Application of Integrated Solar-Powered Ultraviolet Radiation and Sand Biofiltration Techniques in Rural Water Treatment: A Review
- Authors
-
-
Sindrella AWINO
Author
-
Peter ADEOYE
Author
-
- Keywords:
- Biofiltration; poultry and abattoir effluent; rural water treatment; solar power; UV-C disinfection; waterborne diseases.
- Abstract
-
Access to clean water is still an issue all over the world, and in the context of rural and peri-urban areas of sub-Saharan Africa, it is a matter of grave concern due to widespread contamination of shallow wells and surface water resources by sewage from abattoirs and poultry farms. Commonly available technological solutions for rural water treatment are often very costly, energy-intensive, and technically demanding. This paper reviews the prospects of using sand-based biofiltration (bio-sand filtration) in combination with solar ultraviolet-C (UV-C) disinfection as a multi-barrier engineering solution to access safe water in rural Africa. The basics of sand-based biofiltration, including principles of schmutzdecke formation, pathogen removal kinetics, and hydraulic design are covered together with the basics of photochemical action of UV-C radiation, its dosimetry and limitations due to turbidity. The current state of development of engineering designs was reviewed, particularly the Centre for Affordable Water and Sanitation Technology (CAWST) Version 10 bio sand filter, biologically active carbon media in filters, and sizing solar photovoltaic (PV) power systems to operate UV lamps. Pilot field tests have demonstrated that the technology allows achieving more than 99.99% removal efficiency of bacteria, reduction of turbidity down to 1 NTU, and 40 mJ/cm² irradiance using a 10-16 W lamp and a 100 W PV module. Problems and perspectives of the application of the technology in Uganda with respect to water scarcity, industrial pollution, availability of solar radiation, and appropriate-technology infrastructure are discussed. This paper discusses the potential of Bio-sand filtration (BSF) with solar UV-C disinfection in terms of advancement of Sustainable Development Goal (SDG) 6 in rural Uganda.
- References
- Downloads
- Published
- 14-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Sindrella AWINO, Peter ADEOYE (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Muhammad B. MUHAMMAD, Muhammad Y. ABDULLAHI, Aminu BALA, Optimal Reduction of Technical Power Losses in Radial Distribution Networks Using Differential Evolution for Distributed Generation: A Case Study of the Azare Substation in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ahmad IDRIS, Evaluation of Challawa Tannery Wastewater as Mixing and Curing Water for Concrete Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Abdullahi P. NUHU, Kabir O. YUSUF, Aliyu O. ABDULRAHMAN, Kehinde A. LASISI, Effect of Heat Treatment on Post Weld Railway Track , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Michael R. ADU, Blessing O. UMUKORO, Design and Construction of a 1.5 kVA Pure Sine Wave Inverter for Office Use , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Muazu D. ZAKARI, Md R. KAMAL, Wada I. MUHAMMAD, Nuraddeen M. NASIDI, Dahiru MOHAMMED, Agro-Hydrological Modelling Systems in Peninsula Malaysia: A Comprehensive Review and a Guide towards Model Development , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Raphina O. UBAH, Oluwaseun S. OGUNGBEMI, Olabode O. OLUTOMILOLA, Impact of Open Dumpsites on Groundwater Quality: Geophysical and Hydrochemical Evidence from Ijan-Ekiti, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Joseph O. AJAYI, Adekunle T. ADENIYI, Mufliah G. OMOFOYEWA, Abel A. ADEYI, Abdulwahab GIWA, Evaluation on the Rheological Properties of Water-Based Drilling Mud: A Case Study of Ire-Ekiti Clay , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Christopher C. NWAOGU, Nnamdi AHUCHAOGU, Reducing Electromagnetic Radiation Around the Fourth Generation Base Stations , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mutiat S. YISA, Cross-Regional Energy Strategies: Evaluating Japan’s Power Blueprint for Nigeria’s Needs , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Olusiji A. ADEYANJU, Joseph O. OLAIDE, Machine Learning Models for Predicting Flow Rate for Niger Delta Oil Wells , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
