Development of Coconut Shell Hydrochar for Lead Removal from Pharmaceutical Wastewater
- Authors
-
-
Adegoke P. ADEBOLA
Author
-
Abubakar S. MOHAMMED
Author
-
Umaru MUSA
Author
-
Abubakar A. IBRAHIM
Author
-
Abubakar G. ISAH
Author
-
Mohammed U. GARBA
Author
-
- Keywords:
- Coconut shell hydrochar; Hydrothermal carbonization; Pb²⁺ adsorption; Pharmaceutical wastewater; Heavy-metal removal.
- Abstract
-
Lead (Pb²⁺) contamination of wastewater requires effective, low-cost, and sustainable treatment materials. This study investigated coconut shell hydrochar produced by hydrothermal carbonization (HTC) for Pb²⁺ removal from aqueous solution and pharmaceutical wastewater. Coconut shells were converted to hydrochar at 200, 220, and 240 °C and characterized using proximate, Fourier transform infrared spectroscopy – FTIR, ultimate analysis and BET surface area. The hydrochar produced at 240 °C exhibited a specific surface area of 560.45 m²/g and was selected for adsorption experiments. Batch adsorption studies evaluated the effects of pH, contact time, dosage concentration, temperature, and initial Pb²⁺ concentration. Adsorption equilibrium, kinetics, and thermodynamics were assessed using Langmuir, Freundlich, pseudo-first-order, pseudo-second-order, and intraparticle diffusion models. Pb²⁺ removal increased if contact time and adsorbent dosage increases reaching 99.19% at 120 min and 99.46% at 2.0 g/L, respectively. Increasing initial Pb²⁺ concentration increased adsorption capacity from 0.01665 to 0.180 mg/g but reduced percentage removal. The Freundlich model provided the best equilibrium fit (R² = 0.9996), while the Langmuir model gave R² = 0.9374 and a maximum adsorption capacity of 0.2502 mg/g. The pseudo-second-order model best fit the adsorption kinetics (R² = 0.955). Thermodynamic analysis indicated spontaneous and endothermic adsorption, with negative ΔG values (−0.708 to −2.443 kJ/mol), ΔH of 25.15 kJ/mol, and ΔS of 86.72 J/mol·K. Overall, coconut shell hydrochar showed promising potential for sustainable Pb²⁺ removal from wastewater.
- References
- Downloads
- Published
- 09-10-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Adegoke P. ADEBOLA, Abubakar S. MOHAMMED, Umaru MUSA, Abubakar A. IBRAHIM, Abubakar G. ISAH, Mohammed U. GARBA (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, Francis O. BOROKINNI, Friday ONUH, Tunde O. OGUNDANA, Adebayo I. OLUMOROTI, Developments and Applications of Additive Manufacturing in the Automotive Industry , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abdulkarim AMINU, Mohammed ALIYU, Ibrahim S. MOHAMMED, Iyanda M. ANIMASHAUN, Peter DANIEL, Mohammad USMAN, Production and Optimisation of Parameters for Density and Ash Content of Briquettes Produced from Sorghum Stalks and Groundnut Shells Using African Locust Bean (Parkia biglobosa) Pulp as a Binding Agent , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Nafisa A. ABDULHAMID, Danladi D. USMAN, Kabiru I. JAHUN, Rotkangmwa J. SATI, Yahaya U. JAURO, Abdulmajid M. HASHIR, Yusuf G. SHIMBURA, Development of a Solar Dryer with Multi-Products and a Residual Moisture Control System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Tunji J. ERINLE, Daniel C. UGURU-OKORIE, Abiodun M. ADEBIMPE, Adeolu A. ADEDIRAN, Hilary U. EZEA, A Comprehensive Review of In-Situ Monitoring and Post-Process Defect Detection in Additive Manufacturing , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yusuf L. SHUAIB-BABATA, Kabiru S. AJAO, Yusuf O. BUSARI, Ibrahim O. AMBALI, Toheeb A. NURUDEEN, John A. OKOLO, Gabriel A. LONGE, Inhibitory Potential of Blended Parkia biglobosa and Delonix regia Extracts on Corrosion of AISI 1007 Steel in 1.0 M Hydrochloric Acid Medium , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Zaharaddeen MUSA, Aliyu BELLO, Haris A. DANLADI, Design and Construction of Dual Input Mobile Solar Generator for Reliable Off-Grid Power , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Usman HASSAN, An Assessment of Management Support Provided to Construction Equipment Operators Regarding Safety Practices and Protocols in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Olatunde A. AKANO, Wariz A. ISMAEL, Ayomikun A. AWOSEYI, Femi AYO, Ifeoluwa M. OLANIYI, Jide E.T. AKINSOLA, Short Messaging Service Spam Detection Model Using Natural Language Processing and Deep Learning Techniques , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Peter EDOKA, Assessment of the Role of Kogi State Government in Flood Mitigation in Lokoja, Kogi State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ojo I. ENOCK, Ibrahim A. SAIDU, Ibrahim SULAIMAN, Oluwafeyisikemi. Y. ENOC, Design and Development of a Melon Shelling Machine , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Iyanda M. ANIMASHAUN, Abubakar S. MOHAMMED, Ibrahim A. KUTI, Peter A. OBASA, Rashidat ANIYIKAYE, Yahaya MOHAMMED, Yusuf M. OTACHE, Artificial Intelligence of Things (AIoT) for Precision Irrigation: A Comprehensive Review of Applications, Challenges, and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Muhammad N. IBRAHIM, Abubakar S. MOHAMMED, Iyanda M. ANIMASHAUN, Shehu ABDULKADIR, Sensor-Based Real-Time Soil Macronutrient Monitoring and Variable-Rate Fertilizer Application Machinery , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
