Reducing Electromagnetic Radiation Around the Fourth Generation Base Stations
- Authors
-
-
Christopher C. NWAOGU
Author
-
Nnamdi AHUCHAOGU
Author
-
- Keywords:
- Electric field strength, Magnetic Field strength, Power density, electromagnetic radiation, filters.
- Abstract
-
Electromagnetic radiations and interferences, poses health hazards both to man and his environment the importance of reducing it cannot be over emphasized. This work focused on the reduction of electromagnetic interference (EMI) around 4G base station using filter techniques. The projected rise in wireless communication network generations and the inherent electromagnetic emission that come along with the technologies have necessitated the search for better ways of reducing the electromagnetic interference. Considering the current electromagnetic interference concerns, the base station is the hub of the electromagnetic interference. This research examined different ways of deploying the finite impulse response filters (FIR) at the base station level to help reduce the impact of EMI around the 4G base stations. The research adopted the finite impulse response (FIR) filter technique, which is connected at the transceiver point at the base station level. The data used for analysis in the developed model were extracted from the daily collection of data from the service provider operators. Electromagnetic interference (EMI) for the filtered and unfiltered base stations were analyzed using the International Commission on Non-Ionizing Radiation Protection (ICNIRP) model. Data for five 4G base station within the Umuahia metropolis were used. The results obtained for 4G base stations showed that the deployment of Filter reduced the electromagnetic power density around a 4G base station. As without the filters the power densities were 3.755, 2.708, 1.280, 0.681, 0.412, 0.273, 0.193, 0.144, 0.111, 0.088 and 0.072. On the deployment of the FIR filters the power densities were reduced to 3.552, 2.562, 1.211, 0.645, 0.390, 0.258, 0.183, 0.105, 0.083 and 0.068 respectively.
- References
- Downloads
- Published
- 25-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Bosede A. ORHEVBA, Sodeeq A. OLAJIDE, Optimization of Alkaline Pretreatment and Fermentation Conditions for Improved Physicochemical Properties and Yield of Bioethanol Produced from Sugarcane Bagasse , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Israel A. OLUWAFEMI, Akaninyene B. OBOT, Emmanuel UBOM, Ayodele A. OLATUNJI, Mbuotidem G. ROBINSON, Design and Analysis of a Dual-Band Circular Microstrip Antenna Using Spatially Distributed CSRRs , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Yetunde M. ALADEITAN, Damilola V. ABRAHAM, Abdulmojeed O. OLUOGUN, Abdulwasiu ABDURRAHMAN, A Critical Review of Surrogate Reservoir Modelling for Uncertainty Quantification in Thin Oil Rim Reservoirs , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Usman GARBA, Abdullahi ADAMU, Mamuda MUHAMMAD, Physicochemical Characterisation of Mineral Sands from Northwestern Nigeria for Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Hillary T. OGBODO, Bilkisu L. MUHAMMAD-BELLO, Joshua ABAH, Saleh E.-Y. ABDULLAHI, Quantum Computing Applications in Software Engineering: A Scoping Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Oluwadare A. ADEBISI, Ibiyemi I. ADEAGA, Samson O. AYANLADE, Khadijah O. LAWAL, DSAF-Net: A Dynamic Scale-Aware Attention Fusion Network for Multiclass Brain Tumour Classification from MRI Images , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Aminu D. MAHMUD, Imran N. IBRAHIM, Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN, Software-in-the-Loop Validation of an Adaptive Particle Swarm Optimization-Based MPPT Controller for Real-Time Photovoltaic System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Suleiman ZUBAIR, Hassan ABDULAZEEZ, Bala A. SALIHU, Abubakar A. SHUAIBU, Design and Implementation of a BLE 5.0-Enabled Wearable Finger Mouse Using the XIAO nRF52840 Platform , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
