Multi-Criteria Decision Analysis and Optimization Approaches in Sustainable Waste-to-Energy Planning: A Systematic Review
- Authors
-
-
Sirajo ALHASSAN
Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Author
-
Abdullahi A. ADAMU
Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Author
-
Mohammed T. JIMOH
Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Author
-
- Keywords:
- Waste-to-Energy (WtE) Systems, Municipal Solid Waste Management, Multi-Criteria Decision Analysis (MCDA), Multi-Objective Optimization, Sustainable Infrastructure Planning, Decision-Support Systems, Developing Urban Systems.
- Abstract
-
Waste-to-Energy (WtE) systems are increasingly recognized as a strategic solution for sustainable municipal solid waste management, particularly in rapidly urbanizing regions confronted with landfill scarcity, environmental pressures, and rising energy demand. However, the selection and design of appropriate WtE systems require simultaneous consideration of economic viability, environmental performance, technical feasibility, and socio-institutional acceptance. This study presents a systematic review and critical synthesis of methodological approaches applied in WtE planning, with particular emphasis on Multi-Criteria Decision Analysis (MCDA), mathematical optimization models, multi-objective programming, metaheuristic algorithms, and hybrid MCDA–optimization frameworks. The review examines the evolution, applications, strengths, and limitations of these approaches in supporting technology selection, facility siting, system configuration, and resource allocation decisions. Findings indicate that MCDA techniques are effective in incorporating stakeholder preferences and qualitative sustainability criteria, but lack detailed engineering-level system design capability. In contrast, optimization models provide rigorous quantitative frameworks for operational feasibility and infrastructure configuration, yet often underrepresent social, institutional, and governance constraints. Hybrid frameworks emerge as the most comprehensive methodological direction, integrating preference-based evaluation with constraint-based system modeling to enhance both strategic alignment and technical robustness. The study identifies critical research gaps, including insufficient treatment of uncertainty, limited empirical validation, and inadequate contextual adaptation to developing urban environments characterized by data constraints and institutional fragmentation. By synthesizing methodological trends and challenges, this review advances structured, context-sensitive decision-support systems for sustainable and implementable WtE planning.
- References
- Downloads
- Published
- 23-03-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Suleiman ZUBAIR, Hassan T. ABDULAZEEZ, Bala A. SALIHU, Gambo MOHAMMED, A Low-Cost, Offline-Capable Wireless Soil Moisture Monitoring System for Smallholder Farmers: Design, Validation, and Agronomic Impact , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Peter EDOKA, Assessment of the Role of Kogi State Government in Flood Mitigation in Lokoja, Kogi State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ibrahim A. KUTI, Sunday E. OGUNMOLA, Peter A. ADEOYE, Evaluation of the Agricultural Best Management Practices (ABMPs) and Their Effect on Discharge Reduction of Shiroro Dam Site using SWAT Model , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Raphina O. UBAH, Oluwaseun S. OGUNGBEMI, Olabode O. OLUTOMILOLA, Impact of Open Dumpsites on Groundwater Quality: Geophysical and Hydrochemical Evidence from Ijan-Ekiti, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mohammed U. GARBA, Usman B. ABDULLAHI, Hayatudden S. BARAYAIS, Aisha B. FARUQ, Suleiman IDRIS, Abubakar M. MUHAMMAD, Abubakar S. MOHAMMED, Treatment of Gold Mining Wastewater: A Review of Current Technologies and Future Perspectives , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mohammed B. ABDULLAHI, Impact of Agro-Chemicals on Groundwater Quality and Soils of Irrigation Sites: A Case Study of Chanchaga Irrigation Scheme, Minna, Niger State , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mu’azu ABUBAKAR, Abubakar B. ALIYU, Dauda GARBA, Fabrication, Characterization, and Application of Clay-Based Ceramic Membranes for Oily Wastewater Treatment: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Munir A. ADEWOYE, Ahmed ALIYU, Usman A. ALI, Abdulrasheed JIMOH, Blockchain-Based Food Supply Chain Traceability: A Systematic Review of Privacy Preserving and Scalability , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abdulkareem BELLO, Yusuf O. ADEIZA, Saleh S. LUKMAN, Muhammad A. ADAMU, Chibuzor A. OKAFOR, Abdulaziz A. ABDULSALAM, Production of Silica from ABU Zaria Dam Sand as an Eco-Friendly Corrosion Inhibitor Using Nanotechnology , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mukhtar N. YAHYA, Sohaib ALHAJHUSSEIN, Wastewater Analysis Using Kubota Membrane Bioreactor System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Experimental Characterization and Seasonal Energy Potential Assessment of Municipal Solid Waste in Kano City, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
