Empirical Load Profiling and Categorisation for a Hybrid Renewable Microgrid Serving an Integrated Farm in Nigeria
- Authors
-
-
Vandi JUSU
Author
-
Eugene O. AGBACHI
Author
-
Jibril A. BALA
Author
-
- Keywords:
- Demand-side management, Empirical load profiling, Hybrid renewable energy, Load criticality, Microgrid.
- Abstract
-
Off-grid hybrid renewable microgrids often serve farms that combine livestock and horticulture, yet published sizing studies rarely distinguish loads that cannot be interrupted without harming animals or crops from those that can. This paper presents an empirical load-profiling and criticality-categorisation study of an integrated farm in Minna, Nigeria, comprising a 400-cow dairy unit, a 25,000-bird layer poultry unit, a 10,000-bird broiler poultry unit, and a 5,000 m² greenhouse. Forty appliances, totalling 320.93 kW of installed capacity, were inventoried and disaggregated into hourly dispatch profiles for the Rainy, Harmattan, and Dry seasons. Each appliance was then classified into three biological-criticality tiers, Tier 1 (never shed), Tier 2 (shed only once battery state of charge falls low), and Tier 3 (fully deferrable), following a review process that checked functional consistency against species-specific thermal risk. The tiered profiles were expanded into three parallel, verified annual series covering all 8,760 hours of the year. Statistical analysis showed that the farm-level annual load factor reaches 0.628, giving a peak-to-average ratio of 1.59. Tier 1 alone showed a lower load factor of 0.446 and a higher peak-to-average ratio of 2.24, and was strongly correlated with the dairy milking schedule. The Tier 1 load duration curve remained above 24 kW for 58.1% of the year and never fell below 13.65 kW, a sustained base-load pattern with direct implications for battery-energy and diesel or biogas backup sizing. The novelty of this study lies in combining appliance-level disaggregation, three-season synthesis, and a physiologically justified three-tier criticality classification for a combined livestock-and-horticulture microgrid. The dataset and classification are recommended as a reusable, empirically grounded input for future research on microgrid sizing, reliability assessment, and demand-side management.
- References
- Downloads
- Published
- 17-10-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Vandi JUSU, Eugene O. AGBACHI, Jibril A. BALA (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Martins Y. OTACHE, Iyanda M. ANIMASHAUN, Sadeeq A. MOHAMMED, Emmanuel O. AGBESE, Spatiotemporal Variability and Trend Analysis of Rainfall and Temperature in Northern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Yetunde M. ALADEITAN, Abdulmojeed O. OLUOGUN, Potential of Zinc Oxide Nanoparticles for Remediation of Oil-Contaminated Soil and Water , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Amina N. IBRAHIM, Petrus NZEREM, Mojeed O. OLOGUN, Formulation and Evaluation of Drilling Fluids from Waste Engine Oil and Algae-Based Surfactants , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Yusuf T. BAFFA, Muhammad Y. MUHAMMAD, Aliyu SHUAIBU, Enhanced Detection and Classification Models for Distributed Denial-of-Service Using Time-Based Features in Cybersecurity , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Daniel N. MBACHIRIN, David E. ABEL, Paul A. OMALE, Precision Agriculture Technologies for Smallholder Farming Systems in Developing Countries: A Scoping Review of Opportunities, Limitations and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Vincent B. ONIGBARA, Sunday I. AGU, Muftau A. GBENLE, Metal-Based Biomaterials for Clinical Implant Applications: Materials and Performance – A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Shehu ABDULKADIR, Dangora N. DAUDA, Aliyu A. ADAMU, Badaru M. SANI, Rilwan ABUBAKAR, Timothy A. TIMOTHY, Uchechukwu M. AGBOM, Abubakar S. ABUBAKAR, Development and Performance Evaluation of a Modified Active Evaporative Cooling System for Postharvest Preservation of Selected Vegetables , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Raji ABDULRASAK, Abdulaziz S. ALIYU, Assessment of Occupational Health Hazards Among Oil Refinery Workers at Kaduna Refining and Petrochemical Company , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Temitope E. OLUBODUN, Joshua T. AKINWAMIDE, Olugbenga O. AMU, Characterization of Shear Strength Parameters for Construction Works in Ado-Ekiti Metropolis, Ekiti State, Southwestern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Usman A. ALI, Munir A. ADEWOYE, Adamu U. ABDULLAHI, Determinants of Blockchain Adoption for Academic Certificate Verification: Insights from Verification Officers for Sustainable Education in Nigerian Higher Education Institutions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
