Plastic Waste Challenges in Nigeria: A Review on Pollution, Sorting, and Recycling Approaches
- Authors
-
-
Chioma I. MADUEKE
Author
-
Audu YEMI
Author
-
Joseph M. ABIDEMI
Author
-
Eberechukwu C. DIM
Author
-
- Keywords:
- Plastic waste, recycling, environment, pollution, Nigeria.
- Abstract
-
Plastic waste has become one of the most persistent environmental challenges in Nigeria, rather driven by continuous growth in population, urbanization, industrialization, increasing consumption of packaged goods, and inadequate waste-management infrastructure The widespread use of plastics has become an integral part of modern life, with applications spanning household products, packaging materials, electrical and electronic appliances, structural components, medical devices, and advanced scientific equipment. In Nigeria, plastic consumption has increased substantially without a corresponding improvement in the collection, treatment, and disposal of the resulting waste. The problem is particularly pronounced in major commercial centers such as Lagos, Kano, Port Harcourt, Aba in Abia State, Onitsha in Anambra State, and other densely populated commercial areas across the country. Common plastic wastes include polyethylene bags, polyethylene terephthalate (PET) bottles, high-density polyethylene (HDPE) sachets used for packaged water, polystyrene disposable food containers and cutlery, polypropylene products such as broken chairs, low-density polyethylene (LDPE) shrink wraps, and numerous other materials belonging to the polymer family. The indiscriminate disposal of these materials has created serious environmental challenges in many communities. Plastic waste often accumulates in streets and drainage channels, obstructing water flow and providing suitable breeding grounds for mosquitoes, thereby contributing to environmental and public-health concerns. This article examines the environmental and ecological hazards associated with plastic waste and reviews both immediate and long-term strategies for reducing plastic pollution, highlighting sustainable approaches for improving waste management, safeguarding the environment, and protecting the lives of plants and animals. This review is more of a narrative review than other types, as this work mostly dwells on discussions on plastic pollution, sources, sorting, recycling, environmental impacts, economic value and recycling approaches by selecting relevant studies and discussing them systematically with findings synthesized qualitatively and research gaps highlighted.
- References
- Downloads
- Published
- 11-10-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Chioma I. MADUEKE, Audu YEMI, Joseph M. ABIDEMI, Eberechukwu C. DIM (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Tahiru MOHAMMED, Muhammad B. MAINA, Abba B. MUHAMMAD, Muhammad SHUWA, From Local Sand to Functional Silicon: An Integrated Pathway for Producing Photovoltaic-Grade Material from Nigerian Silica Sand , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abubakar S. MOHAMMED, Mohammed ALIYU, Mohammed U. GARBA, Ibrahim S. MOHAMMED, Ibrahim A. KUTI, Meshack S. IMOLOGIE, Umaru MUSA, Olalekan D. ADENIYI, Peter A. ADEOYE, Abubakar G. ISAH, Folarin T. OLORUNMOTITO, Development and Packaging of Eco-friendly Biosolid Briquettes Synthesised with Bagasse for Green Energy Generation and Utilisation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad B. MUHAMMAD, Muhammad Y. ABDULLAHI, Aminu BALA, Optimal Reduction of Technical Power Losses in Radial Distribution Networks Using Differential Evolution for Distributed Generation: A Case Study of the Azare Substation in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yahaya U. JAURO, Danladi D. USMAN, Lawan G. ABUBAKAR, Yusuf G. SHIMBURA, Aminu MOHAMMED, Design and Fabrication of Tapered Screw Briquetting Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Vandi JUSU, Eugene O. AGBACHI, Jibril A. BALA, Empirical Load Profiling and Categorisation for a Hybrid Renewable Microgrid Serving an Integrated Farm in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Idris M. WADA, Abba IBRAHIM, Genesis ISHAYA, Performance Evaluation of Climate Products with Validation Using Bootstrapping and Climate Extremes in the Hadejia-Jama’are River Basin, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Yusuf L. SHUAIB-BABATA, Kabiru S. AJAO, Yusuf O. BUSARI, Ibrahim O. AMBALI, Kehinde O. ARUNA, Henrietta O. COKER, Toheeb A. NURUDEEN, Evaluation of UNILORIN Dam Moulding Sand Properties for Foundry Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mathew O. ADEOTI, Victor N. HARUNA, Omolayo M. IKUMAPAYI, Timothy A. ADEKANYE, Development and Characterization of Epoxy-Based Asbestos-Free Brake Pad Composites Reinforced with Cow Hoof Particulates , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Joseph A. OJENIYI, Zainab L. BELLO, Ismail IDRIS, Noel M. DOGONYARO, Suleiman AHMAD, Sikiru O. SUBAIRU, Entropy-Based Deep Learning Framework for Classifying Ransomware Families in Windows Environment , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Obafemi A. IBITOYE, Jemimah O. TOLU-ALALADE, Solar-Powered Low-Cost Housing: Designing Off-Grid Communities with Interlocking Stabilised Soil Blocks (ISSB) , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Chioma I. MADUEKE, Reginald UMUNAKWE, Oluwole D. ADIGUN, An Evaluation of the Porosity and Pore Volume Fractions of Coir Fibres in Relation to Their Diameters and Tensile Properties at a Crosshead Displacement Rate of 0.5 mm/Minute for Composite Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
