Empirical Load Profiling and Categorisation for a Hybrid Renewable Microgrid Serving an Integrated Farm in Nigeria
- Authors
-
-
Vandi JUSU
Author
-
Eugene O. AGBACHI
Author
-
Jibril A. BALA
Author
-
- Keywords:
- Demand-side management, Empirical load profiling, Hybrid renewable energy, Load criticality, Microgrid.
- Abstract
-
Off-grid hybrid renewable microgrids often serve farms that combine livestock and horticulture, yet published sizing studies rarely distinguish loads that cannot be interrupted without harming animals or crops from those that can. This paper presents an empirical load-profiling and criticality-categorisation study of an integrated farm in Minna, Nigeria, comprising a 400-cow dairy unit, a 25,000-bird layer poultry unit, a 10,000-bird broiler poultry unit, and a 5,000 m² greenhouse. Forty appliances, totalling 320.93 kW of installed capacity, were inventoried and disaggregated into hourly dispatch profiles for the Rainy, Harmattan, and Dry seasons. Each appliance was then classified into three biological-criticality tiers, Tier 1 (never shed), Tier 2 (shed only once battery state of charge falls low), and Tier 3 (fully deferrable), following a review process that checked functional consistency against species-specific thermal risk. The tiered profiles were expanded into three parallel, verified annual series covering all 8,760 hours of the year. Statistical analysis showed that the farm-level annual load factor reaches 0.628, giving a peak-to-average ratio of 1.59. Tier 1 alone showed a lower load factor of 0.446 and a higher peak-to-average ratio of 2.24, and was strongly correlated with the dairy milking schedule. The Tier 1 load duration curve remained above 24 kW for 58.1% of the year and never fell below 13.65 kW, a sustained base-load pattern with direct implications for battery-energy and diesel or biogas backup sizing. The novelty of this study lies in combining appliance-level disaggregation, three-season synthesis, and a physiologically justified three-tier criticality classification for a combined livestock-and-horticulture microgrid. The dataset and classification are recommended as a reusable, empirically grounded input for future research on microgrid sizing, reliability assessment, and demand-side management.
- References
- Downloads
- Published
- 17-10-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Vandi JUSU, Eugene O. AGBACHI, Jibril A. BALA (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Peter EDOKA, Assessment of the Role of Kogi State Government in Flood Mitigation in Lokoja, Kogi State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Emma S. EKPO, Mokọ́ládé JOHNSON, Constructing Meaning and Enhancing Well-Being: The Role of Place Attachment, Place Identity, and Sense of Place in Architectural Studio Environments , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Opeyemi O. ASAOLU, Oluwasanmi S. ADANIGBO, Temidayo J. AKINDAHUNSI, Advances in Privacy Preservation Techniques for Mobile Ad Hoc Networks: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Olarewaju T. OGINNI, An Overview of Unmanned Aerial Vehicles Technologies for Office Use and Services Delivery , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Samuel O. OLADIPUPO, Dominic S. NYITAMEN, Lanre S. MOJEREOLA, Design, Simulation and Fabrication of a Slot Loaded 2.45 GHz Microstrip Patch Antenna for ISM Band Wireless Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mohammed U. GARBA, Usman B. ABDULLAHI, Hayatudden S. BARAYAIS, Aisha B. FARUQ, Suleiman IDRIS, Abubakar M. MUHAMMAD, Abubakar S. MOHAMMED, Treatment of Gold Mining Wastewater: A Review of Current Technologies and Future Perspectives , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Jamesmary E. AYANRU, Matthew S. ABOLARIN, Omotayo I. OGUNWEDE, Henry I. MORKAH, Adeshola O. OPENIBO, Development and Performance Evaluation of a Dryer for Preserving Vegetable Leaves , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Afeez A. AWOLOKUN, Olusegun O. ALUKO, Temitope F. AWOLUSI, Mayowa A. OGIDI, Performance Evaluation of Pervious Concrete Containing Glass Cullet and Glass Powder for Sustainable Construction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- James AUDU, Abdulraman A. SALAWU, Muriana R. AREMU, Abdullahi A. ALHAJI, Lawal S. SIUS, Characterisation of Pumice-Kaolin Refractory Bricks for High Temperature Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abubakar L. IBRAHEEM, John K. ALHASSAN, Noel D. MOSES, Suleiman AHMAD, Development of Ensemble SVM–LSTM Model for Phishing Website Detection , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
