Modelling and Performance Optimization of a Dual Fuel Mode Power Generation System (A Case Study of Allanblackia floribunda Seed Oil)
- Authors
-
-
Ayodeji T. BALOGUN
Author
-
Onoghwarite E. OHIMOR
Department of Chemical Engineering, Federal University of Petroleum Resources, Effurun, Delta State, Nigeria
Author
-
Adegboyega L. ALUKO
Author
-
- Keywords:
- Modelling; Optimization; Performance, Allanblackia floribunda Seed Oil.
- Abstract
-
This study focuses on the optimization of a small-scale, spark-ignition power generation system operating on a dual fuel arrangement of petrol and Liquefied Petroleum Gas (LPG) The research addresses the challenge of calibrating such systems for optimal performance, which volves balancing often conflicting objectives like fuel efficiency, power output, and emissions A Response Surface Methodology (RSM) framework, employing a Central Composite Design (CCD) of experiments, was used to investigate the effects of five key operating parameters Engine Load, Generator Speed, Ignition Timing, Air-Fuel Ratio, and Compression Ratio Empirical quadratic models were developed and validated to predict key responses Brake Thermal Efficiency (BTE), Specific Fuel Consumption (SFC), Carbon Monoxide (CO), and Nitrogen Oxides (NOx) emissions, and Power Output The Desirability Function Approach was then applied for multi-response optimization to identify the bestcompromise operating conditions for both petrol and LPG modes. The results demonstrate that while both fuels can achieve nearly identical thermal efficiency at their respective optima, LPG operation enables a 22 9% higher power output. However, this is accompanied by a 5.56% increase in mass-based fuel consumption and significant increases in CO (66.2%) and NOx (14.1%) emissions under the high-load optimization strategy The study concludes that LPG is a superior fuel for applications demanding high power density, provided that the increased emissions are managed through targeted calibration or after-treatment, the Allanblankia florrbunda Seed Oil was used as case study, thereby offering a viable path for cleaner and more powerful decentralized electricity generation.
- References
- Downloads
- Published
- 25-09-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Ayodeji T. BALOGUN, Onoghwarite E. OHIOMOR, Adegboyega L. ALUKO (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Vincent B. ONIGBARA, Sunday I. AGU, Muftau A. GBENLE, Metal-Based Biomaterials for Clinical Implant Applications: Materials and Performance – A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ayodele DANIEL, Mercy O. AKEJU, Sunday O. ISEHUNWA, Abel A. ADEYI, Adebayo T. OGUNYEMI, Decline Curve Analysis of Continuous Injection Gas Lifted Wells , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Mukhtar N. YAHYA, Sohaib ALHAJHUSSEIN, Wastewater Analysis Using Kubota Membrane Bioreactor System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Olawale J. OLALUYI, Johnson O. ADEOGO, Adeniyi O. AJIBOYE, Mayowa O. ORESELU, Olarewaju T. OGINNI, Application of Machine Learning for Enhancing Fake Logo Detection , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abba M. BALA, Abdurrauf G. SHARIFAI, Umar S. HARUNA, A Hybrid Deep Learning Model for Efficient Anomaly Detection in Video Surveillance Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ukange N. SYBIL, Hadiza A. UMAR, Ogar M. OKO, Habeebah A. KAKUDI, Usman MAHMUD, Alex AARON, Leveraging Quantum Machine Learning for Early Ovarian Cancer Diagnosis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Iliya D. IBRAHIM, Suleiman A. BABALE, Sani H. LAWAN, Auwal A. ABUBAKAR, Design of a Modified Wideband Microstrip Patch Antenna for WLAN/WiMAX Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adebola S. AKOLADE, Precious A. OLAOMOTITO, Abibat Y. ADEBIYI, Oluwatunmise P. ABOLARIN, Opeyemi I. ADETUNJI, Kola OGEDENGBE, Production and Evaluation of Cement-Bonded Composites Board Made from Banana Pseudo Stem , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Taiwo J. DURODOLA, Suleiman ZUBAIR, James AGAJO, Open Radio Access Network (ORAN) Deployment Strategies for Remote Areas , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Sheidu S. ONIMISI, Usman B. ABDULLAHI, Hayatudden S. BARAYAIS, Abubakar M. MUHAMMAD, Abubakar G. ISAH, Abubakar S. MOHAMMED, Mohammed U. GARBA, Safety Evaluation of Orifice Plate in Natural Gas Pipeline using Computer Aided Engineering (CAE): A Step Towards Food Security , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
