Reducing Electromagnetic Radiation Around the Fourth Generation Base Stations
- Authors
-
-
Christopher C. NWAOGU
Author
-
Nnamdi AHUCHAOGU
Author
-
- Keywords:
- Electric field strength, Magnetic Field strength, Power density, electromagnetic radiation, filters.
- Abstract
-
Electromagnetic radiations and interferences, poses health hazards both to man and his environment the importance of reducing it cannot be over emphasized. This work focused on the reduction of electromagnetic interference (EMI) around 4G base station using filter techniques. The projected rise in wireless communication network generations and the inherent electromagnetic emission that come along with the technologies have necessitated the search for better ways of reducing the electromagnetic interference. Considering the current electromagnetic interference concerns, the base station is the hub of the electromagnetic interference. This research examined different ways of deploying the finite impulse response filters (FIR) at the base station level to help reduce the impact of EMI around the 4G base stations. The research adopted the finite impulse response (FIR) filter technique, which is connected at the transceiver point at the base station level. The data used for analysis in the developed model were extracted from the daily collection of data from the service provider operators. Electromagnetic interference (EMI) for the filtered and unfiltered base stations were analyzed using the International Commission on Non-Ionizing Radiation Protection (ICNIRP) model. Data for five 4G base station within the Umuahia metropolis were used. The results obtained for 4G base stations showed that the deployment of Filter reduced the electromagnetic power density around a 4G base station. As without the filters the power densities were 3.755, 2.708, 1.280, 0.681, 0.412, 0.273, 0.193, 0.144, 0.111, 0.088 and 0.072. On the deployment of the FIR filters the power densities were reduced to 3.552, 2.562, 1.211, 0.645, 0.390, 0.258, 0.183, 0.105, 0.083 and 0.068 respectively.
- References
- Downloads
- Published
- 25-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Ojochide P. DAMIAN, Fadimatu N. DABAI, Abdulwasiu ABDURRAHMAN, Kamiludeen OLANREWAJU, Bilyamin ABDULMUMIN, Grace A. OLUGBENGA, A Simulation-Driven Strategy for Improved Expandable Polystyrene Synthesis via Multi-Stage Initiator Dosing , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Samuel O. OLADIPUPO, Dominic S. NYITAMEN, Lanre S. MOJEREOLA, Design, Simulation and Fabrication of a Slot Loaded 2.45 GHz Microstrip Patch Antenna for ISM Band Wireless Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Titilope A. BANJOKO, Bilkisu L. MUHAMMAD-BELLO, Predicting Requirement Change Using Bayesian Networks on Historical Traceability Data , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Munir A. ADEWOYE, Ahmed ALIYU, Usman A. ALI, Abdulrasheed JIMOH, Blockchain-Based Food Supply Chain Traceability: A Systematic Review of Privacy Preserving and Scalability , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Suleiman ZUBAIR, Hassan T. ABDULAZEEZ, Bala A. SALIHU, Gambo MOHAMMED, A Low-Cost, Offline-Capable Wireless Soil Moisture Monitoring System for Smallholder Farmers: Design, Validation, and Agronomic Impact , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Oluwaseun S. OGUNGBEMI, Geophysical Approach to Groundwater Resource Appraisal in Afe Babalola University, Ado-Ekiti, Southwestern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sati C. NSHOL, Saeed Y. UMAR, Suleiman A. YERO, Modification of the Engineering Properties of Road Base Course Soil Materials with Cement and Polyethylene Terephthalate (PET) , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Adefemi O. ADEODU, Banjo C. ADEDOKUN, Amos A. ADEGBITE, Development and Performance Evaluation of an Injection Moulding Machine for Recycled Polymer Composite Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Nnamdi S. OKOMBA, Adedayo A. SOBOWALE, Adebimpe O. ESAN, Bolaji A. OMODUNBI, Taiwo A. AWOYEMI, Development of a High Blood Pressure and Hypoxemia Measuring Device , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Umar A. ADAMU, Ya’u S. HARUNA, Ganiyu A. BAKARE, Buhari H. MAMMAN, Kunduli MUSTAPHA, Hadi M. ADAMU, Ismaila MAHMUD, Design and Simulation of a 200 MWp Floating Solar PV Plant Integrated with the Kainji Hydropower Plant, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
