Techno-Economic and Environmental Assessment of a Solar PV-Based Microgrid for Residential Electrification in Gwange I, Maiduguri Using HOMER Pro
- Authors
-
-
Muhammad M. HAMIDU
Department of Mechanical Engineering, University of Maiduguri, Maiduguri, Nigeria
Author
-
Mathew KATAMBI
Department of Mechanical Engineering, University of Maiduguri, Maiduguri, Nigeria
Author
-
Omar FARUQ
Department of Mechanical Engineering, University of Maiduguri, Maiduguri, Nigeria
Author
-
- Keywords:
- Solar PV microgrid, battery energy storage, techno-economic optimization, Homer Pro software.
- Abstract
-
The Nigerian power sector continues to struggle with outdated infrastructure, security related disruption, climate change disruptions, and unstable grid supply. In densely populated areas like Gwange I Ward, Maiduguri, centralized electricity systems remain inadequate, forcing residents to depend on costly diesel and petrol generators. This study aims to address this issue by optimizing a solar photovoltaic (PV)–battery energy storage system (BESS) microgrid. The system for Gwange I was designed and optimized using HOMER Pro v3.14, integrating load estimation, solar resource analysis, component sizing, technical performance and economic analysis into the methodological framework. Simulation results indicate that the proposed configuration comprising a 1,085 kW PV array and 1,172 kWh of usable battery storage achieves renewable penetration above 660% and delivers an annual generation of approximately 1.95 GWh. The system's competitiveness against diesel alternatives is confirmed by economic analysis, with a levelized cost of energy (LCOE) of ₦28.68/kWh and a payback period of 2.3 years. The study also highlights the importance of thermal effects on system performance, revealing a 2.7% drop in annual PV output due to temperature increase. Environmentally, noise and air pollution are reduced, and annual CO₂ emissions are reduced by over 1,300 metric tonnes. The study confirms that decentralized solar microgrids with resilience-focused design offer a sustainable, reliable route to urban electrification in weak and climate-sensitive contexts, thus directing policy for microgrid deployment and integration of thermal management.
- References
- Downloads
- Published
- 22-09-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Tunji J. ERINLE, Daniel C. UGURU-OKORIE, Abiodun M. ADEBIMPE, Adeolu A. ADEDIRAN, Hilary U. EZEA, A Comprehensive Review of In-Situ Monitoring and Post-Process Defect Detection in Additive Manufacturing , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Daniel N. MBACHIRIN, David E. ABEL, Paul A. OMALE, Precision Agriculture Technologies for Smallholder Farming Systems in Developing Countries: A Scoping Review of Opportunities, Limitations and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Aminu D. MAHMUD, Imran N. IBRAHIM, Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mohammed U. GARBA, Usman B. ABDULLAHI, Hayatudden S. BARAYAIS, Aisha B. FARUQ, Suleiman IDRIS, Abubakar M. MUHAMMAD, Abubakar S. MOHAMMED, Treatment of Gold Mining Wastewater: A Review of Current Technologies and Future Perspectives , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Zainab B. LAPAI, Joseph A. OJENIYI, Ismail IDRIS, Abdulkadir O. ABDULBAKI, Jennifer BALA, Entropy-Guided Neural Architecture for Family-Level Classification of Windows Ransomware , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Yetunde M. ALADEITAN, Abdulmojeed O. OLUOGUN, Potential of Zinc Oxide Nanoparticles for Remediation of Oil-Contaminated Soil and Water , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Vincent B. ONIGBARA, Muftau A. GBENLE, Sunday I. AGU, Mechanical and Biological Performance of Titanium Hydroxyapatite Composites for Biomedical Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Kamoru O. OLADOSU, Kabiru MUSTAPHA, Ayodeji S. OLAWORE, Akeem B. IBRAHIM, Abdulganiyu ISSA, Development of a Free-Fall Pyrolysis Reactor for Biofuel Production Using Sugarcane Bagasse and Cassava Rhizomes as Feedstocks , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mu’azu ABUBAKAR, Abubakar B. ALIYU, Dauda GARBA, Fabrication, Characterization, and Application of Clay-Based Ceramic Membranes for Oily Wastewater Treatment: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Titilope A. BANJOKO, Bilkisu L. MUHAMMAD-BELLO, Predicting Requirement Change Using Bayesian Networks on Historical Traceability Data , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Hafsah A. ABDULRAHMAN, Muhammad M. HAMIDU, Techno-Economic Optimization of a Hybrid PV-Wind-Waste-to Energy System for the University of Maiduguri , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. HAMIDU, Development of MATLAB-Based Model for Solar Radiation Prediction and Photovoltaic Panel Tilt Optimization Angle for Maiduguri Region, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. HAMIDU, Abubakar M. EL-JUMMAH, Muhammad SHUWA, An Assessment of Power Sources for Improved Energy Supply in University of Maiduguri , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
