Application of Integrated Solar-Powered Ultraviolet Radiation and Sand Biofiltration Techniques in Rural Water Treatment: A Review
- Authors
-
-
Sindrella AWINO
Author
-
Peter ADEOYE
Author
-
- Keywords:
- Biofiltration; poultry and abattoir effluent; rural water treatment; solar power; UV-C disinfection; waterborne diseases.
- Abstract
-
Access to clean water is still an issue all over the world, and in the context of rural and peri-urban areas of sub-Saharan Africa, it is a matter of grave concern due to widespread contamination of shallow wells and surface water resources by sewage from abattoirs and poultry farms. Commonly available technological solutions for rural water treatment are often very costly, energy-intensive, and technically demanding. This paper reviews the prospects of using sand-based biofiltration (bio-sand filtration) in combination with solar ultraviolet-C (UV-C) disinfection as a multi-barrier engineering solution to access safe water in rural Africa. The basics of sand-based biofiltration, including principles of schmutzdecke formation, pathogen removal kinetics, and hydraulic design are covered together with the basics of photochemical action of UV-C radiation, its dosimetry and limitations due to turbidity. The current state of development of engineering designs was reviewed, particularly the Centre for Affordable Water and Sanitation Technology (CAWST) Version 10 bio sand filter, biologically active carbon media in filters, and sizing solar photovoltaic (PV) power systems to operate UV lamps. Pilot field tests have demonstrated that the technology allows achieving more than 99.99% removal efficiency of bacteria, reduction of turbidity down to 1 NTU, and 40 mJ/cm² irradiance using a 10-16 W lamp and a 100 W PV module. Problems and perspectives of the application of the technology in Uganda with respect to water scarcity, industrial pollution, availability of solar radiation, and appropriate-technology infrastructure are discussed. This paper discusses the potential of Bio-sand filtration (BSF) with solar UV-C disinfection in terms of advancement of Sustainable Development Goal (SDG) 6 in rural Uganda.
- References
- Downloads
- Published
- 14-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Sindrella AWINO, Peter ADEOYE (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Ferguson H. TOBINS, Ishiaka S. ARUDI, Abdulhakeem H. NURUDEEN, Snail Shell-Clay Ceramic Composites as Sustainable Raw Materials for High-Voltage Insulators , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Danasabe GAMBO, Isyaku YA’U, Tisan A. GREGORY, Development of Free Space Optical Communication Testbed for Fog and Rain Attenuations Measurement , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mela I. L. LASHIRU, Ganiyu A. BAKARE, Sabo M. HASSAN, Kamilu O. LAWAL, Data-Driven Observability Enhancement in Active Distribution Networks via Optimal Co-Deployment of DGs and D-PMUs Using Hybrid APSO-ASDA , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adegboyega L. ALUKO, Ayodeji T. BALOGUN, Environmental Impact of Gold Mining Activities and Sustainable Mitigation Approaches: Case Study of Ilesa Surrounding areas, Osun State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Aminu BALA, Nasiru B. KADANDANI, Isiyaku ABUBAKAR, Performance Evaluation of Fuzzy Logic and Fractional Order PI Controllers for Electric Vehicle Wireless Charging System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala YAHAYA, Mukhtar N. YAHYA, Characterization of Soil Properties Under Continuous Irrigation Practice , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Yetunde M. ALADEITAN, Damilola V. ABRAHAM, Abdulmojeed O. OLUOGUN, Abdulwasiu ABDURRAHMAN, A Critical Review of Surrogate Reservoir Modelling for Uncertainty Quantification in Thin Oil Rim Reservoirs , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Bala ABDULLAHI, Bala G. ABDURRAHMAN, Yusuf ALHASAN, Saidu B. ABUBAKAR, Bashir I. KUNYA, Raya K. ALDADAH, Saad MAHMOUD, Ahmed REZK, Effects of Truncating the Height of Compound Parabolic Collector on its Geometry, Optical and Thermal Performances , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Jamesmary E. AYANRU, Matthew S. ABOLARIN, Omotayo I. OGUNWEDE, Henry I. MORKAH, Adeshola O. OPENIBO, Development and Performance Evaluation of a Dryer for Preserving Vegetable Leaves , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Martins Y. OTACHE, Iyanda M. ANIMASHAUN, Sadeeq A. MOHAMMED, Emmanuel O. AGBESE, Spatiotemporal Variability and Trend Analysis of Rainfall and Temperature in Northern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
You may also start an advanced similarity search for this article.
