Development of Coconut Shell Hydrochar for Lead Removal from Pharmaceutical Wastewater
- Authors
-
-
Adegoke P. ADEBOLA
Author
-
Abubakar S. MOHAMMED
Author
-
Umaru MUSA
Author
-
Abubakar A. IBRAHIM
Author
-
Abubakar G. ISAH
Author
-
Mohammed U. GARBA
Author
-
- Keywords:
- Coconut shell hydrochar; Hydrothermal carbonization; Pb²⁺ adsorption; Pharmaceutical wastewater; Heavy-metal removal.
- Abstract
-
Lead (Pb²⁺) contamination of wastewater requires effective, low-cost, and sustainable treatment materials. This study investigated coconut shell hydrochar produced by hydrothermal carbonization (HTC) for Pb²⁺ removal from aqueous solution and pharmaceutical wastewater. Coconut shells were converted to hydrochar at 200, 220, and 240 °C and characterized using proximate, Fourier transform infrared spectroscopy – FTIR, ultimate analysis and BET surface area. The hydrochar produced at 240 °C exhibited a specific surface area of 560.45 m²/g and was selected for adsorption experiments. Batch adsorption studies evaluated the effects of pH, contact time, dosage concentration, temperature, and initial Pb²⁺ concentration. Adsorption equilibrium, kinetics, and thermodynamics were assessed using Langmuir, Freundlich, pseudo-first-order, pseudo-second-order, and intraparticle diffusion models. Pb²⁺ removal increased if contact time and adsorbent dosage increases reaching 99.19% at 120 min and 99.46% at 2.0 g/L, respectively. Increasing initial Pb²⁺ concentration increased adsorption capacity from 0.01665 to 0.180 mg/g but reduced percentage removal. The Freundlich model provided the best equilibrium fit (R² = 0.9996), while the Langmuir model gave R² = 0.9374 and a maximum adsorption capacity of 0.2502 mg/g. The pseudo-second-order model best fit the adsorption kinetics (R² = 0.955). Thermodynamic analysis indicated spontaneous and endothermic adsorption, with negative ΔG values (−0.708 to −2.443 kJ/mol), ΔH of 25.15 kJ/mol, and ΔS of 86.72 J/mol·K. Overall, coconut shell hydrochar showed promising potential for sustainable Pb²⁺ removal from wastewater.
- References
- Downloads
- Published
- 09-10-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Adegoke P. ADEBOLA, Abubakar S. MOHAMMED, Umaru MUSA, Abubakar A. IBRAHIM, Abubakar G. ISAH, Mohammed U. GARBA (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Babagoni A. ADAM, Muhammad B. MAINA, Muhammad SHUWA, Abba B. MUHAMMAD, A Review on Neem Leaves Valorization Through Advanced Briquetting and Carbonization Technologies , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Bala I. ABDULKARIM, Umar IDRISS, Synthesis and Characterization of Laggera aurita-Derived KOH Activated Carbon (LAKOHAC) and Role for the Adsorption of Water-Soluble Fraction of Benzene (WSFB) in Oil-Spilled Water , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mu’azu ABUBAKAR, Abubakar B. ALIYU, Dauda GARBA, Fabrication, Characterization, and Application of Clay-Based Ceramic Membranes for Oily Wastewater Treatment: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Usman GARBA, Abdullahi ADAMU, Mamuda MUHAMMAD, Physicochemical Characterisation of Mineral Sands from Northwestern Nigeria for Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Joseph K. ZAMBWA, Jibril M. KAURA, Ocholi AMANA, Abdrasheed S. ABDURASHEED, Ejembi WILLIAMA, Evaluation of Materials and Performance Characteristics of Tannery Sludge Crumb Rubber Concrete (TSCRC) , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Raphina O. UBAH, Oluwaseun S. OGUNGBEMI, Olabode O. OLUTOMILOLA, Impact of Open Dumpsites on Groundwater Quality: Geophysical and Hydrochemical Evidence from Ijan-Ekiti, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ahmad IDRIS, Evaluation of Challawa Tannery Wastewater as Mixing and Curing Water for Concrete Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Mukhtar N. YAHYA, Sohaib ALHAJHUSSEIN, Wastewater Analysis Using Kubota Membrane Bioreactor System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Murtala NAMAKKA, Abdulhamid S. ILIYASU, Utilisation of Supercritical Critical Fluids in Adsorption Process: A Comprehensive Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ferguson H. TOBINS, Ishiaka S. ARUDI, Abdulhakeem H. NURUDEEN, Snail Shell-Clay Ceramic Composites as Sustainable Raw Materials for High-Voltage Insulators , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Iyanda M. ANIMASHAUN, Abubakar S. MOHAMMED, Ibrahim A. KUTI, Peter A. OBASA, Rashidat ANIYIKAYE, Yahaya MOHAMMED, Yusuf M. OTACHE, Artificial Intelligence of Things (AIoT) for Precision Irrigation: A Comprehensive Review of Applications, Challenges, and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Muhammad N. IBRAHIM, Abubakar S. MOHAMMED, Iyanda M. ANIMASHAUN, Shehu ABDULKADIR, Sensor-Based Real-Time Soil Macronutrient Monitoring and Variable-Rate Fertilizer Application Machinery , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
