Valorisation of Non-Citrus Lignocellulosic Leaf Waste for Limonene Production Using Calcium Hydroxide-Catalysed Thermal Ethanolysis
- Authors
-
-
Haruina IBRAHIM
Author
-
Abubakar M. ALI
Author
-
Mohammed D. JIBRIN
Author
-
- Keywords:
- Alkaline catalysis; Biomass valorisation; Box–Behnken design; Gmelina arborea; Limonene.
- Abstract
-
The increasing demand for sustainable and renewable sources of industrial chemicals has intensified interest in the valorisation of lignocellulosic biomass into value-added products such as monoterpenes. This study investigates the production of limonene from Gmelina arborea leaf waste via a calcium hydroxide–catalysed thermal Ethanolytic process operated under mild conditions. A three-factor Box–Behnken design within the framework of Response Surface Methodology (RSM) was employed to evaluate the effects of reaction temperature (40-60 oC), reaction time (40–60 min), and catalyst loading (1-2 wt.%) on limonene yield, and to develop a predictive quadratic model for process optimisation. Experimental results revealed significant variation in limonene yield (18.75-351.07 mg/g), with a maximum yield of 6.78% (351.07 mg/g) achieved at 40 oC, 50 min, and 2% catalyst loading. Analysis of variance (ANOVA) indicated that the model was highly significant (p < 0.0001) with a high coefficient of determination (R2 = 0.974), confirming strong agreement between experimental and predicted values. All process variables exhibited significant linear and quadratic effects, while interaction effects between temperature–time and temperature–catalyst loading were also notable. Reproducibility assessment using replicated centre-points yielded a low coefficient of variation (CV = 2.25%), demonstrating excellent experimental precision and reliability. GC-MS analysis confirmed the successful formation of limonene, while the results showed that lower temperatures favour product stability by minimising thermal degradation and volatilisation losses. Although the yield is lower than that obtained from citrus-derived sources, this study demonstrates the technical feasibility of producing limonene from non-citrus lignocellulosic biomass using a low-energy catalytic process. The findings highlight the potential of Gmelina arborea leaves as an alternative renewable feedstock and contribute to advancing sustainable biomass conversion strategies within a circular bioeconomy framework.
- References
- Downloads
- Published
- 25-09-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Haruina IBRAHIM, Abubakar M. ALI, Mohammed D. JIBRIN (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Tina I. FRANCIS-AKILAKI, Raymond A. EKEMUBE, Design, Construction, and Performance Evaluation of an Efficient Ethanol Stove for Domestic Cooking Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- George AKWEC, Segun E. ADEBAYO, Caroline O. ALENOGHENA, Design and Construction of Forced-Air Heating systems for Poultry Brooding: A Comprehensive Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Sulaiman Y. ADAMU, Fadimatu N. DABAI, Abdulazeez Y. ATTA, Baba Y. JIBRIL, Preparation and Characterization of Enhanced Hierarchical Zn-Ni/HZSM-5 Catalysts for Potential use in Catalytic reactions to Upgrade Bio-Oil and Hydrogen from Biomass Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abdulkarim AMINU, Mohammed ALIYU, Ibrahim S. MOHAMMED, Iyanda M. ANIMASHAUN, Peter DANIEL, Mohammad USMAN, Production and Optimisation of Parameters for Density and Ash Content of Briquettes Produced from Sorghum Stalks and Groundnut Shells Using African Locust Bean (Parkia biglobosa) Pulp as a Binding Agent , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Yahaya U. JAURO, Danladi D. USMAN, Lawan G. ABUBAKAR, Yusuf G. SHIMBURA, Aminu MOHAMMED, Design and Fabrication of Tapered Screw Briquetting Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Joseph K. ZAMBWA, Jibril M. KAURA, Ocholi AMANA, Abdrasheed S. ABDURASHEED, Ejembi WILLIAMA, Evaluation of Materials and Performance Characteristics of Tannery Sludge Crumb Rubber Concrete (TSCRC) , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Jamesmary E. AYANRU, Matthew S. ABOLARIN, Omotayo I. OGUNWEDE, Henry I. MORKAH, Adeshola O. OPENIBO, Development and Performance Evaluation of a Dryer for Preserving Vegetable Leaves , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abdulrahman B. GAMBO, Carbon Capture and Mechanical Design of Membrane Reactors: A Systematic Review and Design-Performance Framework for Sustainable Energy Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Iliya D. IBRAHIM, Suleiman A. BABALE, Sani H. LAWAN, Auwal A. ABUBAKAR, Design of a Modified Wideband Microstrip Patch Antenna for WLAN/WiMAX Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ibrahim BALA, Solomon M. DAUDA, Audu A. BALAMI, Peter A. IDAH, Design Analysis of a Kenaf Decorticating Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Abubakar M. ALI, Haruna IBRAHIM, Ephraim G. KEFAS, Thermal Plasma Gasification of Municipal Solid Waste: Principles, Technological Advances, Challenges, and Future Prospects , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
