Plastic Waste Challenges in Nigeria: A Review on Pollution, Sorting, and Recycling Approaches
- Authors
-
-
Chioma I. MADUEKE
Author
-
Audu YEMI
Author
-
Joseph M. ABIDEMI
Author
-
Eberechukwu C. DIM
Author
-
- Keywords:
- Plastic waste, recycling, environment, pollution, Nigeria.
- Abstract
-
Plastic waste has become one of the most persistent environmental challenges in Nigeria, rather driven by continuous growth in population, urbanization, industrialization, increasing consumption of packaged goods, and inadequate waste-management infrastructure The widespread use of plastics has become an integral part of modern life, with applications spanning household products, packaging materials, electrical and electronic appliances, structural components, medical devices, and advanced scientific equipment. In Nigeria, plastic consumption has increased substantially without a corresponding improvement in the collection, treatment, and disposal of the resulting waste. The problem is particularly pronounced in major commercial centers such as Lagos, Kano, Port Harcourt, Aba in Abia State, Onitsha in Anambra State, and other densely populated commercial areas across the country. Common plastic wastes include polyethylene bags, polyethylene terephthalate (PET) bottles, high-density polyethylene (HDPE) sachets used for packaged water, polystyrene disposable food containers and cutlery, polypropylene products such as broken chairs, low-density polyethylene (LDPE) shrink wraps, and numerous other materials belonging to the polymer family. The indiscriminate disposal of these materials has created serious environmental challenges in many communities. Plastic waste often accumulates in streets and drainage channels, obstructing water flow and providing suitable breeding grounds for mosquitoes, thereby contributing to environmental and public-health concerns. This article examines the environmental and ecological hazards associated with plastic waste and reviews both immediate and long-term strategies for reducing plastic pollution, highlighting sustainable approaches for improving waste management, safeguarding the environment, and protecting the lives of plants and animals. This review is more of a narrative review than other types, as this work mostly dwells on discussions on plastic pollution, sources, sorting, recycling, environmental impacts, economic value and recycling approaches by selecting relevant studies and discussing them systematically with findings synthesized qualitatively and research gaps highlighted.
- References
- Downloads
- Published
- 11-10-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Chioma I. MADUEKE, Audu YEMI, Joseph M. ABIDEMI, Eberechukwu C. DIM (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Dauda ALI, Auwal SHUAIBU, Design and Performance Evaluation of Plastic–Sand Interlocking Blocks Using Waste Polyethylene Terephthalate (PET) and Low-Density Polyethylene (LDPE) for Sustainable Construction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Samaila J. EL-PATEH, Ibrahim IDRIS, Waste Management in Bauchi Metropolis: Solid Measure and Characterization in Municipality , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oyeyemi T. AFOROLAGBA-BALOGUN, Olumide A. TOWOJU, Characterization of Fuel Produced from Nylon (Polyamide) and Polyethylene Terephthalate (PET) Wastes with Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Benedict O. EDENSETING, Innocent O. OBOH, Alexander A. JOCK, Effective Food Waste Utilization: A Veritable Source of Biofuel for Nigerian Economic Sustenance and Development - A Review , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Raphina O. UBAH, Oluwaseun S. OGUNGBEMI, Olabode O. OLUTOMILOLA, Impact of Open Dumpsites on Groundwater Quality: Geophysical and Hydrochemical Evidence from Ijan-Ekiti, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yetunde M. ALADEITAN, Abdulmojeed O. OLUOGUN, Potential of Zinc Oxide Nanoparticles for Remediation of Oil-Contaminated Soil and Water , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Amina N. IBRAHIM, Petrus NZEREM, Mojeed O. OLOGUN, Formulation and Evaluation of Drilling Fluids from Waste Engine Oil and Algae-Based Surfactants , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Experimental Characterization and Seasonal Energy Potential Assessment of Municipal Solid Waste in Kano City, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Martins Y. OTACHE, Iyanda M. ANIMASHAUN, Sadeeq A. MOHAMMED, Emmanuel O. AGBESE, Spatiotemporal Variability and Trend Analysis of Rainfall and Temperature in Northern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Chioma I. MADUEKE, Reginald UMUNAKWE, Oluwole D. ADIGUN, An Evaluation of the Porosity and Pore Volume Fractions of Coir Fibres in Relation to Their Diameters and Tensile Properties at a Crosshead Displacement Rate of 0.5 mm/Minute for Composite Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
