Development of an IoT-Based Smart Distribution Transformer Monitoring System for Reliable Rural Electrification
- Authors
-
-
Olalekan OGUNBIYI
Author
-
Lambe M. ADESINA
Author
-
Ibrahim Z. ARIYO
Author
-
- Keywords:
- Condition monitoring, Distribution transformer, Internet of Things (IoT), Remote monitoring, Rural electrification.
- Abstract
-
Distribution transformers are essential components of electric power distribution networks, and their reliable operation depends on continuous monitoring of critical operating parameters. However, conventional inspection techniques are periodic, labour-intensive, and incapable of providing the real-time information required for proactive maintenance. This study presents the design, implementation, and experimental validation of an Internet of Things (IoT)-based smart distribution transformer monitoring system for real-time acquisition and remote visualisation of transformer operating parameters. The developed system integrates isolated voltage and current sensing circuits, an Arduino Uno microcontroller, an ESP8266 Wi-Fi communication module, a 16 × 2 liquid crystal display (LCD), and the Blynk cloud platform for simultaneous local and remote monitoring. The sensing circuits were calibrated using polynomial and exponential regression models to improve measurement accuracy, while the complete hardware was designed, simulated, and verified using the PROTEUS Design Suite before fabrication. Experimental evaluation was conducted over a voltage range of 181–249 V and load currents up to 9 A. The developed system exhibited excellent agreement with calibrated reference instruments, recording a maximum voltage deviation of approximately 1 V (less than 0.5%) and a maximum current deviation of 0.1 A (approximately 1.1%). In addition, the estimated apparent power, real power, and power factor closely matched the reference values. The communication subsystem maintained stable Wi-Fi connectivity, achieving a data transmission success rate exceeding 99% with dashboard refresh times below 2.1 s, thereby enabling reliable real-time cloud monitoring. The proposed monitoring system provides a low-cost, accurate, and scalable solution for continuous condition monitoring of distribution transformers and offers significant potential for predictive maintenance and intelligent asset management in modern smart grid applications.
- References
- Downloads
- Published
- 07-09-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Olalekan OGUNBIYI, Lambe M. ADESINA, Ibrahim Z. ARIYO (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Taiwo J. DURODOLA, Suleiman ZUBAIR, James AGAJO, Open Radio Access Network (ORAN) Deployment Strategies for Remote Areas , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Tina I. FRANCIS-AKILAKI, Onimi O. ASHAMA, Raymond A. EKEMUBE, Vibration Analysis as a Transformative Approach to Condition-Based Monitoring , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mela I. L. LASHIRU, Ganiyu A. BAKARE, Sabo M. HASSAN, Kamilu O. LAWAL, Data-Driven Observability Enhancement in Active Distribution Networks via Optimal Co-Deployment of DGs and D-PMUs Using Hybrid APSO-ASDA , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Suleiman ZUBAIR, Hassan T. ABDULAZEEZ, Bala A. SALIHU, Gambo MOHAMMED, A Low-Cost, Offline-Capable Wireless Soil Moisture Monitoring System for Smallholder Farmers: Design, Validation, and Agronomic Impact , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ibrahim M. GANA, Abdullahi YUSUF, Agidi GBABO, Micheal EPHRAIM, Abubakar M. HASSAN, Development and Testing of an Automated Solar-Powered Nutrient Film Technique (NFT) Hydroponic Planting System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Dandison M. WALI, Beabu B. DUMKHANA, Raymond A. EKEMUBE, Silas O. NKAKINI, Smart Assessment of Tractor Noise Levels During Tillage Operation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala YAHAYA, Characterization of Soil Quality Parameters in Sector 2 of Watari Irrigation Project, Kano , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Nuhu MOHAMMED, Garkuwa Y. ADAMU, Abubakar A. FACHWAY, Aminu MOHAMMED, Afolayan A. OLASUNKANMI, Odoh F. CHIMEZIE, Muhammad A. YUSUF, Development of A Water-Recycling Pico Hydropower System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Jafaru A. MOHAMMED, Thomas N. GUMA, Malachy SUMAILA, Mahdi MAKWAYO, A Review of Local Manufacturing of Borehole Windmill Gear Trains Using Reverse Engineering and Integrated Braking Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Hafsa K. AHMAD, Graph-Augmented Transformers for Hausa Sentiment Analysis: When Does Graph Structure Help? , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
