A Review on Solar Water Heating System in Nigeria
- Authors
-
-
Abdulyakin USMAN
Author
-
Ibrahim A. RUFAI
Author
-
Dalhatu B. YAHAYA
Author
-
- Keywords:
- Active, Passive, Prospects, Solar Energy, Solar Water Heater, Water Heating System.
- Abstract
-
The most widely used solar thermal technologies in West Africa are solar water heating systems; nevertheless, the adoption of these systems has been slower than expected. This review introduced the three technical methods upon which solar energy can be harnessed, and the solar water heating process falls under the thermal method. The working principle of the solar water heating system was explained to involve gathering heat in a solar collector; transfer the heat to the water supply; and store the heated water until it is used. Solar water heaters were then classified based on method of flow circulation and the type of solar collector. The components of the system for heat collection, heat storage, heat delivery and freeze protection were also introduced. Concept of Modelling and Simulation of solar Water Heating System as well as prospect of the system in family homes, clinics, and other settings reported from literature were included in the review. The review after highlighting the prospects of system however identified some areas that were not resolved in the existing literature to include: hybridizing solar water heater with incinerator water heater, optimizing the performance of the hybrid system using computational fluid dynamics techniques, as well as the sustainability evaluation for the deployment of the system in Clinics and other settings.
- References
- Downloads
- Published
- 01-09-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Abdulyakin USMAN, Ibrahim A. RUFAI, Dalhatu B. YAHAYA (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Oyeyemi T. AFOROLAGBA-BALOGUN, Olumide A. TOWOJU, Characterization of Fuel Produced from Nylon (Polyamide) and Polyethylene Terephthalate (PET) Wastes with Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Murtala ISMAIL, Mohammed S. ISMAIL, Eli A. JIYA, Machine Learning-Driven Recruitment Recommendation System for Employment in Nigerian Universities , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Nnamdi S. OKOMBA, Adedayo A. SOBOWALE, Adebimpe O. ESAN, Bolaji A. OMODUNBI, Taiwo A. AWOYEMI, Development of an Intelligent-Based Elevator System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Gbenga G. OSEKE, Chisom S. AMADI, Abubakar U. RAJI, Hydrogen Production from Flare Gas via Steam Methane Reforming: A Simulation-Based Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Abdulrasheed MUSTAPHA, Kolawole O. MORAKINYO, Seyi O. FARODOYE, Rilwan B. HABEEB, Oluwatimilehin I. ADEBAMBO, Sunday F. OLAWALE, Evaluation of Green Architectural Strategies for Thermal Comfort in Four-Star Hotels in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Damilare L. ADEKEYE, Isiyaku SALEH, Yemisi E. AKINSELI, Design and Implementation of an Automatic Gate for Cars at Railway Crossings , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Danladi K. GARBA, Emmanuel O. AWEDA, Nuhu A. ADEMOH, Fredrick NGOLEMASANGO, Pascal A. UBI, Akor TERNGU, Lawal KABIR, Shuaibu O. YAKUBU, The Effects of Gum Arabic Matrix on the Hardness and Water Absorption of Agro-Based (Banana Pseudostem) Hybrid Composites , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Benedict O. EDENSETING, Innocent O. OBOH, Alexander A. JOCK, Effective Food Waste Utilization: A Veritable Source of Biofuel for Nigerian Economic Sustenance and Development - A Review , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Abdulkarim AMINU, Mohammed ALIYU, Ibrahim S. MOHAMMED, Iyanda M. ANIMASHAUN, Peter DANIEL, Mohammad USMAN, Production and Optimisation of Parameters for Density and Ash Content of Briquettes Produced from Sorghum Stalks and Groundnut Shells Using African Locust Bean (Parkia biglobosa) Pulp as a Binding Agent , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Olusiji A. ADEYANJU, Joseph O. OLAIDE, Machine Learning Models for Predicting Flow Rate for Niger Delta Oil Wells , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
