Preparation and Characterization of Enhanced Hierarchical Zn-Ni/HZSM-5 Catalysts for Potential use in Catalytic reactions to Upgrade Bio-Oil and Hydrogen from Biomass Pyrolysis
- Authors
-
-
Sulaiman Y. ADAMU
Department of Chemical Engineering, Ahmadu Bello University, Zaria, Nigeria
Author
-
Fadimatu N. DABAI
Department of Chemical Engineering, University of Abuja, Abuja, Nigeria
Author
-
Abdulazeez Y. ATTA
Department of Chemical Engineering, Ahmadu Bello University, Zaria, Nigeria
Author
-
Baba Y. JIBRIL
Department of Chemical Engineering, Ahmadu Bello University, Zaria, Nigeria
Author
-
- Keywords:
- Hierarchical ZSM-5, biomass pyrolysis, bio-oil upgrading, metal-doped catalysts, desilication.
- Abstract
-
This study investigates the synthesis and characterization of hierarchical ZSM-5 and metal-doped hierarchical Zn-Ni/ZSM-5 catalysts to potentially improve the bio-oil and hydrogen production from biomass (rice husk) pyrolysis. Traditional zeolites, due to their microporous structure, often pose limitations in reactant accessibility, adversely affecting catalytic performance. To address these challenges, hierarchical zeolites incorporating mesoporosity were developed. The hierarchical ZSM-5 was synthesized via an alkaline desilication process, enhancing its mesoporous characteristics, with surface area increasing from 111 m²/g to 141 m²/g and average pore size expanding from 2 nm to 5 nm. Characterization techniques, including X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR), confirmed the retention of the MFI-type zeolite framework post-modification. The findings indicate that the hierarchical structure has the potential to enhance mass transfer and reactant accessibility, making these catalysts promising candidates for the reforming of biomass pyrolysis products, which can lead to sustainable bio-oil and hydrogen production. This research provides a foundation for future optimization of catalyst performance and exploration of diverse biomass feedstocks, contributing to advancements in cleaner energy technologies.
- References
- Downloads
- Published
- 15-09-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, Francis O. BOROKINNI, Friday ONUH, Tunde O. OGUNDANA, Adebayo I. OLUMOROTI, Developments and Applications of Additive Manufacturing in the Automotive Industry , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Nafisa A. ABDULHAMID, Danladi D. USMAN, Kabiru I. JAHUN, Rotkangmwa J. SATI, Yahaya U. JAURO, Abdulmajid M. HASHIR, Yusuf G. SHIMBURA, Development of a Solar Dryer with Multi-Products and a Residual Moisture Control System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adegboyega L. ALUKO, Ayodeji T. BALOGUN, Environmental Impact of Gold Mining Activities and Sustainable Mitigation Approaches: Case Study of Ilesa Surrounding areas, Osun State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- George AKWEC, Segun E. ADEBAYO, Caroline O. ALENOGHENA, Design and Construction of Forced-Air Heating systems for Poultry Brooding: A Comprehensive Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Tunji J. ERINLE, Daniel C. UGURU-OKORIE, Abiodun M. ADEBIMPE, Adeolu A. ADEDIRAN, Hilary U. EZEA, A Comprehensive Review of In-Situ Monitoring and Post-Process Defect Detection in Additive Manufacturing , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Cletus C. OPUTE, Obumneme O. OKWONNA, Comparative Analysis on the Efficiencies of Unmodified Clay and Microorganism-Modified Clay as Adsorbent for the Adsorption of Lead (II) Ions from Wastewater , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Babagoni A. ADAM, Muhammad B. MAINA, Muhammad SHUWA, Abba B. MUHAMMAD, A Review on Neem Leaves Valorization Through Advanced Briquetting and Carbonization Technologies , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Miracle A. OLAITAN, Musa SURAJUDEEN, Adeniyi G. ADEOGUN, Ecological and Public Health Implications of Dumpsite Leachate: Bio-Monitoring of Aquatic Organisms and Community Perceptions in Offa Garage Axis, Ilorin, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Usman GARBA, Abdullahi ADAMU, Mamuda MUHAMMAD, Physicochemical Characterisation of Mineral Sands from Northwestern Nigeria for Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Benjamin T. ABUR, Abubakar A. WARA, David ISAH, Mary D. IGBUR, Catherine N. KWAGHMANDE, Co-Gasification of Sugarcane Bagasse and Coal: A Study on Thermal Characteristics and Efficiency , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Ojochide P. DAMIAN, Fadimatu N. DABAI, Abdulwasiu ABDURRAHMAN, Kamiludeen OLANREWAJU, Bilyamin ABDULMUMIN, Grace A. OLUGBENGA, A Simulation-Driven Strategy for Improved Expandable Polystyrene Synthesis via Multi-Stage Initiator Dosing , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
