An Assessment of Power Sources for Improved Energy Supply in University of Maiduguri
- Authors
-
-
Muhammad M. HAMIDU
Department of Mechanical Engineering, University of Maiduguri, Maiduguri, Nigeria
Author
-
Abubakar M. EL-JUMMAH
Department of Mechanical Engineering, University of Maiduguri, Maiduguri, Nigeria
Author
-
Muhammad SHUWA
Department of Mechanical Engineering, University of Maiduguri, Maiduguri, Nigeria
Author
-
- Keywords:
- Assessment, power sources, electricity supply, University of Maiduguri.
- Abstract
-
University of Maiduguri makes use of Electricity supply from the National grid and diesel powered generators along site solar supply. This assessment was prompted by disruptions in electricity supply, exacerbated by rising diesel prices and commercialized electricity tariffs. The study aims to evaluate the impact of electricity costs and reasons behind the choice of alternative power sources for the University, focusing on the comparative costs over a projected ten-year period. In order to effectively carry out the assessment, this work compares the design of the combined analysis of solar and diesel power plants to the national grid commercial supply. A methodological approach was adopted, combining quantitative data analysis with interviews to gather insights. Data was analyzed using Excel for forecast projections. The findings indicate that over ten years, the total projected costs for electricity supply are ₦90.82 billion for the national grid, ₦34.02 billion for diesel generators, and ₦21.38 billion for solar energy. While electricity from the national grid incur the highest costs, the solar system offers the most economical solution. Interviews revealed that the high costs of energy are influenced not only by direct pricing from the national grid and diesel but also by consumer behavior. Increasing awareness and educating users about energy conservation could significantly alleviate energy expenses within the university. Given these findings, it is recommended to pursue a complete installation of solar power systems at the University of Maiduguri. Furthermore, investigating hybrid power solutions, such as combining solar with wind energy, is suggested for enhanced efficiency and effectiveness in electricity supply.
- References
- Downloads
- Published
- 06-10-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Ibrahim M. GANA, Abdullahi YUSUF, Agidi GBABO, Micheal EPHRAIM, Abubakar M. HASSAN, Development and Testing of an Automated Solar-Powered Nutrient Film Technique (NFT) Hydroponic Planting System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Anthony U. AINETOR, Martins ILEVBARE, Awareness of the Availability and Use of Domestic Control Systems and Automation among the University of Benin Resident Staff , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Rhoda I. ADELAJA, Ruth R. ADELAJA, Henry OTOBRISE, Adefope OWOJORI, Babatunde ADEBO, Assessment of Outdoor Radiation Exposure in an Academic Environment: A Case Study of Lead City University , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Adesoye S. ADEGOKE, Lateef A. OTEGBEYE, Olufemi S. SONEYE, Oluwole O. GREEN, Patrick O. OLABISI, Assessment of Radio-Frequency Radiation Levels from Cellular Base Transceiver Stations in Residential Areas and Their Potential Health Effects on Humans , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Taiwo J. DURODOLA, Suleiman ZUBAIR, James AGAJO, Open Radio Access Network (ORAN) Deployment Strategies for Remote Areas , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Peter EDOKA, Incidents of Flood Disaster in Kaduna: Preventive and Mitigating Measures , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ibrahim BALA, Solomon M. DAUDA, Audu A. BALAMI, Peter A. IDAH, Design Analysis of a Kenaf Decorticating Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Nnamdi S. OKOMBA, Adedayo A. SOBOWALE, Adebimpe O. ESAN, Bolaji A. OMODUNBI, Taiwo A. AWOYEMI, Development of a High Blood Pressure and Hypoxemia Measuring Device , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oluwaseun S. OGUNGBEMI, Aquifer Characterisation and Vulnerability Assessment in a Typical Basement Complex Terrain , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad B. MUHAMMAD, Muhammad Y. ABDULLAHI, Aminu BALA, Optimal Reduction of Technical Power Losses in Radial Distribution Networks Using Differential Evolution for Distributed Generation: A Case Study of the Azare Substation in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Hafsah A. ABDULRAHMAN, Muhammad M. HAMIDU, Techno-Economic Optimization of a Hybrid PV-Wind-Waste-to Energy System for the University of Maiduguri , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. HAMIDU, Mathew KATAMBI, Omar FARUQ, Techno-Economic and Environmental Assessment of a Solar PV-Based Microgrid for Residential Electrification in Gwange I, Maiduguri Using HOMER Pro , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Babagoni A. ADAM, Muhammad B. MAINA, Muhammad SHUWA, Abba B. MUHAMMAD, A Review on Neem Leaves Valorization Through Advanced Briquetting and Carbonization Technologies , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Muhammad M. HAMIDU, Development of MATLAB-Based Model for Solar Radiation Prediction and Photovoltaic Panel Tilt Optimization Angle for Maiduguri Region, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
