Utilization of Microbial Fuel Cells for Electricity Generation from Gwagwalada Abattoir Wastewater
- Authors
-
-
Bala I. ABDULKARIM
Department of Chemical Engineering, University of Abuja, Abuja, Nigeria
Author
-
Phebe O. JAMES
Department of Chemical Engineering, University of Abuja, Abuja, Nigeria
Author
-
- Keywords:
- Electricity generation, microbial fuel cells, abattoir wastewater, total dissolved solids, pH.
- Abstract
-
This study explores the use of microbial fuel cells (MFCs) for electricity generation and wastewater treatment using wastewater from the Gwagwalada abattoir. The research aimed to assess contamination levels, develop an MFC system, and evaluate its performance over 240 hours. Key parameters analysed are: Biochemical Oxygen Demand (BOD), Chemical Oxygen Demand (COD), Total Dissolved Solids (TDS), Total Suspended Solids (TSS), conductivity, and pH, before and after treatment. The MFC was constructed based on established designs and its electrical output voltage and current was monitored throughout the experiment. Results showed a significant reduction in BOD and COD by 69.8% and 68.8%, respectively. The MFC also produced a maximum voltage of 94 mV and current of 0.2 mA. These findings demonstrate that MFCs can simultaneously treat abattoir wastewater and generate electricity, suggesting a promising avenue for sustainable waste-to-energy technologies with potential for further enhancement.
- References
- Downloads
- Published
- 01-09-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Sati C. NSHOL, Saeed Y. UMAR, Suleiman A. YERO, Modification of the Engineering Properties of Road Base Course Soil Materials with Cement and Polyethylene Terephthalate (PET) , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Opeyemi A. ASAJU, Cephas ADELORE, Akintunde O. ONAMADE, Jonathan B. ADEWUMI, Glory A. ODUBANJO, Gbenga O. WILLIAMS, Enoch O. OYELEYE, Assessing Thermal Comfort and its Impact on Student Satisfaction in Selected Hostels at Caleb University, Imota, Lagos State , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Jennifer BALA, Sikiru O. SUBAIRU, Noel M. DOGONYARO, Joseph A. OJENIYI, Suleiman AHMAD, Development of an Optimized Hybrid XGBoost–GRU Model for Detection of Ponzi Schemes in Ethereum Transaction Networks , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ibrahim M. GANA, Abdullahi YUSUF, Agidi GBABO, Micheal EPHRAIM, Abubakar M. HASSAN, Development and Testing of an Automated Solar-Powered Nutrient Film Technique (NFT) Hydroponic Planting System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bosede A. ORHEVBA, Sodeeq A. OLAJIDE, Optimization of Alkaline Pretreatment and Fermentation Conditions for Improved Physicochemical Properties and Yield of Bioethanol Produced from Sugarcane Bagasse , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Kamoru O. OLADOSU, Kabiru MUSTAPHA, Ayodeji S. OLAWORE, Akeem B. IBRAHIM, Abdulganiyu ISSA, Development of a Free-Fall Pyrolysis Reactor for Biofuel Production Using Sugarcane Bagasse and Cassava Rhizomes as Feedstocks , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Zainab B. LAPAI, Joseph A. OJENIYI, Ismail IDRIS, Abdulkadir O. ABDULBAKI, Jennifer BALA, Entropy-Guided Neural Architecture for Family-Level Classification of Windows Ransomware , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oluwaseun S. OGUNGBEMI, Geophysical Approach to Groundwater Resource Appraisal in Afe Babalola University, Ado-Ekiti, Southwestern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. HAMIDU, Development of MATLAB-Based Model for Solar Radiation Prediction and Photovoltaic Panel Tilt Optimization Angle for Maiduguri Region, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Zakariah A. ADEJOH, Hawawu SALAMI, Abdullahi M. EVUTI, Yahaya S. MOHAMMAD, Yakubu STEPHEN, Effect of Activation Time on Physicochemical Properties of Activated Carbon Prepared from Coconut Shell , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Bala I. ABDULKARIM, Umar IDRISS, Synthesis and Characterization of Laggera aurita-Derived KOH Activated Carbon (LAKOHAC) and Role for the Adsorption of Water-Soluble Fraction of Benzene (WSFB) in Oil-Spilled Water , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala I. ABDULKARIM, Yusuf M. BABA, Suleiman I. ENEHE, Kamoru A. SALAM, Umar IDRISS, Synthesis of Activated Carbon from Corncob for the removal of Lead (Pb²⁺) ions from Aqueous solution using a packed bed Adsorption Column , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
