Solar-Powered Low-Cost Housing: Designing Off-Grid Communities with Interlocking Stabilised Soil Blocks (ISSB)
- Authors
-
-
Obafemi A. IBITOYE
Author
-
Jemimah O. TOLU-ALALADE
Author
-
- Keywords:
- Initial void ratio, Energy efficiency; Interlocking Stabilised Soil Blocks (ISSB); solar energy; off-grid housing; sustainable design.
- Abstract
-
This study explores the integration of solar photovoltaic (PV) systems with Interlocking Stabilised Soil Blocks (ISSB) to develop affordable, energy-efficient housing models for Nigeria’s off-grid communities. Using quantitative survey data from 424 respondents including architects, engineers, builders, and residents the research assessed awareness, perceived compatibility, affordability, and willingness to adopt ISSB–solar housing. Statistical analysis through chi-square, Pearson correlation, and ANOVA revealed a strong positive perception of ISSB–solar integration (mean = 4.12; SD = 0.78), with significant relationships between affordability and adoption (r = 0.52, p < .01) and between thermal comfort and energy efficiency (r = 0.47, p < .01). Over 70 % of participants affirmed that ISSB structures can safely support PV panels, and 65 % recognized reduced long-term energy costs despite higher initial investment. The findings demonstrate that coupling ISSB with solar systems enhances thermal comfort, promotes energy independence, and aligns with sustainable development goals. The study recommends financial incentives, technical capacity-building, and community-driven pilot projects to scale up solar-powered ISSB housing as a pathway toward resilient, low-carbon rural development in Nigeria.
- References
- Downloads
- Published
- 13-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Oyeyemi T. AFOROLAGBA-BALOGUN, Olumide A. TOWOJU, Characterization of Fuel Produced from Nylon (Polyamide) and Polyethylene Terephthalate (PET) Wastes with Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar S. MOHAMMED, Mohammed ALIYU, Mohammed U. GARBA, Ibrahim S. MOHAMMED, Ibrahim A. KUTI, Meshack S. IMOLOGIE, Umaru MUSA, Olalekan D. ADENIYI, Peter A. ADEOYE, Abubakar G. ISAH, Folarin T. OLORUNMOTITO, Development and Packaging of Eco-friendly Biosolid Briquettes Synthesised with Bagasse for Green Energy Generation and Utilisation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Adegboyega L. ALUKO, Ayodeji T. BALOGUN, Environmental Impact of Gold Mining Activities and Sustainable Mitigation Approaches: Case Study of Ilesa Surrounding areas, Osun State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Iliya D. IBRAHIM, Suleiman A. BABALE, Sani H. LAWAN, Auwal A. ABUBAKAR, Design of a Modified Wideband Microstrip Patch Antenna for WLAN/WiMAX Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Gbenga G. OSEKE, Chisom S. AMADI, Abubakar U. RAJI, Hydrogen Production from Flare Gas via Steam Methane Reforming: A Simulation-Based Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Ahmad ADO, Abdullahi YAHAYA, Abubakar J. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF, Kinetic Study of 4-Nitrophenol Sonocatalytic Degradation , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Joseph K. ZAMBWA, Jibril M. KAURA, Ocholi AMANA, Abdrasheed S. ABDURASHEED, Ejembi WILLIAMA, Evaluation of Materials and Performance Characteristics of Tannery Sludge Crumb Rubber Concrete (TSCRC) , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Mohammed B. ABDULLAHI, Impact of Agro-Chemicals on Groundwater Quality and Soils of Irrigation Sites: A Case Study of Chanchaga Irrigation Scheme, Minna, Niger State , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abdulkareem BELLO, Saleh S. LUKMAN, Tasie M. CHIZE, Yusuf O. ADEIZA, Chibuzor A. OKAFOR, Abdullahi O. YAKUBU, Design, Simulation, and 3D Printing of a Lightweight Drone Frame for Farm Monitoring , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Abdulkarim AMINU, Mohammed ALIYU, Ibrahim S. MOHAMMED, Iyanda M. ANIMASHAUN, Peter DANIEL, Mohammad USMAN, Production and Optimisation of Parameters for Density and Ash Content of Briquettes Produced from Sorghum Stalks and Groundnut Shells Using African Locust Bean (Parkia biglobosa) Pulp as a Binding Agent , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
You may also start an advanced similarity search for this article.
