Modelling and Performance Optimization of a Dual Fuel Mode Power Generation System (A Case Study of Allanblackia floribunda Seed Oil)
- Authors
-
-
Ayodeji T. BALOGUN
Author
-
Onoghwarite E. OHIOMOR
Author
-
Adegboyega L. ALUKO
Author
-
- Keywords:
- Modelling; Optimization; Performance, Allanblackia floribunda Seed Oil.
- Abstract
-
This study focuses on the optimization of a small-scale, spark-ignition power generation system operating on a dual fuel arrangement of petrol and Liquefied Petroleum Gas (LPG) The research addresses the challenge of calibrating such systems for optimal performance, which volves balancing often conflicting objectives like fuel efficiency, power output, and emissions A Response Surface Methodology (RSM) framework, employing a Central Composite Design (CCD) of experiments, was used to investigate the effects of five key operating parameters Engine Load, Generator Speed, Ignition Timing, Air-Fuel Ratio, and Compression Ratio Empirical quadratic models were developed and validated to predict key responses Brake Thermal Efficiency (BTE), Specific Fuel Consumption (SFC), Carbon Monoxide (CO), and Nitrogen Oxides (NOx) emissions, and Power Output The Desirability Function Approach was then applied for multi-response optimization to identify the bestcompromise operating conditions for both petrol and LPG modes. The results demonstrate that while both fuels can achieve nearly identical thermal efficiency at their respective optima, LPG operation enables a 22 9% higher power output. However, this is accompanied by a 5.56% increase in mass-based fuel consumption and significant increases in CO (66.2%) and NOx (14.1%) emissions under the high-load optimization strategy The study concludes that LPG is a superior fuel for applications demanding high power density, provided that the increased emissions are managed through targeted calibration or after-treatment, the Allanblankia florrbunda Seed Oil was used as case study, thereby offering a viable path for cleaner and more powerful decentralized electricity generation.
- References
- Downloads
- Published
- 25-09-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Ayodeji T. BALOGUN, Onoghwarite E. OHIOMOR, Adegboyega L. ALUKO (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Oluyemi S. ONIFADE, Olusegun O. AJIDE, Development and Performance Evaluation of a Semi-Automated Impact Fracture Tester , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN, Software-in-the-Loop Validation of an Adaptive Particle Swarm Optimization-Based MPPT Controller for Real-Time Photovoltaic System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Bala I. ABDULKARIM, Umar IDRISS, Synthesis and Characterization of Laggera aurita-Derived KOH Activated Carbon (LAKOHAC) and Role for the Adsorption of Water-Soluble Fraction of Benzene (WSFB) in Oil-Spilled Water , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ismaila MAHMUD, Mahmud MUSTAPHA, Sulaiman H. SULAIMAN, Ibrahim ABDULWAHAB, Ibrahim A. SHEHU, Aminu J. ALIYU, Yusuf S. ABU, Nuraddeen A. ILIYASU, Solar Irradiance Forecast using Feed Forward Neural Network: A Case Study of Zaria Town , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ayodele S. OLUWOLE, Olumayowa A. OJO, Olaitan AKINSANMI, Model Selection for Path Loss Prediction of Ultra High Frequency Terrestrial Television , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Zaharaddeen MUSA, Aliyu BELLO, Haris A. DANLADI, Design and Construction of Dual Input Mobile Solar Generator for Reliable Off-Grid Power , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Omokhafe J. TOLA, Garba AMBAFI, Emmanuel C. OBUAH, Isah N. ABUBAKAR, Mutiat S. YISA, Development of Energy-Aware Hamiltonian-Based Fixed-Time Chaos Control and Synchronisation of Brushless DC Motor for Electric Vehicle Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Oluwasanmi S. ADANIGBO, Opeyemi O. ASAOLU, Adedayo A. SOBOWALE, Temidayo AKINDAHUNSI, Akinbayode A. ASAOLU, Intrusion Detection in Mobile Adhoc Networks: A Review of Signature-Based, Anomaly-Based, and Hybrid Approaches , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar D. ADO, Aminu D. MAHMUD, Jamilu HARUNA, Sadiq S. DODO, Abdullahi YAHAYA, Development of Enhanced Coal Briquettes for Domestic Cooking Applications in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Olusegun A. AFOLABI, Olanrewaju A. OLANITE, Nsikan L. AKPAN, Design and Simulation of a Synchronous Reference Frame-Based Active Power filter for Harmonic Mitigation , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
