Effects of Fire-Retardant Treatment, Fire Scenarios, and Face Orientation on the Charring Behaviour of Indigenous Timber Species
- Authors
-
-
Ozovehe A. ALIYU
Author
-
Tasiu A. SULAIMAN
Author
-
Jibrin M. KAURA
Author
-
Idris ABUBAKAR
Author
-
Amana OCHOLI
Author
-
- Keywords:
- Charring Behaviour, Face Orientation, Fire-Retardant Treatment, Indigenous Timber, Parametric Fire.
- Abstract
-
The increasing use of timber as a sustainable construction material has heightened the need for improved understanding of its behaviour under fire exposure, particularly for indigenous timber species whose fire performance data remain limited. This study investigates the effects of fire-retardant treatment, fire scenarios, and face orientation on the charring behaviour of selected indigenous Nigerian timber species, namely Erythrophleum suaveolens and Anogeissus leiocarpa. Timber specimens were subjected to three fire exposure scenarios: FT-I, representing the ISO 834 standard fire; FT-II, representing a long-cool parametric fire; and FT-III, representing a short-hot parametric fire. Treated and untreated specimens were exposed under different face orientations, and char depth and charring rate were determined at predetermined exposure intervals. The results showed that charring rate varied with timber species, treatment condition, and fire scenario. Erythrophleum suaveolens consistently recorded lower charring rates than Anogeissus leiocarpa under all investigated conditions. Under FT-I, untreated E. suaveolens and A. leiocarpa recorded mean charring rates of 0.5196 and 0.7160 mm/min, respectively, which decreased to 0.4270 and 0.5782 mm/min after treatment. The highest charring rates occurred under FT-III, while treatment reduced charring rates by 12.21–25.51% across the investigated species and fire scenarios. Face orientation also influenced charring behaviour, with end-grain surfaces showing greater susceptibility to charring than side surfaces. Char depth increased progressively with fire exposure time, while treated specimens exhibited slower char development. Statistical analysis indicated that lognormal, Weibull, and normal distributions provided adequate descriptions of the observed charring rates. The findings demonstrate the potential of the fire-retardant treatment for reducing charring and provide useful experimental data for improving fire protection and fire-safe design of indigenous timber structures.
- References
- Downloads
- Published
- 08-09-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Ozovehe A. ALIYU, Tasiu A. SULAIMAN, Jibrin M. KAURA, Idris ABUBAKAR, Amana OCHOLI (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Ahmad ADO, Abdullahi YAHAYA, Abubakar J. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF, Kinetic Study of 4-Nitrophenol Sonocatalytic Degradation , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Omokhafe J. TOLA, Garba AMBAFI, Emmanuel C. OBUAH, Isah N. ABUBAKAR, Mutiat S. YISA, Development of Energy-Aware Hamiltonian-Based Fixed-Time Chaos Control and Synchronisation of Brushless DC Motor for Electric Vehicle Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Tahiru MOHAMMED, Muhammad B. MAINA, Abba B. MUHAMMAD, Muhammad SHUWA, From Local Sand to Functional Silicon: An Integrated Pathway for Producing Photovoltaic-Grade Material from Nigerian Silica Sand , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Hyelni G. MSHELIA, Abdulfatai JIMOH, Mohammed A. EVUTI, Abubakar A. IBRAHIM, Abdulwahab GIWA, Adeola G. OLUGBENGA, Potential of Onion Skin, Luffa cylindrica, and Corn Cob as Cellulose Sources: A Study of Their Proximate, Ultimate, and Morphological Properties , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abba M. BALA, Abdurrauf G. SHARIFAI, Umar S. HARUNA, A Hybrid Deep Learning Model for Efficient Anomaly Detection in Video Surveillance Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Bala ABDULLAHI, Bala G. ABDURRAHMAN, Yusuf ALHASAN, Saidu B. ABUBAKAR, Bashir I. KUNYA, Raya K. ALDADAH, Saad MAHMOUD, Ahmed REZK, Effects of Truncating the Height of Compound Parabolic Collector on its Geometry, Optical and Thermal Performances , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Murtala NAMAKKA, Abdulhamid S. ILIYASU, Utilisation of Supercritical Critical Fluids in Adsorption Process: A Comprehensive Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Multi-Criteria Decision Analysis and Optimization Approaches in Sustainable Waste-to-Energy Planning: A Systematic Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Enakhe P. OTSUPIUS, Nihad ACHEKUOGENE, Influence of Additive Manufacturing Process on the Fatigue of Polymer Materials: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Bosede A. ORHEVBA, Sodeeq A. OLAJIDE, Optimization of Alkaline Pretreatment and Fermentation Conditions for Improved Physicochemical Properties and Yield of Bioethanol Produced from Sugarcane Bagasse , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
You may also start an advanced similarity search for this article.
