Data-Driven Observability Enhancement in Active Distribution Networks via Optimal Co-Deployment of DGs and D-PMUs Using Hybrid APSO-ASDA
- Authors
-
-
Mela I. L. LASHIRU
Author
-
Ganiyu A. BAKARE
Author
-
Sabo M. HASSAN
Author
-
Kamilu O. LAWAL
Author
-
- Keywords:
- Active Distribution Network, D-PMU, Observability, Data-Driven Control, APSO, ASDA, Distribution System State Estimation, Rate-of-Change of Frequency ROCOF.
- Abstract
-
The increasing deployment of renewable Distributed Generators (DGs) introduces operational uncertainty and observability challenges in Active Distribution Networks (ADNs). Traditional Supervisory Control and Data Acquisition (SCADA) systems lack the temporal resolution required for real-time monitoring. This paper proposes a data-driven framework for enhancing network observability through optimal co-deployment of DGs and Distribution Phasor Measurement Units (D-PMUs) using a hybrid Accelerated Particle Swarm Optimization-Adaptive Spiral Dynamic Algorithm (APSO-ASDA). The objective is to maximize network observability with minimal measurement redundancy for improved Distribution System State Estimation (DSSE). Simulation results on the IEEE 13-bus ADN, modeled in MATLAB Simulink R2023b, showed ASDA optimal DG -D-PMU placement at buses 1, 4, with corresponding sizes of 340Kw(solar), and 445kW(wind) with D-PMU at 6, 7, 10, and 12. APSO DG placement is at bus 3 and 4 with a size of 60kW(solar), 400kW(wind), D-PMU at buses 6, 8, 9. The hybrid approach places DG at buses 1 and 3 with corresponding capacities of 110kW (solar) and 250kW (wind), and D-PMU allocation at buses 4, 6, 7, 8, 11 and 12. The hybrid algorithm achieved a rapid reduction in the cost function from 278.7 to 81.14 within the first 36 iterations, highlighting its effectiveness for real-time, data-driven applications.
- References
- Downloads
- Published
- 23-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Martins Y. OTACHE, Iyanda M. ANIMASHAUN, Sadeeq A. MOHAMMED, Emmanuel O. AGBESE, Spatiotemporal Variability and Trend Analysis of Rainfall and Temperature in Northern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN, BAT-Optimized PID and ANFIS Torque-Based MPPT for a 0.5 MW PMSG-Based Wind Energy Conversion System Under Dynamic Wind Conditions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Shehu ABDULKADIR, Dangora N. DAUDA, Aliyu A. ADAMU, Badaru M. SANI, Rilwan ABUBAKAR, Timothy A. TIMOTHY, Uchechukwu M. AGBOM, Abubakar S. ABUBAKAR, Development and Performance Evaluation of a Modified Active Evaporative Cooling System for Postharvest Preservation of Selected Vegetables , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Paramdi S. ABARI, Abdulwahab O. AUDU, Ahmad-Tijani USMAN, Charity T. METIBOBA, Peter O. ANIKOH, Performance Evaluation and Design Analysis of Hybrid Constructed Wetlands for Aquaculture Effluent Treatment under Tropical Conditions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ojochide P. DAMIAN, Fadimatu N. DABAI, Abdulwasiu ABDURRAHMAN, Kamiludeen OLANREWAJU, Bilyamin ABDULMUMIN, Grace A. OLUGBENGA, A Simulation-Driven Strategy for Improved Expandable Polystyrene Synthesis via Multi-Stage Initiator Dosing , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Olarewaju T. OGINNI, An Overview of Unmanned Aerial Vehicles Technologies for Office Use and Services Delivery , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Usman A. ALI, Munir A. ADEWOYE, Adamu U. ABDULLAHI, Determinants of Blockchain Adoption for Academic Certificate Verification: Insights from Verification Officers for Sustainable Education in Nigerian Higher Education Institutions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Lawal B. IDRIS, A Review on Vehicular Ad Hoc Network (VANET) Security challenges and Solutions , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ibrahim BALA, Solomon M. DAUDA, Audu A. BALAMI, Peter A. IDAH, Design Analysis of a Kenaf Decorticating Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN, Software-in-the-Loop Validation of an Adaptive Particle Swarm Optimization-Based MPPT Controller for Real-Time Photovoltaic System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN, BAT-Optimized PID and ANFIS Torque-Based MPPT for a 0.5 MW PMSG-Based Wind Energy Conversion System Under Dynamic Wind Conditions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
