Performance Evaluation of an Additive in Formic Acid Blend for Well Stimulation
- Authors
-
-
Stephen G. UDEAGBARA
Author
-
Judith A. KAINE
Author
-
Ayodele DANIEL
Author
-
Ifeanyi A. OGUAMAH
Author
-
- Keywords:
- Formation Damage, Stimulation, Acid Concentrations, Reservoir rock.
- Abstract
-
This study investigates and evaluates acidizing operations with a view to identifying causes of acidizing failures and develop an efficient method of incorporating Sodium Lauryl Sulphate (SLS) in acid blend for stimulation to enhance the performance of acidized oil wells. Acid blend of formic and hydrochloric acid was prepared in the concentration of 9%-12% and both calcium carbonate and sandstone rock samples were dissolved in the blend of different concentrations. SLS was incorporated in same concentrations of the acid blend and dissolution of rock samples were carried out as well. However, SLS in acid blend solution was found to be more effective than the solution without SLS. This is attributed to the fact that SLS has a strong amphiphilic property and its incorporation in acid blend would definitely be very effective in displacement of the oil out of the region to be stimulated. For the acid blend (0.3ml) with SLS in Calcium carbonate rock, 13.67% of the particles were dissolved while 8.38% were removed for sandstone in 0.1 ml acid blend concentration with same volume of SLS. For the acid blend (0.1ml) without SLS on Calcium carbonate rock, 8.74% of the particles plugging the pores were dissolved while 5.91% for 0.1 ml acid blend on sandstone were eliminated. The acid blends solution with and without SLS were applied to mud cake and they were able to dissolve the mud cake over an extended reaction time. Nevertheless, the solution with SLS proved to be more effective. 89% of the mud cake was dissolved in 0.1 ml concentration of the acid blend with SLS while 82.5% of the same mud cake was dissolved in 0.1 ml acid concentration without SLS. Since all dissolution in rocks investigated indicated positive response to contaminant reduction, it could be concluded that acidizing if properly executed will reduce or cure damage around the wellbore.
- References
- Downloads
- Published
- 25-09-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Stephen G. UDEAGBARA, Judith A. KAINE, Ayodele DANIEL, Ifeanyi A. OGUAMAH (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Gbenga G. OSEKE, Fatima A. SHEHU, Muhammad K. ABBA, Effects of Completion Fluid Components on Reservoir Rock Matrix and Its Performance for Workover Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Adegboyega L. ALUKO, Ayodeji T. BALOGUN, Environmental Impact of Gold Mining Activities and Sustainable Mitigation Approaches: Case Study of Ilesa Surrounding areas, Osun State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Raphina O. UBAH, Oluwaseun S. OGUNGBEMI, Olabode O. OLUTOMILOLA, Impact of Open Dumpsites on Groundwater Quality: Geophysical and Hydrochemical Evidence from Ijan-Ekiti, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mohammed U. GARBA, Usman B. ABDULLAHI, Hayatudden S. BARAYAIS, Aisha B. FARUQ, Suleiman IDRIS, Abubakar M. MUHAMMAD, Abubakar S. MOHAMMED, Treatment of Gold Mining Wastewater: A Review of Current Technologies and Future Perspectives , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad B. MUHAMMAD, Noor S. B. MANSOR, Fariha R. KHAN, Investigating Breakdown Strength Based on Trapping Profile in Cross-Linked Polyethylene (XLPE) Nanocomposites , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yusuf L. SHUAIB-BABATA, Kabiru S. AJAO, Yusuf O. BUSARI, Ibrahim O. AMBALI, Toheeb A. NURUDEEN, John A. OKOLO, Gabriel A. LONGE, Inhibitory Potential of Blended Parkia biglobosa and Delonix regia Extracts on Corrosion of AISI 1007 Steel in 1.0 M Hydrochloric Acid Medium , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Salisu MOHAMMED, Abdulfatai JIMOH, Abdullahi M. EVUTI, Abdulwahab GIWA, Abubakar A. IBRAHIM, Pretreatment and Characterization of Selected Precursors for Chitin/Chitosan Production , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Yetunde M. ALADEITAN, Damilola V. ABRAHAM, Abdulmojeed O. OLUOGUN, Abdulwasiu ABDURRAHMAN, A Critical Review of Surrogate Reservoir Modelling for Uncertainty Quantification in Thin Oil Rim Reservoirs , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Emmanuel O. AGBENYI, Adefope OWOJORI, Oluwadare J. AKINDUGBAGBE, Babatunde ADEBO, Chigbo I. OKEREKE, Impact Assessment of Natural Radionuclides in Cassava Tubbers Harvested from a Farmlands Around Quarry in Moniya Ibadan, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar A. IBRAHIM, Fatimah Y. GARBA, Fatimah A. MUHAMMAD, Ismail B. ADEFESO, Bello A. ISAH, Jacob OLAYIWOLA, Industrial and Biomedical Applications Biobased Polymers of Polylactic Acid and Polyhydroxybutyrate: A Review , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Ayodele DANIEL, Mercy O. AKEJU, Sunday O. ISEHUNWA, Abel A. ADEYI, Adebayo T. OGUNYEMI, Decline Curve Analysis of Continuous Injection Gas Lifted Wells , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
