Development of a Wearable Fall Sensing Device for Enhanced Independent Living Among the Elderly
- Authors
-
-
Olusola K. AKINDE
Department of Electrical and Biomedical Engineering, Abiola Ajimobi Technical University, Ibadan, Oto State, Nigeria
Author
-
Abolaji O. ILORI
Department of Electrical and Biomedical Engineering, Abiola Ajimobi Technical University, Ibadan, Oto State, Nigeria
Author
-
Habeeb A. ARIKEWUYO
Department of Electrical and Biomedical Engineering, Abiola Ajimobi Technical University, Ibadan, Oto State, Nigeria
Author
-
- Keywords:
- Fall detection, sensors’ integration, trigger-speed, execution-time, elderly-people.
- Abstract
-
Unwitnessed falls among elderly people which consequently has resulted in cases of fatality before caregivers are alerted for prompt response, has been a call for concern. This was the motivation for this work. It integrates a motion sensors and Internet of Things (IoT) algorithms with a web application platform that alerts caregivers. The device would measure the wearer’s physical parameters; movement speed and angular orientation through the sensors. The design makes use of two sensors; the accelerometer for measuring acceleration forces and the gyroscope for rotational motion. The adopted method includes component selection, sensor integration, data acquisition and processing, fall detection algorithm, wireless communication, user interface, power management, testing, and packaging. The test for fall sensor for elderly people was carried out by attaching the device to a mannequin to measure the accuracy of the device. The mannequin was pushed in various ways to check for accuracy when detecting various types of falls. The sensor’s data were sent to the web server (ThingSpeak) at 15s intervals for visualization by the user and to enhance storage of data about fall incidences. The readings from the MPU6050 sensor had good data precision with an average movement speed of 8.37 m/s. The readings from the sensor showed an average trigger speed of 8.05 m/s and an average execution time of 2.4 s. There is a 90% accuracy in the detection of fall occurrences. The use of fall sensors for fall detection has greatly improved the detection of fall occurrences among elderly people, providing a safer approach to caring for elderly people.
- References
- Downloads
- Published
- 20-09-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Peter C. ANYAORA, Emily T. KORMENE, Andrew A. UDUIMOH, Temple C. OKEAHIALAM, Callistus T. IKWUAZOM, Lasotte B.-M. YAKUBU, Franklyn O. OFOH, Rukayat B. AHMED, Systematic Literature Review on Hate Speech Detection Technology with English and Mixed Language on Social Media Space , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Olalekan OGUNBIYI, Lambe M. ADESINA, Ibrahim Z. ARIYO, Development of an IoT-Based Smart Distribution Transformer Monitoring System for Reliable Rural Electrification , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Ayobami O. IDOWU, Integration of Green Technologies for Sustainable Facility Management of Public Buildings in Edo State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Abdulrasheed MUSTAPHA, Kolawole O. MORAKINYO, Seyi O. FARODOYE, Rilwan B. HABEEB, Oluwatimilehin I. ADEBAMBO, Sunday F. OLAWALE, Evaluation of Green Architectural Strategies for Thermal Comfort in Four-Star Hotels in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Tunji J. ERINLE, Daniel C. UGURU-OKORIE, Abiodun M. ADEBIMPE, Adeolu A. ADEDIRAN, Hilary U. EZEA, A Comprehensive Review of In-Situ Monitoring and Post-Process Defect Detection in Additive Manufacturing , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Obafemi A. IBITOYE, Jemimah O. TOLU-ALALADE, Solar-Powered Low-Cost Housing: Designing Off-Grid Communities with Interlocking Stabilised Soil Blocks (ISSB) , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Shamsuddeen J. AHMAD, Saifullahi S. SADI, Muhammad M. AHMAD, Abdullahi D. UMAR, Shamsuddeen USMAN, Comparative Analysis of Machine Learning Algorithms for the Detection and Classification of Suspicious Emails , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala I. ABDULKARIM, Yusuf M. BABA, Suleiman I. ENEHE, Kamoru A. SALAM, Umar IDRISS, Synthesis of Activated Carbon from Corncob for the removal of Lead (Pb²⁺) ions from Aqueous solution using a packed bed Adsorption Column , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Haruina IBRAHIM, Abubakar M. ALI, Mohammed D. JIBRIN, Valorisation of Non-Citrus Lignocellulosic Leaf Waste for Limonene Production Using Calcium Hydroxide-Catalysed Thermal Ethanolysis , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Fatima A. MUSA, Abdulmajid B. UMAR, Abba M. BALA, A Hybrid CNN–BiGRU Model with Grey Wolf Optimization and LightGBM for Stock Price Prediction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
