Evaluation on the Rheological Properties of Water-Based Drilling Mud: A Case Study of Ire-Ekiti Clay
- Authors
-
-
Joseph O. AJAYI
Author
-
Adekunle T. ADENIYI
Author
-
Mufliah G. OMOFOYEWA
Author
-
Abel A. ADEYI
Author
-
Abdulwahab GIWA
Author
-
- Keywords:
- Ire-Ekiti clay, beneficiation, bentonite, rheological properties, water-based mud.
- Abstract
-
Rheological properties are tested throughout a drilling operation as it is critical in the control and maintenance of rheological properties. This paper investigates the evaluation on the Marsh funnel viscosity, apparent viscosity, and fluid loss of water-based drilling mud. The native clay originated in Ire-Ekiti, Ekiti State, Nigeria. In order to create water-based mud, the characteristics of the clay were determined and compared with those of bentonite, the preferred clay for drilling operations. The results show that the generated drilling fluid's pH levels and rheological characteristics differ significantly from bentonite. This is due to the fact that it attracts clay and water, and the low concentration of sodium cations (Na++) prevents it from swelling. When the local mud was beneficiated using soda ash (Na2CO3) at a concentration of 5.0 g clay at 63 microns screen size to 350 ml of the mud, the pH rose by 15.2% from 8.11 to 11.02 and by 8% from 10.00 to 11.73. When PAC-HV was added to the combination, water loss significantly decreased by 32.8% and 66.8%, while marsh funnel viscosity increased by 4.4% and 7.6%, apparent viscosity fell by 26.6% at 63 microns sieve size, and severely rose by 55.8% at 150 microns filter size. After adding 10 g of barite (BaSO4) to 350 ml of the mixture, the clay density rose by 1.2% at both sieve sizes, from 8.50 lb/gal to 8.70 lb/gal. Therefore, the Ire clay has good rheological properties at substantial concentrations when beneficiated with soda ash (Na2CO3), which would compare favorably with those of bentonite; however, PAC-HV must be increased above 1.0 g at 150 microns filter size. Ire clay can therefore be used to make a drilling fluid.
- References
- Downloads
- Published
- 09-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Martins Y. OTACHE, Iyanda M. ANIMASHAUN, Sadeeq A. MOHAMMED, Emmanuel O. AGBESE, Spatiotemporal Variability and Trend Analysis of Rainfall and Temperature in Northern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Chioma I. MADUEKE, Audu YEMI, Joseph M. ABIDEMI, Eberechukwu C. DIM, Plastic Waste Challenges in Nigeria: A Review on Pollution, Sorting, and Recycling Approaches , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Jamesmary E. AYANRU, Matthew S. ABOLARIN, Omotayo I. OGUNWEDE, Henry I. MORKAH, Adeshola O. OPENIBO, Development and Performance Evaluation of a Dryer for Preserving Vegetable Leaves , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Shehu ABDULKADIR, Dangora N. DAUDA, Aliyu A. ADAMU, Badaru M. SANI, Rilwan ABUBAKAR, Timothy A. TIMOTHY, Uchechukwu M. AGBOM, Abubakar S. ABUBAKAR, Development and Performance Evaluation of a Modified Active Evaporative Cooling System for Postharvest Preservation of Selected Vegetables , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Gbenga G. OSEKE, Fatima A. SHEHU, Muhammad K. ABBA, Effects of Completion Fluid Components on Reservoir Rock Matrix and Its Performance for Workover Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Abubakar LAWAL, Abdulkadir O. ABDULBAKI, Nathaniel SALAWU, Bala A. SALIHU, Mamman A. THOMAS, Abraham U. USMAN, Sub-6 GHz Millimeter-Wave Metamaterial Antenna with Reconfigurable Radiation Patterns for Enhanced Wireless Communication , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Usman A. ABDURRAHMAN, Abdulkadir A. BICHI, Usman HARUNA, Akibu M. ABDULLAHI, A Hybrid Graph Neural Network Framework Integrating Handcrafted Features for Real-Time Iris Recognition in Motion , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad B. MUHAMMAD, Noor S. B. MANSOR, Fariha R. KHAN, Investigating Breakdown Strength Based on Trapping Profile in Cross-Linked Polyethylene (XLPE) Nanocomposites , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Nsikan L. AKPAN, Akaniyene OBOT, Olusegun A. AFOLABI, Improvement of Power Efficiency of Sensor Network Using Ant Colony Optimization and K-Means Clustering Technique , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Salisu MOHAMMED, Abdulfatai JIMOH, Abdullahi M. EVUTI, Abdulwahab GIWA, Abubakar A. IBRAHIM, Pretreatment and Characterization of Selected Precursors for Chitin/Chitosan Production , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Hyelni G. MSHELIA, Abdulfatai JIMOH, Mohammed A. EVUTI, Abubakar A. IBRAHIM, Abdulwahab GIWA, Adeola G. OLUGBENGA, Potential of Onion Skin, Luffa cylindrica, and Corn Cob as Cellulose Sources: A Study of Their Proximate, Ultimate, and Morphological Properties , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ephraim G. KEFAS, Abdulfatai JIMOH, Mohammed A. EVUTI, Abubakar A. IBRAHIM, Abdulwahab GIWA, Adeola G. OLUGBENGA, Luffa Sponge, Banana Stem and Delonix regia Seed Characterization as Potential Biosorbents for Industrial Wastewater Remediation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
