Multi-Criteria Decision Analysis and Optimization Approaches in Sustainable Waste-to-Energy Planning: A Systematic Review
- Authors
-
-
Sirajo ALHASSAN
Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Author
-
Abdullahi A. ADAMU
Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Author
-
Mohammed T. JIMOH
Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Author
-
- Keywords:
- Waste-to-Energy (WtE) Systems, Municipal Solid Waste Management, Multi-Criteria Decision Analysis (MCDA), Multi-Objective Optimization, Sustainable Infrastructure Planning, Decision-Support Systems, Developing Urban Systems.
- Abstract
-
Waste-to-Energy (WtE) systems are increasingly recognized as a strategic solution for sustainable municipal solid waste management, particularly in rapidly urbanizing regions confronted with landfill scarcity, environmental pressures, and rising energy demand. However, the selection and design of appropriate WtE systems require simultaneous consideration of economic viability, environmental performance, technical feasibility, and socio-institutional acceptance. This study presents a systematic review and critical synthesis of methodological approaches applied in WtE planning, with particular emphasis on Multi-Criteria Decision Analysis (MCDA), mathematical optimization models, multi-objective programming, metaheuristic algorithms, and hybrid MCDA–optimization frameworks. The review examines the evolution, applications, strengths, and limitations of these approaches in supporting technology selection, facility siting, system configuration, and resource allocation decisions. Findings indicate that MCDA techniques are effective in incorporating stakeholder preferences and qualitative sustainability criteria, but lack detailed engineering-level system design capability. In contrast, optimization models provide rigorous quantitative frameworks for operational feasibility and infrastructure configuration, yet often underrepresent social, institutional, and governance constraints. Hybrid frameworks emerge as the most comprehensive methodological direction, integrating preference-based evaluation with constraint-based system modeling to enhance both strategic alignment and technical robustness. The study identifies critical research gaps, including insufficient treatment of uncertainty, limited empirical validation, and inadequate contextual adaptation to developing urban environments characterized by data constraints and institutional fragmentation. By synthesizing methodological trends and challenges, this review advances structured, context-sensitive decision-support systems for sustainable and implementable WtE planning.
- References
- Downloads
- Published
- 23-03-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Chinemeogo C. OZIOKO, Ikechukwu C.-E. IKE-EZE, Nnanyelugo O. EDWIN, Dimelu K. EBUBE, Charles MBOHWA, Investigation of the Mechanical and Thermal Properties of Waste Toner Powder Reinforced Polyester Composite for Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. HAMIDU, Abubakar M. EL-JUMMAH, Muhammad SHUWA, An Assessment of Power Sources for Improved Energy Supply in University of Maiduguri , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN, BAT-Optimized PID and ANFIS Torque-Based MPPT for a 0.5 MW PMSG-Based Wind Energy Conversion System Under Dynamic Wind Conditions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Umar A. ADAMU, Ya’u S. HARUNA, Ganiyu A. BAKARE, Buhari H. MAMMAN, Kunduli MUSTAPHA, Hadi M. ADAMU, Ismaila MAHMUD, Design and Simulation of a 200 MWp Floating Solar PV Plant Integrated with the Kainji Hydropower Plant, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Benjamin T. ABUR, Abubakar A. WARA, David ISAH, Mary D. IGBUR, Catherine N. KWAGHMANDE, Co-Gasification of Sugarcane Bagasse and Coal: A Study on Thermal Characteristics and Efficiency , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Osagie I. IHENYEN, Raymond A. EKEMUBE, Development of an Agro-Waste Diesel Engine Powered Shredding Machine , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Aliu S. SALIU, Ejike C. ANENE, Buhari M. HASSAN, Sabo M. HASSAN, Salisu H. MOHAMMED, Nafisa S. USMAN, Addressing Resource Allocation Challenges in Wireless Networks with Cultural Smell Agent Optimization Algorithms: A Literature Survey , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Afeez A. AWOLOKUN, Olusegun O. ALUKO, Temitope F. AWOLUSI, Mayowa A. OGIDI, Performance Evaluation of Pervious Concrete Containing Glass Cullet and Glass Powder for Sustainable Construction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Nuhu MOHAMMED, Garkuwa Y. ADAMU, Abubakar A. FACHWAY, Aminu MOHAMMED, Afolayan A. OLASUNKANMI, Odoh F. CHIMEZIE, Muhammad A. YUSUF, Development of A Water-Recycling Pico Hydropower System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Peter EDOKA, Incidents of Flood Disaster in Kaduna: Preventive and Mitigating Measures , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Experimental Characterization and Seasonal Energy Potential Assessment of Municipal Solid Waste in Kano City, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
