Assessment of the Impact of Tractor Noise Exposure on Operators and Bystanders
- Authors
-
-
Beabu B. DUMKHANA
Author
-
Dandison M. WALI
Author
-
- Keywords:
- Agricultural machinery, noise exposure, setback distance, hearing impairment.
- Abstract
-
Rising noise levels from agricultural machinery contributed to environmental and occupational health issues, adversely affecting machine operators. This study investigated the impact of noise on operators and bystanders during tillage operations. A field experiment covering 1.10703 acres of land was divided into three blocks, each with 9 subplots measuring 160 × 38 m, for a total of 27 treatments in a randomized complete block design (RCBD). The generated noise data were used to create noise distribution trends for different tractor speeds during ploughing, harrowing, and ridging operations. The findings showed that increasing tractor speed from 5 to 9 km/h raised noise levels from 54 to 83.3 dB, affecting individual performance and productivity. As recommended by NESREA in 2007, harrowing met the noise level of 70 dB, while ploughing and ridging were 83.3 dB. Regression analysis revealed strong correlations (r² = 0.8073–0.995) between setback distance and noise reduction. This study has shown that tractor operators may experience temporary hearing loss when leaving the work environment in addition to cognitive fatigue.
- References
- Downloads
- Published
- 15-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Munir A. ADEWOYE, Ahmed ALIYU, Usman A. ALI, Abdulrasheed JIMOH, Blockchain-Based Food Supply Chain Traceability: A Systematic Review of Privacy Preserving and Scalability , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Iyanda M. ANIMASHAUN, Abubakar S. MOHAMMED, Ibrahim A. KUTI, Peter A. OBASA, Rashidat ANIYIKAYE, Yahaya MOHAMMED, Yusuf M. OTACHE, Artificial Intelligence of Things (AIoT) for Precision Irrigation: A Comprehensive Review of Applications, Challenges, and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Nafisa A. ABDULHAMID, Danladi D. USMAN, Kabiru I. JAHUN, Rotkangmwa J. SATI, Yahaya U. JAURO, Abdulmajid M. HASHIR, Yusuf G. SHIMBURA, Development of a Solar Dryer with Multi-Products and a Residual Moisture Control System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Bala YAHAYA, Mukhtar N. YAHYA, Characterization of Soil Properties Under Continuous Irrigation Practice , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala I. ABDULKARIM, Yusuf M. BABA, Suleiman I. ENEHE, Kamoru A. SALAM, Umar IDRISS, Synthesis of Activated Carbon from Corncob for the removal of Lead (Pb²⁺) ions from Aqueous solution using a packed bed Adsorption Column , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Raji ABDULRASAK, Abdulaziz S. ALIYU, Assessment of Occupational Health Hazards Among Oil Refinery Workers at Kaduna Refining and Petrochemical Company , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Mathew O. ADEOTI, Victor N. HARUNA, Omolayo M. IKUMAPAYI, Timothy A. ADEKANYE, Development and Characterization of Epoxy-Based Asbestos-Free Brake Pad Composites Reinforced with Cow Hoof Particulates , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Umar A. IBRAHIM, Abdulra’uf G. SHARIFAI, Hybrid CNN Feature Fusion with Optimization for Precision Potato Leaf Disease Classification , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Yetunde M. ALADEITAN, Abdulmojeed O. OLUOGUN, Potential of Zinc Oxide Nanoparticles for Remediation of Oil-Contaminated Soil and Water , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Muhammad M. HAMIDU, Mathew KATAMBI, Omar FARUQ, Techno-Economic and Environmental Assessment of a Solar PV-Based Microgrid for Residential Electrification in Gwange I, Maiduguri Using HOMER Pro , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Dandison M. WALI, Beabu B. DUMKHANA, Raymond A. EKEMUBE, Silas O. NKAKINI, Smart Assessment of Tractor Noise Levels During Tillage Operation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
