Waste Management in Bauchi Metropolis: Solid Measure and Characterization in Municipality
- Authors
-
-
Samaila J. EL-PATEH
Bauchi State Ministry of Water Resources, Bauchi, Bauchi State, Nigeria
Author
-
Ibrahim IDRIS
Kano State Ministry of Water Resources, Kano, Kano State, Nigeria
Author
-
- Keywords:
- Solid waste, waste characterization, waste components, household waste.
- Abstract
-
The research examined waste management in order to prevent diseases in the Bauchi city, Bauchi local government in Bauchi state of Nigeria by technical and scientific approach to utilized generated solid of waste; that is physical composition of refuse dumped out of small, medium enterprises and communities. The study exhausted more than twelve-week when conducting questionnaire, interviews and survey that employed in the collection of the required data. According to National Population Commission (2006) population of Bauchi metropolis and its environs has growth rate of 3.2% annually which identified different percentage embedded to solid waste disposals; composition of dirt, ash and other unidentified objects was 20.2%, paper/cardboard 14.1%, nylon and polythene 16.4%, garden leaves 13.5%, food waste 11.6% while tin cans/metals were 5.1%, textile/fabrics 6.2%, plastic/rubber 6.8% and lastly glass and ceramics waste 6.1%. Over 80% of the waste fraction has the potential for recovery into other products; with this, 42.4% could be recycled and 51.56% suitable for biological conversions such as composting and anaerobic digestion, expected solid waste accumulated in Bauchi capital city daily was 0.30 kg/cap/day, the solid waste management studies may guide stakeholders to pick positive decisions on waste management options.
- References
- Downloads
- Published
- 24-09-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Ojochide P. DAMIAN, Fadimatu N. DABAI, Abdulwasiu ABDURRAHMAN, Kamiludeen OLANREWAJU, Bilyamin ABDULMUMIN, Grace A. OLUGBENGA, A Simulation-Driven Strategy for Improved Expandable Polystyrene Synthesis via Multi-Stage Initiator Dosing , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Jamesmary E. AYANRU, Matthew S. ABOLARIN, Omotayo I. OGUNWEDE, Henry I. MORKAH, Adeshola O. OPENIBO, Development and Performance Evaluation of a Dryer for Preserving Vegetable Leaves , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Danladi K. GARBA, Emmanuel O. AWEDA, Nuhu A. ADEMOH, Fredrick NGOLEMASANGO, Pascal A. UBI, Akor TERNGU, Lawal KABIR, Shuaibu O. YAKUBU, The Effects of Gum Arabic Matrix on the Hardness and Water Absorption of Agro-Based (Banana Pseudostem) Hybrid Composites , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Peter EDOKA, Incidents of Flood Disaster in Kaduna: Preventive and Mitigating Measures , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala I. ABDULKARIM, Yusuf M. BABA, Suleiman I. ENEHE, Kamoru A. SALAM, Umar IDRISS, Synthesis of Activated Carbon from Corncob for the removal of Lead (Pb²⁺) ions from Aqueous solution using a packed bed Adsorption Column , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala I. ABDULKARIM, Phebe O. JAMES, Utilization of Microbial Fuel Cells for Electricity Generation from Gwagwalada Abattoir Wastewater , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mohammed U. GARBA, Usman B. ABDULLAHI, Hayatudden S. BARAYAIS, Aisha B. FARUQ, Suleiman IDRIS, Abubakar M. MUHAMMAD, Abubakar S. MOHAMMED, Treatment of Gold Mining Wastewater: A Review of Current Technologies and Future Perspectives , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
