural Gas (CNG) in the Nigerian Automobile Industry

  517-526

  Agbonyososo D. OKPERE, Kenneth K. ADAMA (Author)

  • FJET_21_45_45

• Machine Learning-Driven Recruitment Recommendation System for Employment in Nigerian Universities

  527-537

  Murtala ISMAIL, Mohammed S. ISMAIL, Eli A. JIYA (Author)

  • FJET_21_46_46

• Reducing Electromagnetic Radiation Around the Fourth Generation Base Stations

  538-546

  Christopher C. NWAOGU, Nnamdi AHUCHAOGU (Author)

  • FJET_21_47_47

• Adaptive Hybrid Compliant Control of a Desktop Upper-Limb Rehabilitation Robot

  547-559

  Auwalu M. ABDULLAHI, Musa M. BELLO, Ado HARUNA, Amina I. KHALEEL, Lubabatu B. ILA, Abdurrahaman M. BELLO (Author)

  • FJET_21_48_48

• Development and Characterization of Epoxy-Based Asbestos-Free Brake Pad Composites Reinforced with Cow Hoof Particulates

  560-569

  Mathew O. ADEOTI, Victor N. HARUNA, Omolayo M. IKUMAPAYI, Timothy A. ADEKANYE (Author)

  • FJET_21_49_49

• Performance Evaluation of Pervious Concrete Containing Glass Cullet and Glass Powder for Sustainable Construction

  570-580

  Afeez A. AWOLOKUN, Olusegun O. ALUKO, Temitope F. AWOLUSI, Mayowa A. OGIDI (Author)

  • FJET_21_50_50

• Image Denoising: An Overview of Noise Model, Denoising Methods and Applications

  581-591

  Abdulkabiru A. ABDULRAZAQ, Abideen A. ISMAIL, Muhammad S. NAZRUL-ISLAM, Akeem R. ABIOYE, Margaret D. OKPOR, Paschal, U. CHINEDU (Author)

  • FJET_21_51_51

• Kinetic Study of 4-Nitrophenol Sonocatalytic Degradation

  592-602

  Ahmad ADO, Abdullahi YAHAYA, Abubakar J. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF (Author)

  • FJET_21_52_52

• Electric Fish Optimizer-Based Hyperparameter Tuning of MLP for Fault Diagnosis in Grid-Connected Photovoltaic Systems

  603-611

  Muhammed A. ADAWUDI, Danlami MALIKI, Ibrahim M. ABDULLAHI (Author)

  • FJET_21_53_53

• Impact of Agro-Chemicals on Groundwater Quality and Soils of Irrigation Sites: A Case Study of Chanchaga Irrigation Scheme, Minna, Niger State

  612-620

  Mohammed B. ABDULLAHI (Author)

  • FJET_21_54_54

• Conserving Indigenous Geometries: A Vital Approach to Integrating Cultural Heritage into Architectural Education

  621-632

  Mokọ́ládé JOHNSON, Bashir SALIM, Enobong EQUERE, Miriam I. CHUKWUMA-UCHEGBU, Emma EKPO, Ali B. ABDULSALAM (Author)

  • FJET_21_55_55

• Effects of Quenching Media and Heat Transfer Rate on the Hardness and Microstructure of Low-Carbon Steel

  633-639

  Francis O. BOROKINNI, Olarewaju T. OGINNI, Ridwan O. RAJI, Kolawole ALONGE (Author)

  • FJET_21_56_56

• Machine Learning Based Feature Selection for Early Detection of Thyroid Disorders in Nigeria

  640-653

  Peter S. IDOKO, Iyinoluwa T. IDOWU, Emmanuel O. AYODELE, Temitope F. SHOLANKE, Peter A. IDOWU (Author)

  • FJET_21_57_57

• Optimal Reduction of Technical Power Losses in Radial Distribution Networks Using Differential Evolution for Distributed Generation: A Case Study of the Azare Substation in Nigeria

  654-662

  Muhammad B. MUHAMMAD, Muhammad Y. ABDULLAHI, Aminu BALA (Author)

  • FJET_21_58_58

• Evaluation on the Rheological Properties of Water-Based Drilling Mud: A Case Study of Ire-Ekiti Clay

  663-672

  Joseph O. AJAYI, Adekunle T. ADENIYI, Mufliah G. OMOFOYEWA, Abel A. ADEYI, Abdulwahab GIWA (Author)

  • FJET_21_59_59

• Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach

  673-680

  Aminu D. MAHMUD, Imran N. IBRAHIM (Author)

  • FJET_21_60_60

• Geotechnical Evaluation of Lateritic Soil Index Properties in Ekiti State Districts, Southwestern Nigeria for Road Pavement Construction

  681-686

  Joshua T. AKINWAMIDE, Jacob O. EHIOROBO, Oluwayinka G. AKINWAMIDE (Author)

  • FJET_21_61_61

• Assessment of the Impact of Tractor Noise Exposure on Operators and Bystanders

  687-694

  Beabu B. DUMKHANA, Dandison M. WALI (Author)

  • FJET_21_62_62

• Influence of Process Variables on the Adsorption of Methylene Blue from Aqueous Solution Using Iron-Modified Zeolite A

  695-706

  Esther M. GANA, Umaru MUSA, Abdulsalami S. KOVO (Author)

  • FJET_21_63_63

• Impact of Open Dumpsites on Groundwater Quality: Geophysical and Hydrochemical Evidence from Ijan-Ekiti, Nigeria

  707-714

  Raphina O. UBAH, Oluwaseun S. OGUNGBEMI, Olabode O. OLUTOMILOLA (Author)

  • FJET_21_64_64

• Effects of Gender on Emotional Intelligence in Employability Skills of Technical Education Graduate

  715-723

  Ibrahim H. BAKO, Yusif S. ABU, Fatima ABASHE, Muhammad NURTANTO, Abdullahi RABIU (Author)

  • FJET_21_65_65

• Carbon Capture and Mechanical Design of Membrane Reactors: A Systematic Review and Design-Performance Framework for Sustainable Energy Systems

  724-729

  Abdulrahman B. GAMBO (Author)

  • FJET_21_66_66

• Environmental Impact of Gold Mining Activities and Sustainable Mitigation Approaches: Case Study of Ilesa Surrounding areas, Osun State, Nigeria

  730-743

  Adegboyega L. ALUKO, Ayodeji T. BALOGUN (Author)

  • FJET_21_67_67

• A Comprehensive Review of In-Situ Monitoring and Post-Process Defect Detection in Additive Manufacturing

  744-767

  Tunji J. ERINLE, Daniel C. UGURU-OKORIE, Abiodun M. ADEBIMPE, Adeolu A. ADEDIRAN, Hilary U. EZEA (Author)

  • FJET_21_68_68

• Investigating Breakdown Strength Based on Trapping Profile in Cross-Linked Polyethylene (XLPE) Nanocomposites

  768-774

  Muhammad B. MUHAMMAD, Noor S. B. MANSOR, Fariha R. KHAN (Author)

  • FJET_21_69_69

• Experimental Study on the Characterisation and Thermo-Physical Properties of Graphene-Agro Based Hybrid Nanofluids

  775-783

  Chukwuemeka S. IBEH, Abubakre O. KAMARDEEN, Saka A. ABDULKAREEM, Aliyu A. ABDULLAHI (Author)

  • FJET_21_70_70

• Design and Simulation of a Synchronous Reference Frame-Based Active Power filter for Harmonic Mitigation

  784-794

  Olusegun A. AFOLABI, Olanrewaju A. OLANITE, Nsikan L. AKPAN (Author)

  • FJET_21_71_71

• Software-in-the-Loop Validation of an Adaptive Particle Swarm Optimization-Based MPPT Controller for Real-Time Photovoltaic System

  795-804

  Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN (Author)

  • FJET_21_72_72

• Development and Performance Evaluation of a Modified Active Evaporative Cooling System for Postharvest Preservation of Selected Vegetables

  805-819

  Shehu ABDULKADIR, Dangora N. DAUDA, Aliyu A. ADAMU, Badaru M. SANI, Rilwan ABUBAKAR, Timothy A. TIMOTHY, Uchechukwu M. AGBOM, Abubakar S. ABUBAKAR (Author)

  • FJET_21_73_73

• BAT-Optimized PID and ANFIS Torque-Based MPPT for a 0.5 MW PMSG-Based Wind Energy Conversion System Under Dynamic Wind Conditions

  820-836

  Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN (Author)

  • FJET_21_74_74

• A Review of Local Manufacturing of Borehole Windmill Gear Trains Using Reverse Engineering and Integrated Braking Systems

  837-843

  Jafaru A. MOHAMMED, Thomas N. GUMA, Malachy SUMAILA, Mahdi MAKWAYO (Author)

  • FJET_21_75_75

• Performance Evaluation and Design Analysis of Hybrid Constructed Wetlands for Aquaculture Effluent Treatment under Tropical Conditions

  844-854

  Paramdi S. ABARI, Abdulwahab O. AUDU, Ahmad-Tijani USMAN, Charity T. METIBOBA, Peter O. ANIKOH (Author)

  • FJET_21_76_76

• Effects of Truncating the Height of Compound Parabolic Collector on its Geometry, Optical and Thermal Performances

  855-868

  Bala ABDULLAHI, Bala G. ABDURRAHMAN, Yusuf ALHASAN, Saidu B. ABUBAKAR, Bashir I. KUNYA, Raya K. ALDADAH, Saad MAHMOUD, Ahmed REZK (Author)

  • FJET_21_77_77

• Data-Driven Observability Enhancement in Active Distribution Networks via Optimal Co-Deployment of DGs and D-PMUs Using Hybrid APSO-ASDA

  869-881

  Mela I. L. LASHIRU, Ganiyu A. BAKARE, Sabo M. HASSAN, Kamilu O. LAWAL (Author)

  • FJET_21_78_78

• Predicting Convective Heat Transfer Coefficient in TIG Welding via Adaptive Neuro-Fuzzy Inference System (ANFIS)

  882-890

  Osemwegie IKPONMWOSA-EWEKA, Alexander I. IDEMUDIA (Author)

  • FJET_21_79_79

• Microstructural Characterization of Fibre Reinforced Polymer (FRP) Composite (Kenaf Fibre and Polyester Resin) for Structural Applications

  891-903

  Zachariah S. PYENDANG, Felix ACHEMA, Isheni YAKUBU, Solomon E. APEH (Author)

  • FJET_21_80_80

• Production of Silica from ABU Zaria Dam Sand as an Eco-Friendly Corrosion Inhibitor Using Nanotechnology

  904-909

  Abdulkareem BELLO, Yusuf O. ADEIZA, Saleh S. LUKMAN, Muhammad A. ADAMU, Chibuzor A. OKAFOR, Abdulaziz A. ABDULSALAM (Author)

  • FJET_21_81_81

• Classification of Groundnut Pod Varieties using Histogram-Based Gradient Booster Classifier (HGBC) with Machine Learning Techniques

  910-922

  Benjamin BELLO, Jibril D. JIYA, Aje TOKAN, Ahmed MOHAMMED (Author)

  • FJET_21_82_82

• Microscopic Characterization of Optimized Particleboards Made from Softwood Sawdust and Rice Husk Using Optimized Polystyrene Waste Adhesive

  923-931

  Lucas A. J. HAMIDU (Author)

  • FJET_21_83_83

• Precision Agriculture Technologies for Smallholder Farming Systems in Developing Countries: A Scoping Review of Opportunities, Limitations and Future Directions

  932-937

  Daniel N. MBACHIRIN, David E. ABEL, Paul A. OMALE (Author)

  • FJET_21_84_84

• Impact of Health and Safety Management on Safety Performance of Small and Medium-Sized Construction Firms in Abuja

  938-947

  Habibat O. YUSUFU, Yakubu D. MOHAMMED, Rose JONATHAN, Shamsuddeen SULAIMAN (Author)

  • FJET_21_85_85

• Characterisation of Pumice-Kaolin Refractory Bricks for High Temperature Industrial Applications

  948-959

  James AUDU, Abdulraman A. SALAWU, Muriana R. AREMU, Abdullahi A. ALHAJI, Lawal S. SIUS (Author)

  • FJET_21_86_86

• Drying Kinetics and Combustion Characteristics of Carbonized Cashew Nut Shell Briquettes Under Open Sun, Passive and Active Solar Drying

  960-974

  Sarafa ISHOLA, Olusegun S. OLAOYE, Adeyinka A. ADEGBOLA, Isaac A. OLUREMI, Oluseye O. AGBEDE (Author)

  • FJET_21_87_87

• The Role of Aesthetic Properties of Granitic Dimension Stones on Marketability: A Case Study of CIBI Nigeria Limited, Kaduna State

  975-988

  Kayode A. IDOWU, Victory N. JESSEY, Emmanuel B. SAMANI (Author)

  • FJET_21_88_88

• Design of a Modified Wideband Microstrip Patch Antenna for WLAN/WiMAX Applications

  989-999

  Iliya D. IBRAHIM, Suleiman A. BABALE, Sani H. LAWAN, Auwal A. ABUBAKAR (Author)

  • FJET_21_89_89