Model Selection for Path Loss Prediction of Ultra High Frequency Terrestrial Television
- Authors
-
-
Ayodele S. OLUWOLE
Author
-
Olumayowa A. OJO
Author
-
Olaitan AKINSANMI
Author
-
- Keywords:
- Model selection, path loss prediction, supervised machine learning, Random-forest, performance metrics.
- Abstract
-
Precise prediction of path loss is crucial for the reliable operation and optimal coverage of terrestrial Ultra High Frequency (UHF) television networks. Traditional models tend to have limited accuracy in complex propagation environments due to the fixed parameter assumptions and the lack of consideration of the nonlinear interactions among terrain, vegetation and antenna characteristics. This paper investigates the applicability of different machine learning models for the prediction of path loss in terrestrial UHF television networks. Received signal strength was first measured in the field at selected locations along five different routes in Ekiti State, Nigeria. The measured dataset was subsequently preprocessed and prepared for machine learning analysis. Five supervised machine learning algorithms were implemented and trained on the dataset, such as Linear Regression, K-Nearest Neighbors Regression, Random Forest Regression, Decision Tree Regression and Extra Tree Regression. Lastly, , the performance of the models was assessed using root mean square error (RMSE), mean absolute error (MAE), and coefficient of determination (R2). The results showed that KNN Regression had the lowest MAE (1.721), MSE (4.667) and RMSE (2.160) with an accuracy of 94.80%. Random Forest Regression was next with a slightly higher MAE (1.733), MSE (6.775) and RMSE (2.603), but scored the highest accuracy (94.89%) as a balanced and reliable performance overall. The results validate random forest as optimal and reliable path loss prediction model in UHF terrestrial broadcast networks. Carefully selection of machine learning models helps achieve precise estimation of path loss.
- References
- Downloads
- Published
- 21-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Ayodele S. OLUWOLE, Olumayowa A. OJO, Olaitan AKINSANMI (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- James AUDU, Abdulraman A. SALAWU, Muriana R. AREMU, Abdullahi A. ALHAJI, Lawal S. SIUS, Characterisation of Pumice-Kaolin Refractory Bricks for High Temperature Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Sani MAMOUDOU, Abdulmumin A. SHUAIBU, Aliyu USMAN, Evaluation of Nano-Hydroxyapatite/Nano-Kaolin Composite Additives on the Physical Properties of Hot Mix Asphalt Binder , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Samuel O. OLADIPUPO, Dominic S. NYITAMEN, Lanre S. MOJEREOLA, Design, Simulation and Fabrication of a Slot Loaded 2.45 GHz Microstrip Patch Antenna for ISM Band Wireless Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN, BAT-Optimized PID and ANFIS Torque-Based MPPT for a 0.5 MW PMSG-Based Wind Energy Conversion System Under Dynamic Wind Conditions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Kingsley C. IGWE, Abubakar T. MUHAMMAD, Obiseye OBIYEMI, Abiodun S. MOSES, Aku G. IBRAHIM, Joel A. EZENWORA, Julia O. EICHIE, Real-Time Evaluation of Rain-Induced Signal Degradation on Digital Satellite Television Links in Minna, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Usman GARBA, Abdullahi ADAMU, Mamuda MUHAMMAD, Physicochemical Characterisation of Mineral Sands from Northwestern Nigeria for Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Luqman K. SALATI, Sani D. MUHAMMAD, Jacob T. ADEYEMO, Simulation of Trucks Haulage Operation at Ashaka Cement Company in Gombe State, North-Eastern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Nsikan L. AKPAN, Akaniyene OBOT, Olusegun A. AFOLABI, Improvement of Power Efficiency of Sensor Network Using Ant Colony Optimization and K-Means Clustering Technique , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Ayobami O. IDOWU, Integration of Green Technologies for Sustainable Facility Management of Public Buildings in Edo State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Iliya D. IBRAHIM, Suleiman A. BABALE, Sani H. LAWAN, Auwal A. ABUBAKAR, Design of a Modified Wideband Microstrip Patch Antenna for WLAN/WiMAX Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
