Determination of the Physicochemical Composition of Processed Powdered Pepper (Capsicum spp.) Sold in Selected Markets in Makurdi, Benue State, Nigeria
- Authors
-
-
Paul A. OMALE
Author
-
Hammed O. SALAUDEEN
Author
-
Sunday S. IGILA
Author
-
Enoch T. CHIN
Department of Agricultural and Biosystems Engineering, Joseph Sarwuan Tarka University Makurdi, Benue State, Nigeria
Author
-
- Keywords:
- Capsicum spp.; powdered pepper; Fourier Transform Infrared Spectroscopy; physicochemical characterization; food quality; post-harvest processing.
- Abstract
-
The physicochemical quality of processed powdered pepper influences its nutritional value, shelf stability, safety, and consumer acceptability. However, information on the molecular characteristics of commercially processed powdered pepper sold in Nigerian markets remains limited. This study characterized processed powdered pepper (Capsicum spp.) obtained from three major markets in Makurdi, Benue State, Nigeria. Wurukum, Modern, and North Bank markets using a laboratory-prepared sample as a control. Fourier Transform Infrared Spectroscopy (FTIR) was employed to identify major functional groups within the spectral range of 4000–400 cm⁻¹. Characteristic absorption bands associated with hydroxyl groups, proteins, lipids, phenolic compounds, and pigment-related conjugated structures were detected in all samples. Protein-associated Amide I and Amide II bands occurred at approximately 1637 and 1542 cm⁻¹, while lipid-related absorption bands were observed between approximately 3011 and 1745 cm⁻¹. Variations in peak positions and spectral intensities among samples indicated differences in moisture-associated, protein-associated, and pigment-related spectral responses, which may reflect differences in processing and storage conditions. Statistical analysis showed significant differences (p < 0.05) in moisture-, protein-, and pigment-related spectral responses, whereas lipid- and phenolic-related responses did not differ significantly among the samples. The North Bank sample exhibited relatively stronger pigment- and phenolic-associated spectral features, while the control and Modern Market samples showed comparatively stronger moisture- and protein-related features. The results demonstrate the influence of commercial processing and post-harvest handling on the molecular characteristics of powdered pepper and highlight the potential of FTIR spectroscopy as a rapid, non-destructive tool for comparative quality assessment of processed spices.
- References
- Downloads
- Published
- 07-09-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Paul A. OMALE, Hammed O. SALAUDEEN, Sunday S. IGILA, Enoch T. CHIN (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Isaac O. OLAOYE, Design Modification and Performance Evaluation of an Existing Cashew Nut Shell Liquid (CNSL) Extraction Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Samaila J. EL-PATEH, Ibrahim IDRIS, Waste Management in Bauchi Metropolis: Solid Measure and Characterization in Municipality , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ameh RICHARD, Sani B. MUHAMMAD, Terver AUSE, Umar SHEHU, Assessment of the Suitability of Wusasa Clay for Refractory Bricks Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Tahiru MOHAMMED, Muhammad B. MAINA, Abba B. MUHAMMAD, Muhammad SHUWA, From Local Sand to Functional Silicon: An Integrated Pathway for Producing Photovoltaic-Grade Material from Nigerian Silica Sand , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Jide E. T. AKINSOLA, John A. OLADITI, Ifeoluwa M. OLANIYI, Emmanuel A. OLAJUBU, Ayomide O. EMMANUEL, Ganiyu A. ADEROUNMU, Artificial Intelligence-Enabled Essay Grading System Using NLP Via Semantic Similarity Analysis and Supervised Machine Learning Techniques , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Ibrahim BALA, Solomon M. DAUDA, Audu A. BALAMI, Peter A. IDAH, Design Analysis of a Kenaf Decorticating Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Babagoni A. ADAM, Muhammad B. MAINA, Muhammad SHUWA, Abba B. MUHAMMAD, A Review on Neem Leaves Valorization Through Advanced Briquetting and Carbonization Technologies , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ahmad IDRIS, Evaluation of Challawa Tannery Wastewater as Mixing and Curing Water for Concrete Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Musibaudeen O. IDRIS, Busayo S. ADEBOYE, Rasheedah A. AYOOLA, Abiodun G. ABIOYE, Abideen T. OYEWO, An Artificial Neural Network-Based Quality Control Framework for Nigerian Manufacturing Industries , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Isiaq O. ALABI, Hassan T. ABDULAZEEZ, Sulaiman AHMAD, Yahaya M. SANI, Scalability Versus Accuracy Trade-offs in Distributed Big Data Processing Frameworks: A Comparative Evaluation of Apache Spark, Flink, and Dask Using Benchmark Datasets , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Daniel N. MBACHIRIN, David E. ABEL, Paul A. OMALE, Precision Agriculture Technologies for Smallholder Farming Systems in Developing Countries: A Scoping Review of Opportunities, Limitations and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
