Production of Silica from ABU Zaria Dam Sand as an Eco-Friendly Corrosion Inhibitor Using Nanotechnology
- Authors
-
-
Abdulkareem BELLO
Author
-
Yusuf O. ADEIZA
Author
-
Saleh S. LUKMAN
Author
-
Muhammad A. ADAMU
Author
-
Chibuzor A. OKAFOR
Author
-
Abdulaziz A. ABDULSALAM
Author
-
- Keywords:
- Sand, Silica nanoparticles, Eco-friendly, Corrosion inhibitor, Adsorption potential.
- Abstract
-
This research is centered on the production and characterization of silica synthesized from sand collected from the ABU Zaria Dam, assessing its suitability as an eco-friendly corrosion inhibitor, using nanotechnology principles. The sand samples available in abundance were collected, processed and analyzed using Scanning Electron Microscopy (SEM) which revealed irregularly shaped grains surrounded by fine agglomerated particles. EDS (Energy-Dispersive X-ray Spectroscopy) was used to confirmed silica as the dominant constituent, with silicon accounting for 53.52 wt%. Silica nanoparticles were synthesized using a modified sol–gel technique involving alkaline extraction, gel precipitation, washing, and calcinations to produce purified nanoscale silica particles. Fourier Transform Infrared Spectroscopy (FTIR) analysis showed characteristic Si–O asymmetric and symmetric stretching vibrations, alongside O–H and C=O functional groups, indicating the presence of silicate structures and surface hydroxyl species. X-Ray Diffraction (XRD) results showed sharp crystalline quartz peaks together with a broad hump between 20–35°, confirming the coexistence of both crystalline and amorphous silica. The average crystallite size calculated using the Scherrer equation was 20.15 ± 3.96 nm, confirming the nanoscale nature of the prepared silica. The combination of nanosized particles, functional groups with high adsorption potential, and significant silica purity suggests that silica sourced from the ABU Zaria dam has strong potential as a sustainable and environmentally friendly corrosion inhibitor which makes it a viable alternative to conventional toxic corrosion-inhibiting chemicals used in industrial systems. Moreover, the adaption of this material as a corrosion inhibitor will definitely increase the National Gross Domestic Product (GDP and comply with the Federal Government 9th millennium development goals, scalable and affordable to the common citizens.
- References
- Downloads
- Published
- 30-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Ferguson H. TOBINS, Ishiaka S. ARUDI, Abdulhakeem H. NURUDEEN, Snail Shell-Clay Ceramic Composites as Sustainable Raw Materials for High-Voltage Insulators , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Bala I. ABDULKARIM, Phebe O. JAMES, Utilization of Microbial Fuel Cells for Electricity Generation from Gwagwalada Abattoir Wastewater , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Benedict O. EDENSETING, Innocent O. OBOH, Alexander A. JOCK, Effective Food Waste Utilization: A Veritable Source of Biofuel for Nigerian Economic Sustenance and Development - A Review , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Ukange N. SYBIL, Hadiza A. UMAR, Ogar M. OKO, Habeebah A. KAKUDI, Usman MAHMUD, Alex AARON, Leveraging Quantum Machine Learning for Early Ovarian Cancer Diagnosis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Jafaru A. MOHAMMED, Thomas N. GUMA, Malachy SUMAILA, Mahdi MAKWAYO, A Review of Local Manufacturing of Borehole Windmill Gear Trains Using Reverse Engineering and Integrated Braking Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Paul A. OMALE, Hammed O. SALAUDEEN, Sunday S. IGILA, Enoch T. CHIN, Determination of the Physicochemical Composition of Processed Powdered Pepper (Capsicum spp.) Sold in Selected Markets in Makurdi, Benue State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Oluwadare J. AKINDUGBAGBE, Adefope OWOJORI, Emmanuel AGBENYI, Babatunde ADEBO, Gamma Shielding Capabilities of Some Selected Materials Within Ibadan Metropolis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. HAMIDU, Mathew KATAMBI, Omar FARUQ, Techno-Economic and Environmental Assessment of a Solar PV-Based Microgrid for Residential Electrification in Gwange I, Maiduguri Using HOMER Pro , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar LAWAL, Abdulkadir O. ABDULBAKI, Nathaniel SALAWU, Bala A. SALIHU, Mamman A. THOMAS, Abraham U. USMAN, Sub-6 GHz Millimeter-Wave Metamaterial Antenna with Reconfigurable Radiation Patterns for Enhanced Wireless Communication , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Murtala ISMAIL, Mohammed S. ISMAIL, Eli A. JIYA, Machine Learning-Driven Recruitment Recommendation System for Employment in Nigerian Universities , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Abdulkareem BELLO, Saleh S. LUKMAN, Tasie M. CHIZE, Yusuf O. ADEIZA, Chibuzor A. OKAFOR, Abdullahi O. YAKUBU, Design, Simulation, and 3D Printing of a Lightweight Drone Frame for Farm Monitoring , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
