Production of Silica from ABU Zaria Dam Sand as an Eco-Friendly Corrosion Inhibitor Using Nanotechnology
- Authors
-
-
Abdulkareem BELLO
Author
-
Yusuf O. ADEIZA
Author
-
Saleh S. LUKMAN
Author
-
Muhammad A. ADAMU
Author
-
Chibuzor A. OKAFOR
Author
-
Abdulaziz A. ABDULSALAM
Author
-
- Keywords:
- Sand, Silica nanoparticles, Eco-friendly, Corrosion inhibitor, Adsorption potential.
- Abstract
-
This research is centered on the production and characterization of silica synthesized from sand collected from the ABU Zaria Dam, assessing its suitability as an eco-friendly corrosion inhibitor, using nanotechnology principles. The sand samples available in abundance were collected, processed and analyzed using Scanning Electron Microscopy (SEM) which revealed irregularly shaped grains surrounded by fine agglomerated particles. EDS (Energy-Dispersive X-ray Spectroscopy) was used to confirmed silica as the dominant constituent, with silicon accounting for 53.52 wt%. Silica nanoparticles were synthesized using a modified sol–gel technique involving alkaline extraction, gel precipitation, washing, and calcinations to produce purified nanoscale silica particles. Fourier Transform Infrared Spectroscopy (FTIR) analysis showed characteristic Si–O asymmetric and symmetric stretching vibrations, alongside O–H and C=O functional groups, indicating the presence of silicate structures and surface hydroxyl species. X-Ray Diffraction (XRD) results showed sharp crystalline quartz peaks together with a broad hump between 20–35°, confirming the coexistence of both crystalline and amorphous silica. The average crystallite size calculated using the Scherrer equation was 20.15 ± 3.96 nm, confirming the nanoscale nature of the prepared silica. The combination of nanosized particles, functional groups with high adsorption potential, and significant silica purity suggests that silica sourced from the ABU Zaria dam has strong potential as a sustainable and environmentally friendly corrosion inhibitor which makes it a viable alternative to conventional toxic corrosion-inhibiting chemicals used in industrial systems. Moreover, the adaption of this material as a corrosion inhibitor will definitely increase the National Gross Domestic Product (GDP and comply with the Federal Government 9th millennium development goals, scalable and affordable to the common citizens.
- References
- Downloads
- Published
- 30-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Gbenga G. OSEKE, Chisom S. AMADI, Abubakar U. RAJI, Hydrogen Production from Flare Gas via Steam Methane Reforming: A Simulation-Based Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Onyeka E. NNANYELUGO, Peter O. OFFOR, Cyril OCHERI, Camillus S. OBAYI, Optical and Structural Properties of Er/Sr Co-Doped αMnS Films Prepared by Chemical Spray Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Zaharaddeen MUSA, Aliyu BELLO, Haris A. DANLADI, Design and Construction of Dual Input Mobile Solar Generator for Reliable Off-Grid Power , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, The Impact of Industry 4.0 on New Product Development in Small and Medium Enterprises: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adebola S. AKOLADE, Precious A. OLAOMOTITO, Abibat Y. ADEBIYI, Oluwatunmise P. ABOLARIN, Opeyemi I. ADETUNJI, Kola OGEDENGBE, Production and Evaluation of Cement-Bonded Composites Board Made from Banana Pseudo Stem , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Aminu D. MAHMUD, Imran N. IBRAHIM, Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ameh RICHARD, Sani B. MUHAMMAD, Terver AUSE, Umar SHEHU, Assessment of the Suitability of Wusasa Clay for Refractory Bricks Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Vincent B. ONIGBARA, Muftau A. GBENLE, Sunday I. AGU, Mechanical and Biological Performance of Titanium Hydroxyapatite Composites for Biomedical Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abdullahi YAHAYA, Ahmad ADO, Jaju A. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF, Kinetic Modelling of Sonocatalytic Phenol Degradation over Alumina-Supported Copper Oxide Catalyst , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Daniel N. MBACHIRIN, David E. ABEL, Paul A. OMALE, Precision Agriculture Technologies for Smallholder Farming Systems in Developing Countries: A Scoping Review of Opportunities, Limitations and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Abdulkareem BELLO, Saleh S. LUKMAN, Tasie M. CHIZE, Yusuf O. ADEIZA, Chibuzor A. OKAFOR, Abdullahi O. YAKUBU, Design, Simulation, and 3D Printing of a Lightweight Drone Frame for Farm Monitoring , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
