Application of Integrated Solar-Powered Ultraviolet Radiation and Sand Biofiltration Techniques in Rural Water Treatment: A Review
- Authors
-
-
Sindrella AWINO
Author
-
Peter ADEOYE
Author
-
- Keywords:
- Biofiltration; poultry and abattoir effluent; rural water treatment; solar power; UV-C disinfection; waterborne diseases.
- Abstract
-
Access to clean water is still an issue all over the world, and in the context of rural and peri-urban areas of sub-Saharan Africa, it is a matter of grave concern due to widespread contamination of shallow wells and surface water resources by sewage from abattoirs and poultry farms. Commonly available technological solutions for rural water treatment are often very costly, energy-intensive, and technically demanding. This paper reviews the prospects of using sand-based biofiltration (bio-sand filtration) in combination with solar ultraviolet-C (UV-C) disinfection as a multi-barrier engineering solution to access safe water in rural Africa. The basics of sand-based biofiltration, including principles of schmutzdecke formation, pathogen removal kinetics, and hydraulic design are covered together with the basics of photochemical action of UV-C radiation, its dosimetry and limitations due to turbidity. The current state of development of engineering designs was reviewed, particularly the Centre for Affordable Water and Sanitation Technology (CAWST) Version 10 bio sand filter, biologically active carbon media in filters, and sizing solar photovoltaic (PV) power systems to operate UV lamps. Pilot field tests have demonstrated that the technology allows achieving more than 99.99% removal efficiency of bacteria, reduction of turbidity down to 1 NTU, and 40 mJ/cm² irradiance using a 10-16 W lamp and a 100 W PV module. Problems and perspectives of the application of the technology in Uganda with respect to water scarcity, industrial pollution, availability of solar radiation, and appropriate-technology infrastructure are discussed. This paper discusses the potential of Bio-sand filtration (BSF) with solar UV-C disinfection in terms of advancement of Sustainable Development Goal (SDG) 6 in rural Uganda.
- References
- Downloads
- Published
- 14-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Sindrella AWINO, Peter ADEOYE (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Abdullahi P. NUHU, Kabir O. YUSUF, Aliyu O. ABDULRAHMAN, Kehinde A. LASISI, Effect of Heat Treatment on Post Weld Railway Track , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Abdultoyyib A. ALABI, Adamu S. ABUBAKAR, Patrick U. OKORIE, Abdulwahab IBRAHIM, Development of a Non-Convex Economic Load Dispatch Across Small to Very Large-Scale Power Systems Using Improved Sine Cosine Algorithm , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Joseph O. AJAYI, Adekunle T. ADENIYI, Mufliah G. OMOFOYEWA, Abel A. ADEYI, Abdulwahab GIWA, Evaluation on the Rheological Properties of Water-Based Drilling Mud: A Case Study of Ire-Ekiti Clay , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Michael R. ADU, Blessing O. UMUKORO, Design and Construction of a 1.5 kVA Pure Sine Wave Inverter for Office Use , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ezekiel O. DARAMOLA, Omolola A. OGBOLUMANI, Artificial Intelligence-Powered Optimisation of Food-Energy-Water Resource Allocation in Nigerian Internally Displaced Persons' Camps , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Oguntola J. ALAMU, Peter O. ILORI, Seun OYELAMI, Wasiu O. ADEDEJI, Tunji J. ADEPOJU, Abideen T. OYEWO, A Review of the Effect of Post-Processing Heat Treatment on 3D Printed Metal Parts , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Raphina O. UBAH, Oluwaseun S. OGUNGBEMI, Olabode O. OLUTOMILOLA, Impact of Open Dumpsites on Groundwater Quality: Geophysical and Hydrochemical Evidence from Ijan-Ekiti, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Muazu D. ZAKARI, Md R. KAMAL, Wada I. MUHAMMAD, Nuraddeen M. NASIDI, Dahiru MOHAMMED, Agro-Hydrological Modelling Systems in Peninsula Malaysia: A Comprehensive Review and a Guide towards Model Development , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Damilare L. ADEKEYE, Uche M. IROKA, A Microcontroller-Based Intelligent Electricity Theft Detection and Prevention System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Danladi K. GARBA, Emmanuel O. AWEDA, Nuhu A. ADEMOH, Fredrick NGOLEMASANGO, Pascal A. UBI, Akor TERNGU, Lawal KABIR, Shuaibu O. YAKUBU, The Effects of Gum Arabic Matrix on the Hardness and Water Absorption of Agro-Based (Banana Pseudostem) Hybrid Composites , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
