Solar-Powered Low-Cost Housing: Designing Off-Grid Communities with Interlocking Stabilised Soil Blocks (ISSB)
- Authors
-
-
Obafemi A. IBITOYE
Author
-
Jemimah O. TOLU-ALALADE
Author
-
- Keywords:
- Initial void ratio, Energy efficiency; Interlocking Stabilised Soil Blocks (ISSB); solar energy; off-grid housing; sustainable design.
- Abstract
-
This study explores the integration of solar photovoltaic (PV) systems with Interlocking Stabilised Soil Blocks (ISSB) to develop affordable, energy-efficient housing models for Nigeria’s off-grid communities. Using quantitative survey data from 424 respondents including architects, engineers, builders, and residents the research assessed awareness, perceived compatibility, affordability, and willingness to adopt ISSB–solar housing. Statistical analysis through chi-square, Pearson correlation, and ANOVA revealed a strong positive perception of ISSB–solar integration (mean = 4.12; SD = 0.78), with significant relationships between affordability and adoption (r = 0.52, p < .01) and between thermal comfort and energy efficiency (r = 0.47, p < .01). Over 70 % of participants affirmed that ISSB structures can safely support PV panels, and 65 % recognized reduced long-term energy costs despite higher initial investment. The findings demonstrate that coupling ISSB with solar systems enhances thermal comfort, promotes energy independence, and aligns with sustainable development goals. The study recommends financial incentives, technical capacity-building, and community-driven pilot projects to scale up solar-powered ISSB housing as a pathway toward resilient, low-carbon rural development in Nigeria.
- References
- Downloads
- Published
- 13-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Mohammed B. ABDULLAHI, Impact of Agro-Chemicals on Groundwater Quality and Soils of Irrigation Sites: A Case Study of Chanchaga Irrigation Scheme, Minna, Niger State , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adegoke P. ADEBOLA, Abubakar S. MOHAMMED, Umaru MUSA, Abubakar A. IBRAHIM, Abubakar G. ISAH, Mohammed U. GARBA, Development of Coconut Shell Hydrochar for Lead Removal from Pharmaceutical Wastewater , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Oluyemi S. ONIFADE, Olusegun O. AJIDE, Development and Performance Evaluation of a Semi-Automated Impact Fracture Tester , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Aminu D. MAHMUD, Imran N. IBRAHIM, Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abdulrahman S. USMAN, Folorunsho ABERUAGBA, Moses A. OLUTOYE, Umar MUSA, Mohammed ALHASSAN, Calcium Oxide Derived from Okpella Limestone as a Heterogeneous Catalyst for Biodiesel Production: Synthesis, Characterisation and Stability Assessment , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar LAWAL, Abdulkadir O. ABDULBAKI, Nathaniel SALAWU, Bala A. SALIHU, Mamman A. THOMAS, Abraham U. USMAN, Sub-6 GHz Millimeter-Wave Metamaterial Antenna with Reconfigurable Radiation Patterns for Enhanced Wireless Communication , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Osemwegie IKPONMWOSA-EWEKA, Alexander I. IDEMUDIA, Predicting Convective Heat Transfer Coefficient in TIG Welding via Adaptive Neuro-Fuzzy Inference System (ANFIS) , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yusuf L. SHUAIB-BABATA, Kabiru S. AJAO, Yusuf O. BUSARI, Ibrahim O. AMBALI, Toheeb A. NURUDEEN, John A. OKOLO, Gabriel A. LONGE, Inhibitory Potential of Blended Parkia biglobosa and Delonix regia Extracts on Corrosion of AISI 1007 Steel in 1.0 M Hydrochloric Acid Medium , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Agbonyososo D. OKPERE, Kenneth K. ADAMA, Safety Concerns on the Use of Compressed Natural Gas (CNG) in the Nigerian Automobile Industry , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Damilare L. ADEKEYE, Isiyaku SALEH, Yemisi E. AKINSELI, Design and Implementation of an Automatic Gate for Cars at Railway Crossings , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
