From Local Sand to Functional Silicon: An Integrated Pathway for Producing Photovoltaic-Grade Material from Nigerian Silica Sand
- Authors
-
-
Tahiru MOHAMMED
Author
-
Muhammad B. MAINA
Author
-
Abba B. MUHAMMAD
Author
-
Muhammad SHUWA
Author
-
- Keywords:
- Silica sand, purification, carbothermic reduction, upgraded metallurgical-grade silicon (UMG-Si), photovoltaic, local content, Nigeria.
- Abstract
-
Nigeria's significant solar energy potential is constrained by a reliance on imported high-purity silicon, despite abundant indigenous silica sand resources. This study presents a complete, integrated experimental pathway to assess the feasibility of producing photovoltaic-grade silicon from River Alau sand in Borno State. The research encompasses: Comprehensive characterization of raw sand using XRF, XRD, and SEM/EDX; Purification via optimized acid leaching (acid was used to remove impurities) and calcination; Carbothermic reduction at a temperature of 1700◦C was carried out to transform the sample to a metallurgical-grade silicon (MG-Si) and subsequent directional solidification; Evaluation of the electrical and optical properties of the upgraded silicon; and Fabrication and outdoor performance testing of simple solar cells under Maiduguri conditions. The raw sand contained 77.63% SiO₂ with significant impurities (Al₂O₃: 2.10%, K₂O: 6.31%). Purification achieved ≥99.6% SiO₂ purity, reducing key metallic impurities to <0.1%. Carbothermic reduction yielded MG-Si with 78% efficiency, and the upgraded material exhibited suitable properties for PV applications: a resistivity of 4.2 Ω•cm and a band gap of 1.12 eV. Fabricated solar cells generated an open-circuit voltage of 0.48–0.52 V. A preliminary economic analysis suggests a 25–30% potential cost saving in raw material sourcing. This work provides the first proof-of-concept for a viable domestic value chain from Nigerian silica sand to functional photovoltaic silicon, demonstrating technical feasibility and supporting the development of local solar manufacturing capabilities.
- References
- Downloads
- Published
- 29-06-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Yusuf L. SHUAIB-BABATA, Kabiru S. AJAO, Yusuf O. BUSARI, Ibrahim O. AMBALI, Kehinde O. ARUNA, Henrietta O. COKER, Toheeb A. NURUDEEN, Evaluation of UNILORIN Dam Moulding Sand Properties for Foundry Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Joshua T. AKINWAMIDE, Jacob O. EHIOROBO, Oluwayinka G. AKINWAMIDE, Geotechnical Evaluation of Lateritic Soil Index Properties in Ekiti State Districts, Southwestern Nigeria for Road Pavement Construction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abdulkareem BELLO, Yusuf O. ADEIZA, Saleh S. LUKMAN, Muhammad A. ADAMU, Chibuzor A. OKAFOR, Abdulaziz A. ABDULSALAM, Production of Silica from ABU Zaria Dam Sand as an Eco-Friendly Corrosion Inhibitor Using Nanotechnology , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mohammed A. GANA, Zaka A. MSHELIA, Isuwa S. AJI, Alhaji GUJJA, Lawan A.M. KOLO, Investigation and Comparative Analysis of Natural Moulding Sands from Five Deposits in Maiduguri, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Adegboyega L. ALUKO, Ayodeji T. BALOGUN, Environmental Impact of Gold Mining Activities and Sustainable Mitigation Approaches: Case Study of Ilesa Surrounding areas, Osun State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mohammed U. GARBA, Musa A. ABDULLAHI, Isah RABI, Saadatu A. GORO, Habibu UTHMAN, Abubakar S. MOHAMMED, Umaru AHMADU, Usman S. ONODUKU, Recovery of Lithium Carbonate from Nigerian Lepidolite Ore via Roasting-Leaching-Precipitation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Babagoni A. ADAM, Muhammad B. MAINA, Muhammad SHUWA, Abba B. MUHAMMAD, A Review on Neem Leaves Valorization Through Advanced Briquetting and Carbonization Technologies , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Experimental Characterization and Seasonal Energy Potential Assessment of Municipal Solid Waste in Kano City, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Salisu MOHAMMED, Abdulfatai JIMOH, Abdullahi M. EVUTI, Abdulwahab GIWA, Abubakar A. IBRAHIM, Pretreatment and Characterization of Selected Precursors for Chitin/Chitosan Production , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Habib I. ABDULAZEEZ, Bala ABDULLAHI, Abdullahi AHMED, Ibrahim A. TUKUR, Experimental Investigation of Solar Photovoltaic Tilt Angles for Maximum Energy Harvest in Kogi State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
