Effective Food Waste Utilization: A Veritable Source of Biofuel for Nigerian Economic Sustenance and Development - A Review
- Authors
-
-
Benedict O. EDENSETING
Department of Petroleum and Gas Engineering, Nigeria Maritime University, Okorenkoko, Nigeri
Author
-
Innocent O. OBOH
Department of Chemical Engineering, University of Uyo, Uyo, Nigeria
Author
-
Alexander A. JOCK
Department of Chemical Engineering, Federal University, Wukari, Nigeria
Author
-
- Keywords:
- Waste, environment, energy, biofuel, economics.
- Abstract
-
Waste generation is on the increase as the population of Nigeria increases. The current waste management practice is becoming unsustainable in the country. Nigeria generates over 25 million tonnes as municipal solid waste with one third of it generated being kitchen waste. Demand for biofuels is rapidly growing worldwide as petroleum-based fuels are finite and environmentally unfriendly. Kitchen waste is capable of producing biogas, bioethanol and biodiesel which will afford the country affordable cleaner energy for national development. It is therefore imperative to optimize this source of renewable energy for advancement of transportation, industrial growth, power generation and overall national economic growth. Hence, this review highlights the enormous energy potential in kitchen cum domestic waste.
- References
- Downloads
- Published
- 03-07-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Jamesmary E. AYANRU, Matthew S. ABOLARIN, Omotayo I. OGUNWEDE, Henry I. MORKAH, Adeshola O. OPENIBO, Development and Performance Evaluation of a Dryer for Preserving Vegetable Leaves , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Daniel N. MBACHIRIN, David E. ABEL, Paul A. OMALE, Precision Agriculture Technologies for Smallholder Farming Systems in Developing Countries: A Scoping Review of Opportunities, Limitations and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Amina UTHMAN, Shamsuddeen SULAIMAN, Evaluation of Cost Factors Influencing the Adoption of Sustainable Construction Practices in Abuja, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Salisu MOHAMMED, Abdulfatai JIMOH, Abdullahi M. EVUTI, Abdulwahab GIWA, Abubakar A. IBRAHIM, Pretreatment and Characterization of Selected Precursors for Chitin/Chitosan Production , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Nafisa A. ABDULHAMID, Danladi D. USMAN, Kabiru I. JAHUN, Rotkangmwa J. SATI, Yahaya U. JAURO, Abdulmajid M. HASHIR, Yusuf G. SHIMBURA, Development of a Solar Dryer with Multi-Products and a Residual Moisture Control System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Samaila J. EL-PATEH, Ibrahim IDRIS, Waste Management in Bauchi Metropolis: Solid Measure and Characterization in Municipality , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mutiat S. YISA, Cross-Regional Energy Strategies: Evaluating Japan’s Power Blueprint for Nigeria’s Needs , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Nsikan L. AKPAN, Akaniyene OBOT, Olusegun A. AFOLABI, Improvement of Power Efficiency of Sensor Network Using Ant Colony Optimization and K-Means Clustering Technique , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Chinemeogo C. OZIOKO, Ikechukwu C.-E. IKE-EZE, Nnanyelugo O. EDWIN, Dimelu K. EBUBE, Charles MBOHWA, Investigation of the Mechanical and Thermal Properties of Waste Toner Powder Reinforced Polyester Composite for Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Victor A. NSABA, Sabiu B. YUSUF, Kafayat A. IBRAHIM, Consumer Perceptions of Artificial Intelligence (AI)-Driven Smart Grids and Energy Efficiency in Northwest Nigeria’s Power Distribution Sector: A Multi-State Case Study of Sokoto, Kebbi, and Zamfara , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
