Model Selection for Path Loss Prediction of Ultra High Frequency Terrestrial Television
- Authors
-
-
Ayodele S. OLUWOLE
Author
-
Olumayowa A. OJO
Author
-
Olaitan AKINSANMI
Author
-
- Keywords:
- Model selection, path loss prediction, supervised machine learning, Random-forest, performance metrics.
- Abstract
-
Precise prediction of path loss is crucial for the reliable operation and optimal coverage of terrestrial Ultra High Frequency (UHF) television networks. Traditional models tend to have limited accuracy in complex propagation environments due to the fixed parameter assumptions and the lack of consideration of the nonlinear interactions among terrain, vegetation and antenna characteristics. This paper investigates the applicability of different machine learning models for the prediction of path loss in terrestrial UHF television networks. Received signal strength was first measured in the field at selected locations along five different routes in Ekiti State, Nigeria. The measured dataset was subsequently preprocessed and prepared for machine learning analysis. Five supervised machine learning algorithms were implemented and trained on the dataset, such as Linear Regression, K-Nearest Neighbors Regression, Random Forest Regression, Decision Tree Regression and Extra Tree Regression. Lastly, , the performance of the models was assessed using root mean square error (RMSE), mean absolute error (MAE), and coefficient of determination (R2). The results showed that KNN Regression had the lowest MAE (1.721), MSE (4.667) and RMSE (2.160) with an accuracy of 94.80%. Random Forest Regression was next with a slightly higher MAE (1.733), MSE (6.775) and RMSE (2.603), but scored the highest accuracy (94.89%) as a balanced and reliable performance overall. The results validate random forest as optimal and reliable path loss prediction model in UHF terrestrial broadcast networks. Carefully selection of machine learning models helps achieve precise estimation of path loss.
- References
- Downloads
- Published
- 21-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Ayodele S. OLUWOLE, Olumayowa A. OJO, Olaitan AKINSANMI (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Ibrahim M. GANA, Abdullahi YUSUF, Agidi GBABO, Micheal EPHRAIM, Abubakar M. HASSAN, Development and Testing of an Automated Solar-Powered Nutrient Film Technique (NFT) Hydroponic Planting System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abdulrahman S. USMAN, Folorunsho ABERUAGBA, Moses A. OLUTOYE, Umar MUSA, Mohammed ALHASSAN, Calcium Oxide Derived from Okpella Limestone as a Heterogeneous Catalyst for Biodiesel Production: Synthesis, Characterisation and Stability Assessment , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ephraim G. KEFAS, Abdulfatai JIMOH, Mohammed A. EVUTI, Abubakar A. IBRAHIM, Abdulwahab GIWA, Adeola G. OLUGBENGA, Luffa Sponge, Banana Stem and Delonix regia Seed Characterization as Potential Biosorbents for Industrial Wastewater Remediation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Vincent B. ONIGBARA, Sunday I. AGU, Muftau A. GBENLE, Metal-Based Biomaterials for Clinical Implant Applications: Materials and Performance – A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Osemwegie IKPONMWOSA-EWEKA, Alexander I. IDEMUDIA, Predicting Convective Heat Transfer Coefficient in TIG Welding via Adaptive Neuro-Fuzzy Inference System (ANFIS) , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abdulkareem BELLO, Saleh S. LUKMAN, Tasie M. CHIZE, Yusuf O. ADEIZA, Chibuzor A. OKAFOR, Abdullahi O. YAKUBU, Design, Simulation, and 3D Printing of a Lightweight Drone Frame for Farm Monitoring , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Ojochide P. DAMIAN, Fadimatu N. DABAI, Abdulwasiu ABDURRAHMAN, Kamiludeen OLANREWAJU, Bilyamin ABDULMUMIN, Grace A. OLUGBENGA, A Simulation-Driven Strategy for Improved Expandable Polystyrene Synthesis via Multi-Stage Initiator Dosing , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Umar A. ADAMU, Ya’u S. HARUNA, Ganiyu A. BAKARE, Buhari H. MAMMAN, Kunduli MUSTAPHA, Hadi M. ADAMU, Ismaila MAHMUD, Design and Simulation of a 200 MWp Floating Solar PV Plant Integrated with the Kainji Hydropower Plant, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Nnamdi S. OKOMBA, Adedayo A. SOBOWALE, Adebimpe O. ESAN, Bolaji A. OMODUNBI, Taiwo A. AWOYEMI, Development of an Intelligent-Based Elevator System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sunday IWERIOLOR, Ngozi G. EMORDI, Festus O. ISAAC, Linus CHUKWUKA, Onyekachukwu N. AKPENYI-ABOH, Liberty ANWULE, Experimental and Finite Element Investigation of Thermal Distribution and Heat Flux in an Internal Combustion Engine Cylinder , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
