Co-Gasification of Sugarcane Bagasse and Coal: A Study on Thermal Characteristics and Efficiency
- Authors
-
-
Benjamin T. ABUR
Department of Mechanical/Production Engineering, Abubakar Tafawa Balewa University, Bauchi, Nigeria
Author
-
Abubakar A. WARA
National Board for Technology Incubation (NBTI), Abuja, Nigeria
Author
-
David ISAH
Grand Cereals Limited, Subsidiary of UACN PLC, Bukuru, Jos, Nigeria
Author
-
Mary D. IGBUR
Technical and Vocational Skills Training development (TVSTD), Industrial Training Fund Headquarters, Jos, Nigeria
Author
-
Catherine N. KWAGHMANDE
Benue State University, Makurdi, Benue State, Nigeria
Author
-
- Keywords:
- Co-gasification, sugarcane bagasse, coal, thermal characteristics.
- Abstract
-
Biomass fuels offers sustainable alternative to traditional energy sources, mitigating pollution and landfill disposal challenges. This work aim at identifying an optimal blend for enhancing gasification efficiency, operational stability and reduced emissions. Ultimate analysis was adopted for elemental composition determination, proximate analysis for physical and chemical properties while the energy content was determined through calorimetry and thermal degradation behavior using the thermo-gravimetric analysis. Elemental analysis of coal, sugar cane bagasse and their blends revealed principal chemical constituents of carbon, hydrogen and oxygen, with coal demonstrating higher carbon content. Nitrogen composition is negligible for pure and blended samples. Results indicate that coal provide more energy than bagasse owing to its lower ash content and higher carbon concentration. Conversely, calorific value of blends increased with proportion of bagasse, likely due to its high reactivity, which catalyzes coal combustion. Thermo-gravimetric analysis (TGA) displays maximum de-volatilization at 900°C, with rapid weight loss between 300-550 °C for all blends. Derivative (DTG) profiles of blends exhibit two peaks: first peak at 320-350°C, with second peak at 400-800°C representing sub-bituminous coal de-volatilization. This study concludes that blending 10% coal with 90% sugarcane bagasse optimize calorific values, thermal stability, efficiency and minimizes environmental pollution.
- References
- Downloads
- Published
- 08-08-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Bala I. ABDULKARIM, Umar IDRISS, Synthesis and Characterization of Laggera aurita-Derived KOH Activated Carbon (LAKOHAC) and Role for the Adsorption of Water-Soluble Fraction of Benzene (WSFB) in Oil-Spilled Water , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sulaiman Y. ADAMU, Fadimatu N. DABAI, Abdulazeez Y. ATTA, Baba Y. JIBRIL, Preparation and Characterization of Enhanced Hierarchical Zn-Ni/HZSM-5 Catalysts for Potential use in Catalytic reactions to Upgrade Bio-Oil and Hydrogen from Biomass Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Miracle A. OLAITAN, Musa SURAJUDEEN, Adeniyi G. ADEOGUN, Ecological and Public Health Implications of Dumpsite Leachate: Bio-Monitoring of Aquatic Organisms and Community Perceptions in Offa Garage Axis, Ilorin, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ayodele S. OLUWOLE, Olumayowa A. OJO, Olaitan AKINSANMI, Model Selection for Path Loss Prediction of Ultra High Frequency Terrestrial Television , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Sarafa ISHOLA, Olusegun S. OLAOYE, Adeyinka A. ADEGBOLA, Isaac A. OLUREMI, Oluseye O. AGBEDE, Drying Kinetics and Combustion Characteristics of Carbonized Cashew Nut Shell Briquettes Under Open Sun, Passive and Active Solar Drying , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Omokhafe J. TOLA, Garba AMBAFI, Emmanuel C. OBUAH, Isah N. ABUBAKAR, Mutiat S. YISA, Development of Energy-Aware Hamiltonian-Based Fixed-Time Chaos Control and Synchronisation of Brushless DC Motor for Electric Vehicle Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Zakariah A. ADEJOH, Hawawu SALAMI, Abdullahi M. EVUTI, Yahaya S. MOHAMMAD, Yakubu STEPHEN, Effect of Activation Time on Physicochemical Properties of Activated Carbon Prepared from Coconut Shell , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Enakhe P. OTSUPIUS, Nihad ACHEKUOGENE, Influence of Additive Manufacturing Process on the Fatigue of Polymer Materials: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Bala ABDULLAHI, Bala G. ABDURRAHMAN, Yusuf ALHASAN, Saidu B. ABUBAKAR, Bashir I. KUNYA, Raya K. ALDADAH, Saad MAHMOUD, Ahmed REZK, Effects of Truncating the Height of Compound Parabolic Collector on its Geometry, Optical and Thermal Performances , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
