Vol. 2 No. 2 (2026): December 2026

Articles

• Potential of Zinc Oxide Nanoparticles for Remediation of Oil-Contaminated Soil and Water

  1-7

  Yetunde M. ALADEITAN, Abdulmojeed O. OLUOGUN (Author)

  • 1_Aladeitan and Oluogun (2026)

• Evaluation of Green Architectural Strategies for Thermal Comfort in Four-Star Hotels in Nigeria

  8-19

  Abdulrasheed MUSTAPHA, Kolawole O. MORAKINYO, Seyi O. FARODOYE, Rilwan B. HABEEB, Oluwatimilehin I. ADEBAMBO, Sunday F. OLAWALE (Author)

  • 2_Mustapha et al. (2026)

• A Critical Review of Surrogate Reservoir Modelling for Uncertainty Quantification in Thin Oil Rim Reservoirs

  20-28

  Yetunde M. ALADEITAN, Damilola V. ABRAHAM, Abdulmojeed O. OLUOGUN, Abdulwasiu ABDURRAHMAN (Author)

  • 3_Aladeitan et al. (2026)

• Development and Performance Evaluation of an Injection Moulding Machine for Recycled Polymer Composite Production

  29-44

  Adefemi O. ADEODU, Banjo C. ADEDOKUN, Amos A. ADEGBITE (Author)

  • 4_Adeodu et al. (2026)

• Development of an Ocular Disease Prediction Using Deep Learning

  45-52

  Toyin OKEBULE (Author)

  • 5_Okebule (2026)

• Integration of Green Technologies for Sustainable Facility Management of Public Buildings in Edo State, Nigeria

  53-60

  Ayobami O. IDOWU (Author)

  • 6_Idowu (2026)

• Kinetic Modelling of Sonocatalytic Phenol Degradation over Alumina-Supported Copper Oxide Catalyst

  61-70

  Abdullahi YAHAYA, Ahmad ADO, Jaju A. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF (Author)

  • 7_Yahaya et al. (2026)

• Graph-Augmented Transformers for Hausa Sentiment Analysis: When Does Graph Structure Help?

  71-79

  Hafsa K. AHMAD (Author)

  • 8_Ahmad (2026)

• Performance Evaluation of 3.5 kVA Hybrid Inverter Following Standard Engineering Practices and Safety Procedures

  80-88

  Johnson O. ADEOGO, Olawale J. OLALUYI, Olumuyiwa A. OJO, Abayomi T. AYODELE, Elijah A. OLAJUYIN, Fasasi BELLO, Paul C. OFODU (Author)

  • 9_Adeogo et al. (2026)

• Design and Implementation of a Secure AI-Based Product Showcase and Customer Support System for Small and Medium-Sized Enterprises

  89-101

  Hammed A. OLASUNKANMI, Olumuyiwa I. ADENIJI, Mufutau K. LAWAL, Babatola E. OJO, Babayemi D. OMOWOLE, Somtochukwu E. AVAH, Isiaka A. ADELEKE, Kudirat N. POPOOLA, Ademidun E. IBITOYE (Author)

  • 10_Olasunkanmi et al. (2026)

• Evaluation of Animal Dungs as Alternative Heat-Treating Materials in Foundry Shop

  102-108

  Enoch ADETONA, Oladiran K. ABUBAKRE, Rasheed A. MURIANA, Muhammad N. BALA, Abel A. ADEYI (Author)

  • 11_Adetona et al. (2026)

• Quality Evaluation of Yogurt Produced from Chili Pepper-Derived Starter Culture

  109-114

  Mordecai C. EZEALOR, Bosede A. ORHEVBA, Ruth O. OYEBAMIJI (Author)

  • 12_Ezealor et al. (2026)

• IoT-Based Solar-Powered Flood Early Warning System: Design and Evaluation at Alau Dam, Nigeria

  115-123

  Haris A. DANLADI, Umar Y. MUHAMMAD, Idris Y. IDRIS, Zaharaddeen MUSA (Author)

  • 13_Danladi et al. (2026)

• Experimental and Finite Element Investigation of Thermal Distribution and Heat Flux in an Internal Combustion Engine Cylinder

  124-135

  Sunday IWERIOLOR, Ngozi G. EMORDI, Festus O. ISAAC, Linus CHUKWUKA, Onyekachukwu N. AKPENYI-ABOH, Liberty ANWULE (Author)

  • 14_Iweriolor et al. (2026)

• Physicochemical Characterisation of Mineral Sands from Northwestern Nigeria for Industrial Applications

  136-146

  Usman GARBA, Abdullahi ADAMU, Mamuda MUHAMMAD (Author)

  • 15_Garba et al. (2026)

• Application of Integrated Solar-Powered Ultraviolet Radiation and Sand Biofiltration Techniques in Rural Water Treatment: A Review

  147-157

  Sindrella AWINO, Peter ADEOYE (Author)

  • 16_Awino and Adeoye (2026)

• Improvement of Power Efficiency of Sensor Network Using Ant Colony Optimization and K-Means Clustering Technique

  158-168

  Nsikan L. AKPAN, Akaniyene OBOT, Olusegun A. AFOLABI (Author)

  • 17_Akpan et al. (2026)

• Hydrogen Production from Flare Gas via Steam Methane Reforming: A Simulation-Based Approach

  169-175

  Gbenga G. OSEKE, Chisom S. AMADI, Abubakar U. RAJI (Author)

  • 18_Oseke et al. (2026)

• Influence of Additive Manufacturing Process on the Fatigue of Polymer Materials: A Review

  176-185

  Enakhe P. OTSUPIUS, Nihad ACHEKUOGENE (Author)

  • 19_Otsupius and Achekuogene (2026)

• Design, Simulation, and 3D Printing of a Lightweight Drone Frame for Farm Monitoring

  186-203

  Abdulkareem BELLO, Saleh S. LUKMAN, Tasie M. CHIZE, Yusuf O. ADEIZA, Chibuzor A. OKAFOR, Abdullahi O. YAKUBU (Author)

  • 20_Bello et al. (2026)

• Effects of Completion Fluid Components on Reservoir Rock Matrix and Its Performance for Workover Applications

  204-208

  Gbenga G. OSEKE, Fatima A. SHEHU, Muhammad K. ABBA (Author)

  • 21_Oseke et al. (2026)

• TextCNN and Gated Recurrent Unit(GRU) with Additive Attention for Character-Level Yoruba Spell Correction

  209-218

  Opeyemi O. ASAOLU, Tomilayo F. ADEBIYI, Kazeem M. OLAGUNJU (Author)

  • 22_Asaolu et al. (2026)

• Simulation and Performance Analysis of a Military Insignia Microstrip Patch Antenna at 2.45 GHz For Wireless Applications

  219-232

  Shehu S. SHEHU, Samuel O. OLADIPUPO, Dominic S. NYITAMEN (Author)

  • 23_Shehu et al. (2026)

• Development of Enhanced Coal Briquettes for Domestic Cooking Applications in Nigeria

  233-237

  Abubakar D. ADO, Aminu D. MAHMUD, Jamilu HARUNA, Sadiq S. DODO, Abdullahi YAHAYA (Author)

  • 24_Ado et al. (2026)

• Evaluation of Nano-Hydroxyapatite/Nano-Kaolin Composite Additives on the Physical Properties of Hot Mix Asphalt Binder

  238-258

  Sani MAMOUDOU, Abdulmumin A. SHUAIBU, Aliyu USMAN (Author)

  • 25_Mamoudou et al. (2026)

• An Evaluation of the Porosity and Pore Volume Fractions of Coir Fibres in Relation to Their Diameters and Tensile Properties at a Crosshead Displacement Rate of 0.5 mm/Minute for Composite Applications

  259-264

  Chioma I. MADUEKE, Reginald UMUNAKWE, Oluwole D. ADIGUN (Author)

  • 26_Madueke et al. (2026)

• Characterization of Soil Quality Parameters in Sector 2 of Watari Irrigation Project, Kano

  265-272

  Bala YAHAYA (Author)

  • 27_Yahaya (2026)

• Assessment of Occupational Health Hazards Among Oil Refinery Workers at Kaduna Refining and Petrochemical Company

  273-282

  Raji ABDULRASAK, Abdulaziz S. ALIYU (Author)

  • 28_Abdulrasak and Aliyu (2026)

• Model Selection for Path Loss Prediction of Ultra High Frequency Terrestrial Television

  283-291

  Ayodele S. OLUWOLE, Olumayowa A. OJO, Olaitan AKINSANMI (Author)

  • 29_Oluwole et al. (2026)

• Enhanced Breast Cancer Classification Using Ensemble Learning and Data Resampling Techniques: A Machine Learning Approach

  292-302

  Mohammed K. BASHIR, Sanusi A. DARMA, Usman MAHMUD, Mansir ABUBAKAR (Author)

  • 30_Bashir et al. (2026)

• DSAF-Net: A Dynamic Scale-Aware Attention Fusion Network for Multiclass Brain Tumour Classification from MRI Images

  303-313

  Oluwadare A. ADEBISI, Ibiyemi I. ADEAGA, Samson O. AYANLADE, Khadijah O. LAWAL (Author)

  • 31_Adebisi et al.(2026)

• Decline Curve Analysis of Continuous Injection Gas Lifted Wells

  314-326

  Ayodele DANIEL, Mercy O. AKEJU, Sunday O. ISEHUNWA, Abel A. ADEYI, Adebayo T. OGUNYEMI (Author)

  • 32_Daniel et al. (2026)

• Examination of Electromagnetic Radiation Intensity of 5G Mobile Transceivers Based on Its Operational Techniques

  327-335

  Johnson O. ADEOGO (Author)

  • 33_Adeogo (2026)

• Design and Analysis of a Dual-Band Circular Microstrip Antenna Using Spatially Distributed CSRRs

  336-349

  Israel A. OLUWAFEMI, Akaninyene B. OBOT, Emmanuel UBOM, Ayodele A. OLATUNJI, Mbuotidem G. ROBINSON (Author)

  • 34_Oluwafemi et al. (2026)

• Snail Shell-Clay Ceramic Composites as Sustainable Raw Materials for High-Voltage Insulators

  350-361

  Ferguson H. TOBINS, Ishiaka S. ARUDI, Abdulhakeem H. NURUDEEN (Author)

  • 35_Tobins et al. (2026)

• An Assessment of Management Support Provided to Construction Equipment Operators Regarding Safety Practices and Protocols in Nigeria

  362-369

  Usman HASSAN (Author)

  • 36_Hassan (2026)

• A Review on Solar Water Heating System in Nigeria

  370-382

  Abdulyakin USMAN, Ibrahim A. RUFAI, Dalhatu B. YAHAYA (Author)

  • 37_Usman et al. (2026)

• Evaluation of Challawa Tannery Wastewater as Mixing and Curing Water for Concrete Production

  383-390

  Ahmad IDRIS (Author)

  • 38_Idris (2026)

• Detecting and Mitigating Cybersecurity Threats in Nigerian Commercial Banks Using Machine Learning: A Case Study of Selected Institutions

  391-397

  Folakemi B. OYEYEMI, Usman A. ABDURRAHMAN (Author)

  • 39_Oyeyemi and Abdurrahman (2026)

• Assessment of the Suitability of Wusasa Clay for Refractory Bricks Production

  398-409

  Ameh RICHARD, Sani B. MUHAMMAD, Terver AUSE, Umar SHEHU (Author)

  • 40_Richard et al. (2026)