Waste Management in Bauchi Metropolis: Solid Measure and Characterization in Municipality
- Authors
-
-
Samaila J. EL-PATEH
Bauchi State Ministry of Water Resources, Bauchi, Bauchi State, Nigeria
Author
-
Ibrahim IDRIS
Kano State Ministry of Water Resources, Kano, Kano State, Nigeria
Author
-
- Keywords:
- Solid waste, waste characterization, waste components, household waste.
- Abstract
-
The research examined waste management in order to prevent diseases in the Bauchi city, Bauchi local government in Bauchi state of Nigeria by technical and scientific approach to utilized generated solid of waste; that is physical composition of refuse dumped out of small, medium enterprises and communities. The study exhausted more than twelve-week when conducting questionnaire, interviews and survey that employed in the collection of the required data. According to National Population Commission (2006) population of Bauchi metropolis and its environs has growth rate of 3.2% annually which identified different percentage embedded to solid waste disposals; composition of dirt, ash and other unidentified objects was 20.2%, paper/cardboard 14.1%, nylon and polythene 16.4%, garden leaves 13.5%, food waste 11.6% while tin cans/metals were 5.1%, textile/fabrics 6.2%, plastic/rubber 6.8% and lastly glass and ceramics waste 6.1%. Over 80% of the waste fraction has the potential for recovery into other products; with this, 42.4% could be recycled and 51.56% suitable for biological conversions such as composting and anaerobic digestion, expected solid waste accumulated in Bauchi capital city daily was 0.30 kg/cap/day, the solid waste management studies may guide stakeholders to pick positive decisions on waste management options.
- References
- Downloads
- Published
- 24-09-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Bala I. ABDULKARIM, Umar IDRISS, Synthesis and Characterization of Laggera aurita-Derived KOH Activated Carbon (LAKOHAC) and Role for the Adsorption of Water-Soluble Fraction of Benzene (WSFB) in Oil-Spilled Water , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Yahaya U. JAURO, Danladi D. USMAN, Lawan G. ABUBAKAR, Yusuf G. SHIMBURA, Aminu MOHAMMED, Design and Fabrication of Tapered Screw Briquetting Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ephraim G. KEFAS, Abdulfatai JIMOH, Mohammed A. EVUTI, Abubakar A. IBRAHIM, Abdulwahab GIWA, Adeola G. OLUGBENGA, Luffa Sponge, Banana Stem and Delonix regia Seed Characterization as Potential Biosorbents for Industrial Wastewater Remediation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Hyelni G. MSHELIA, Abdulfatai JIMOH, Mohammed A. EVUTI, Abubakar A. IBRAHIM, Abdulwahab GIWA, Adeola G. OLUGBENGA, Potential of Onion Skin, Luffa cylindrica, and Corn Cob as Cellulose Sources: A Study of Their Proximate, Ultimate, and Morphological Properties , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar S. MOHAMMED, Mohammed ALIYU, Mohammed U. GARBA, Ibrahim S. MOHAMMED, Ibrahim A. KUTI, Meshack S. IMOLOGIE, Umaru MUSA, Olalekan D. ADENIYI, Peter A. ADEOYE, Abubakar G. ISAH, Folarin T. OLORUNMOTITO, Development and Packaging of Eco-friendly Biosolid Briquettes Synthesised with Bagasse for Green Energy Generation and Utilisation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mohammed U. GARBA, Musa A. ABDULLAHI, Isah RABI, Saadatu A. GORO, Habibu UTHMAN, Abubakar S. MOHAMMED, Umaru AHMADU, Usman S. ONODUKU, Recovery of Lithium Carbonate from Nigerian Lepidolite Ore via Roasting-Leaching-Precipitation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala YAHAYA, Mukhtar N. YAHYA, Characterization of Soil Properties Under Continuous Irrigation Practice , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mohammed U. GARBA, Usman B. ABDULLAHI, Hayatudden S. BARAYAIS, Aisha B. FARUQ, Suleiman IDRIS, Abubakar M. MUHAMMAD, Abubakar S. MOHAMMED, Treatment of Gold Mining Wastewater: A Review of Current Technologies and Future Perspectives , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Peter EDOKA, Incidents of Flood Disaster in Kaduna: Preventive and Mitigating Measures , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala I. ABDULKARIM, Phebe O. JAMES, Utilization of Microbial Fuel Cells for Electricity Generation from Gwagwalada Abattoir Wastewater , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
