Multi-Criteria Decision Analysis and Optimization Approaches in Sustainable Waste-to-Energy Planning: A Systematic Review
- Authors
-
-
Sirajo ALHASSAN
Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Author
-
Abdullahi A. ADAMU
Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Author
-
Mohammed T. JIMOH
Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Author
-
- Keywords:
- Waste-to-Energy (WtE) Systems, Municipal Solid Waste Management, Multi-Criteria Decision Analysis (MCDA), Multi-Objective Optimization, Sustainable Infrastructure Planning, Decision-Support Systems, Developing Urban Systems.
- Abstract
-
Waste-to-Energy (WtE) systems are increasingly recognized as a strategic solution for sustainable municipal solid waste management, particularly in rapidly urbanizing regions confronted with landfill scarcity, environmental pressures, and rising energy demand. However, the selection and design of appropriate WtE systems require simultaneous consideration of economic viability, environmental performance, technical feasibility, and socio-institutional acceptance. This study presents a systematic review and critical synthesis of methodological approaches applied in WtE planning, with particular emphasis on Multi-Criteria Decision Analysis (MCDA), mathematical optimization models, multi-objective programming, metaheuristic algorithms, and hybrid MCDA–optimization frameworks. The review examines the evolution, applications, strengths, and limitations of these approaches in supporting technology selection, facility siting, system configuration, and resource allocation decisions. Findings indicate that MCDA techniques are effective in incorporating stakeholder preferences and qualitative sustainability criteria, but lack detailed engineering-level system design capability. In contrast, optimization models provide rigorous quantitative frameworks for operational feasibility and infrastructure configuration, yet often underrepresent social, institutional, and governance constraints. Hybrid frameworks emerge as the most comprehensive methodological direction, integrating preference-based evaluation with constraint-based system modeling to enhance both strategic alignment and technical robustness. The study identifies critical research gaps, including insufficient treatment of uncertainty, limited empirical validation, and inadequate contextual adaptation to developing urban environments characterized by data constraints and institutional fragmentation. By synthesizing methodological trends and challenges, this review advances structured, context-sensitive decision-support systems for sustainable and implementable WtE planning.
- References
- Downloads
- Published
- 23-03-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Suleiman ZUBAIR, Hassan ABDULAZEEZ, Bala A. SALIHU, Abubakar A. SHUAIBU, Design and Implementation of a BLE 5.0-Enabled Wearable Finger Mouse Using the XIAO nRF52840 Platform , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ismaila MAHMUD, Mahmud MUSTAPHA, Sulaiman H. SULAIMAN, Ibrahim ABDULWAHAB, Ibrahim A. SHEHU, Aminu J. ALIYU, Yusuf S. ABU, Nuraddeen A. ILIYASU, Solar Irradiance Forecast using Feed Forward Neural Network: A Case Study of Zaria Town , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala I. ABDULKARIM, Phebe O. JAMES, Utilization of Microbial Fuel Cells for Electricity Generation from Gwagwalada Abattoir Wastewater , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Nafisa A. ABDULHAMID, Danladi D. USMAN, Kabiru I. JAHUN, Rotkangmwa J. SATI, Yahaya U. JAURO, Abdulmajid M. HASHIR, Yusuf G. SHIMBURA, Development of a Solar Dryer with Multi-Products and a Residual Moisture Control System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Sulaiman Y. ADAMU, Fadimatu N. DABAI, Abdulazeez Y. ATTA, Baba Y. JIBRIL, Preparation and Characterization of Enhanced Hierarchical Zn-Ni/HZSM-5 Catalysts for Potential use in Catalytic reactions to Upgrade Bio-Oil and Hydrogen from Biomass Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. HAMIDU, Development of MATLAB-Based Model for Solar Radiation Prediction and Photovoltaic Panel Tilt Optimization Angle for Maiduguri Region, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Cyril OCHERI, Victor S. AIGBODION, Esther O. AMEH, Ihebuchuwu C. EZEAKU, Chibuikem A. OKAFOR, Uchenna C. AMAZUE, Eddy R. OMONIGHO, Electrochemical Analysis of Azadirachta indica Leaves as a Corrosion inhibitor on Mild Steel in 1 M H2SO4 , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Tina I. FRANCIS-AKILAKI, Onimi O. ASHAMA, Raymond A. EKEMUBE, Vibration Analysis as a Transformative Approach to Condition-Based Monitoring , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Hyelni G. MSHELIA, Abdulfatai JIMOH, Mohammed A. EVUTI, Abubakar A. IBRAHIM, Abdulwahab GIWA, Adeola G. OLUGBENGA, Potential of Onion Skin, Luffa cylindrica, and Corn Cob as Cellulose Sources: A Study of Their Proximate, Ultimate, and Morphological Properties , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar S. MOHAMMED, Mohammed ALIYU, Mohammed U. GARBA, Ibrahim S. MOHAMMED, Ibrahim A. KUTI, Meshack S. IMOLOGIE, Umaru MUSA, Olalekan D. ADENIYI, Peter A. ADEOYE, Abubakar G. ISAH, Folarin T. OLORUNMOTITO, Development and Packaging of Eco-friendly Biosolid Briquettes Synthesised with Bagasse for Green Energy Generation and Utilisation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
