Model Selection for Path Loss Prediction of Ultra High Frequency Terrestrial Television
- Authors
-
-
Ayodele S. OLUWOLE
Author
-
Olumayowa A. OJO
Author
-
Olaitan AKINSANMI
Author
-
- Keywords:
- Model selection, path loss prediction, supervised machine learning, Random-forest, performance metrics.
- Abstract
-
Precise prediction of path loss is crucial for the reliable operation and optimal coverage of terrestrial Ultra High Frequency (UHF) television networks. Traditional models tend to have limited accuracy in complex propagation environments due to the fixed parameter assumptions and the lack of consideration of the nonlinear interactions among terrain, vegetation and antenna characteristics. This paper investigates the applicability of different machine learning models for the prediction of path loss in terrestrial UHF television networks. Received signal strength was first measured in the field at selected locations along five different routes in Ekiti State, Nigeria. The measured dataset was subsequently preprocessed and prepared for machine learning analysis. Five supervised machine learning algorithms were implemented and trained on the dataset, such as Linear Regression, K-Nearest Neighbors Regression, Random Forest Regression, Decision Tree Regression and Extra Tree Regression. Lastly, , the performance of the models was assessed using root mean square error (RMSE), mean absolute error (MAE), and coefficient of determination (R2). The results showed that KNN Regression had the lowest MAE (1.721), MSE (4.667) and RMSE (2.160) with an accuracy of 94.80%. Random Forest Regression was next with a slightly higher MAE (1.733), MSE (6.775) and RMSE (2.603), but scored the highest accuracy (94.89%) as a balanced and reliable performance overall. The results validate random forest as optimal and reliable path loss prediction model in UHF terrestrial broadcast networks. Carefully selection of machine learning models helps achieve precise estimation of path loss.
- References
- Downloads
- Published
- 21-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Ayodele S. OLUWOLE, Olumayowa A. OJO, Olaitan AKINSANMI (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Abdullahi YAHAYA, Ahmad ADO, Jaju A. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF, Kinetic Modelling of Sonocatalytic Phenol Degradation over Alumina-Supported Copper Oxide Catalyst , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Shehu ABDULKADIR, Dangora N. DAUDA, Aliyu A. ADAMU, Badaru M. SANI, Rilwan ABUBAKAR, Timothy A. TIMOTHY, Uchechukwu M. AGBOM, Abubakar S. ABUBAKAR, Development and Performance Evaluation of a Modified Active Evaporative Cooling System for Postharvest Preservation of Selected Vegetables , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Haris A. DANLADI, Umar Y. MUHAMMAD, Idris Y. IDRIS, Zaharaddeen MUSA, IoT-Based Solar-Powered Flood Early Warning System: Design and Evaluation at Alau Dam, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Sheidu S. ONIMISI, Usman B. ABDULLAHI, Hayatudden S. BARAYAIS, Abubakar M. MUHAMMAD, Abubakar G. ISAH, Abubakar S. MOHAMMED, Mohammed U. GARBA, Safety Evaluation of Orifice Plate in Natural Gas Pipeline using Computer Aided Engineering (CAE): A Step Towards Food Security , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Adegboyega L. ALUKO, Ayodeji T. BALOGUN, Environmental Impact of Gold Mining Activities and Sustainable Mitigation Approaches: Case Study of Ilesa Surrounding areas, Osun State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mu’azu ABUBAKAR, Abubakar B. ALIYU, Dauda GARBA, Fabrication, Characterization, and Application of Clay-Based Ceramic Membranes for Oily Wastewater Treatment: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Damilare L. ADEKEYE, Isiyaku SALEH, Yemisi E. AKINSELI, Design and Implementation of an Automatic Gate for Cars at Railway Crossings , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oluwadare J. AKINDUGBAGBE, Adefope OWOJORI, Emmanuel AGBENYI, Babatunde ADEBO, Gamma Shielding Capabilities of Some Selected Materials Within Ibadan Metropolis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Hammed A. OLASUNKANMI, Olumuyiwa I. ADENIJI, Mufutau K. LAWAL, Babatola E. OJO, Babayemi D. OMOWOLE, Somtochukwu E. AVAH, Isiaka A. ADELEKE, Kudirat N. POPOOLA, Ademidun E. IBITOYE, Design and Implementation of a Secure AI-Based Product Showcase and Customer Support System for Small and Medium-Sized Enterprises , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, Francis O. BOROKINNI, Friday ONUH, Tunde O. OGUNDANA, Adebayo I. OLUMOROTI, Developments and Applications of Additive Manufacturing in the Automotive Industry , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
