Smart Fence for Real-Time Farm Protection in Sub-Saharan Africa Using Artificial Intelligence: A Systematic Review and Research Roadmap
- Authors
-
-
Omokhafe J. TOLA
Author
-
James G. AMBAFI
Author
-
Umar S. DAUDA
Author
-
- Keywords:
- Initial void ratio, natural moisture content, settlement, compression ratio, one-dimensional consolidation.
- Abstract
-
Agricultural insecurity from wildlife encroachment and crop raiding threatens food production in Sub-Saharan Africa (SSA), where 60% of smallholder farmers rely on agriculture. Conventional barbed wire and electric fences are passive, static, and poorly suited for rural SSA's resource-constrained environments. This paper presents a systematic review of smart fence technologies for real-time farm protection, adhering to PRISMA 2020 guidelines. From an initial 1,247 documents across IEEE Xplore, ScienceDirect, SpringerLink, and Google Scholar, 56 peer-reviewed studies (2008–2026) were selected for synthesis following title and abstract screening, duplication, and full-text eligibility assessment. The review classifies smart fences into four categories: sensor-based, vision-based, IoT-based, and hybrid AIoT-based. Under controlled conditions, YOLOv8 models outperformed others with over 92% detection accuracy. For edge deployments, MobileNetV3 achieved 85.7% accuracy on commodity hardware, consuming only 3.1 W. Critically, the study found no smart fence deployments in the literature validated specifically for SSA, highlighting a major gap given the region's unique infrastructural challenges. Key contributions of this paper include: (i) synthesizing AI and smart fence performance benchmarks; (ii) establishing a 12-factor matrix quantifying SSA deployment constraints by severity, prevalence, and technology readiness; (iii) proposing an SSA-specific edge-AI reference architecture optimized for solar power, low connectivity, and a sub-$400 deployment cost; and (iv) outlining a structured 3-level research roadmap aligned with TRL 4-9 milestones. This review provides a solid foundation for developing cost-effective, context-aware smart fencing tailored to SSA's agricultural realities.
- References
- Downloads
- Published
- 08-09-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Omokhafe J. TOLA, James G. AMBAFI, Umar S. DAUDA (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Emmanuel O. AGBENYI, Adefope OWOJORI, Oluwadare J. AKINDUGBAGBE, Babatunde ADEBO, Chigbo I. OKEREKE, Impact Assessment of Natural Radionuclides in Cassava Tubbers Harvested from a Farmlands Around Quarry in Moniya Ibadan, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Adefemi O. ADEODU, Banjo C. ADEDOKUN, Amos A. ADEGBITE, Development and Performance Evaluation of an Injection Moulding Machine for Recycled Polymer Composite Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Dauda ALI, Auwal SHUAIBU, Design and Performance Evaluation of Plastic–Sand Interlocking Blocks Using Waste Polyethylene Terephthalate (PET) and Low-Density Polyethylene (LDPE) for Sustainable Construction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Hammed A. OLASUNKANMI, Olumuyiwa I. ADENIJI, Mufutau K. LAWAL, Babatola E. OJO, Babayemi D. OMOWOLE, Somtochukwu E. AVAH, Isiaka A. ADELEKE, Kudirat N. POPOOLA, Ademidun E. IBITOYE, Design and Implementation of a Secure AI-Based Product Showcase and Customer Support System for Small and Medium-Sized Enterprises , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Oyeyemi T. AFOROLAGBA-BALOGUN, Olumide A. TOWOJU, Characterization of Fuel Produced from Nylon (Polyamide) and Polyethylene Terephthalate (PET) Wastes with Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Gbenga G. OSEKE, Chisom S. AMADI, Abubakar U. RAJI, Hydrogen Production from Flare Gas via Steam Methane Reforming: A Simulation-Based Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Sheidu S. ONIMISI, Usman B. ABDULLAHI, Hayatudden S. BARAYAIS, Abubakar M. MUHAMMAD, Abubakar G. ISAH, Abubakar S. MOHAMMED, Mohammed U. GARBA, Safety Evaluation of Orifice Plate in Natural Gas Pipeline using Computer Aided Engineering (CAE): A Step Towards Food Security , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Amina UTHMAN, Shamsuddeen SULAIMAN, Evaluation of Cost Factors Influencing the Adoption of Sustainable Construction Practices in Abuja, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Iyanda M. ANIMASHAUN, Abubakar S. MOHAMMED, Ibrahim A. KUTI, Peter A. OBASA, Rashidat ANIYIKAYE, Yahaya MOHAMMED, Yusuf M. OTACHE, Artificial Intelligence of Things (AIoT) for Precision Irrigation: A Comprehensive Review of Applications, Challenges, and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Muyideen O. MOMOH, Emmanuel I. AWODE, Gowon SULE, Umar ABUBAKAR, Ikechukwu O. ALUM, Usman K. AMINU, Bio-Inspired Flight Mechanisms for Unmanned Aerial Vehicles: An Overview , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Omokhafe J. TOLA, Garba AMBAFI, Emmanuel C. OBUAH, Isah N. ABUBAKAR, Mutiat S. YISA, Development of Energy-Aware Hamiltonian-Based Fixed-Time Chaos Control and Synchronisation of Brushless DC Motor for Electric Vehicle Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
