Modelling and Performance Optimization of a Dual Fuel Mode Power Generation System (A Case Study of Allanblackia floribunda Seed Oil)
- Authors
-
-
Ayodeji T. BALOGUN
Author
-
Onoghwarite E. OHIMOR
Department of Chemical Engineering, Federal University of Petroleum Resources, Effurun, Delta State, Nigeria
Author
-
Adegboyega L. ALUKO
Author
-
- Keywords:
- Modelling; Optimization; Performance, Allanblackia floribunda Seed Oil.
- Abstract
-
This study focuses on the optimization of a small-scale, spark-ignition power generation system operating on a dual fuel arrangement of petrol and Liquefied Petroleum Gas (LPG) The research addresses the challenge of calibrating such systems for optimal performance, which volves balancing often conflicting objectives like fuel efficiency, power output, and emissions A Response Surface Methodology (RSM) framework, employing a Central Composite Design (CCD) of experiments, was used to investigate the effects of five key operating parameters Engine Load, Generator Speed, Ignition Timing, Air-Fuel Ratio, and Compression Ratio Empirical quadratic models were developed and validated to predict key responses Brake Thermal Efficiency (BTE), Specific Fuel Consumption (SFC), Carbon Monoxide (CO), and Nitrogen Oxides (NOx) emissions, and Power Output The Desirability Function Approach was then applied for multi-response optimization to identify the bestcompromise operating conditions for both petrol and LPG modes. The results demonstrate that while both fuels can achieve nearly identical thermal efficiency at their respective optima, LPG operation enables a 22 9% higher power output. However, this is accompanied by a 5.56% increase in mass-based fuel consumption and significant increases in CO (66.2%) and NOx (14.1%) emissions under the high-load optimization strategy The study concludes that LPG is a superior fuel for applications demanding high power density, provided that the increased emissions are managed through targeted calibration or after-treatment, the Allanblankia florrbunda Seed Oil was used as case study, thereby offering a viable path for cleaner and more powerful decentralized electricity generation.
- References
- Downloads
- Published
- 25-09-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Ayodeji T. BALOGUN, Onoghwarite E. OHIOMOR, Adegboyega L. ALUKO (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Paramdi S. ABARI, Abdulwahab O. AUDU, Ahmad-Tijani USMAN, Charity T. METIBOBA, Peter O. ANIKOH, Performance Evaluation and Design Analysis of Hybrid Constructed Wetlands for Aquaculture Effluent Treatment under Tropical Conditions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Usman A. ABDURRAHMAN, Abdulkadir A. BICHI, Usman HARUNA, Akibu M. ABDULLAHI, A Hybrid Graph Neural Network Framework Integrating Handcrafted Features for Real-Time Iris Recognition in Motion , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mathew O. ADEOTI, Victor N. HARUNA, Omolayo M. IKUMAPAYI, Timothy A. ADEKANYE, Development and Characterization of Epoxy-Based Asbestos-Free Brake Pad Composites Reinforced with Cow Hoof Particulates , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Samuel E. CHUKWU, Martins Y. OTACHE, Precious O. ATEMOAGBO, Emmanuel O. AGBESE, Copula-Based Modelling of Drought Severity-Duration-Frequency Relationship of Sokoto-Rima-River Basin, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala ABDULLAHI, Bala G. ABDURRAHMAN, Yusuf ALHASAN, Saidu B. ABUBAKAR, Bashir I. KUNYA, Raya K. ALDADAH, Saad MAHMOUD, Ahmed REZK, Effects of Truncating the Height of Compound Parabolic Collector on its Geometry, Optical and Thermal Performances , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adekunle A. YEKINNI, Adeniyi O. ADESINA, Kazeem A. BELLO, Effect of Subcritical Tempering on the Microstructural, Mechanical and Corrosion Behaviour of Mild Steel , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Afeez A. AWOLOKUN, Olusegun O. ALUKO, Temitope F. AWOLUSI, Mayowa A. OGIDI, Performance Evaluation of Pervious Concrete Containing Glass Cullet and Glass Powder for Sustainable Construction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Daniel N. MBACHIRIN, David E. ABEL, Paul A. OMALE, Precision Agriculture Technologies for Smallholder Farming Systems in Developing Countries: A Scoping Review of Opportunities, Limitations and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Gbenga G. OSEKE, Fatima A. SHEHU, Muhammad K. ABBA, Effects of Completion Fluid Components on Reservoir Rock Matrix and Its Performance for Workover Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Fadimatu N. DABAI, Abdulkadir M. SANI, Abdulwasiu ABDURRAHMAN, Comparative Study of Thermal, Catalyst-Mediated, Biomass-Assisted, and Combined Upgrading Routes for Nigerian Bitumen over a Hierarchical CoMo/ZSM-5 Zeolite Catalyst , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
