Development of Enhanced Coal Briquettes for Domestic Cooking Applications in Nigeria
- Authors
-
-
Abubakar D. ADO
Author
-
Aminu D. MAHMUD
Author
-
Jamilu HARUNA
Author
-
Sadiq S. DODO
Author
-
Abdullahi YAHAYA
Author
-
- Keywords:
- Coal briquettes, calcium hydroxide, domestic cooking, combustion performance, Nigeria.
- Abstract
-
This study investigates the development of enhanced coal briquettes for domestic cooking applications in Nigeria, targeting a cleaner and affordable alternative to firewood and charcoal. Coal fines were briquetted with starch as a binder and calcium hydroxide [Ca(OH)₂] as an additive in graded proportions, yielding five formulations (F1–F5) with Ca(OH)₂ content varying from 5% to 25% at a constant 5 g of starch. The formulations were evaluated for ignition time, burning duration, ash content, and calorific value using standard laboratory procedures. A techno-economic assessment was conducted to benchmark production costs against prevalent household fuels. Results indicate that increasing Ca(OH)₂ content progressively delayed ignition (10–32 s), extended burning duration (19–45 min), and raised ash content (10–22%). Formulation F4 (20% Ca(OH)₂) provided the most balanced performance: acceptable ignition time (~25 s), extended burning duration (~38 min), moderate ash content (~13%), and calorific value of 28 MJ/kg. Estimated raw-material costs (~₦325/kg) are competitive with charcoal and kerosene. These findings indicate that enhanced coal briquettes can serve as a pragmatic transition fuel for low-income and rural Nigerian households where access to LPG is limited.
- References
- Downloads
- Published
- 17-08-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Abubakar D. ADO, Aminu D. MAHMUD, Jamilu HARUNA, Sadiq S. DODO, Abdullahi YAHAYA (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Abdulrasheed MUSTAPHA, Kolawole O. MORAKINYO, Seyi O. FARODOYE, Rilwan B. HABEEB, Oluwatimilehin I. ADEBAMBO, Sunday F. OLAWALE, Evaluation of Green Architectural Strategies for Thermal Comfort in Four-Star Hotels in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Habib I. ABDULAZEEZ, Bala ABDULLAHI, Abdullahi AHMED, Ibrahim A. TUKUR, Experimental Investigation of Solar Photovoltaic Tilt Angles for Maximum Energy Harvest in Kogi State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Anthony U. AINETOR, Martins ILEVBARE, Awareness of the Availability and Use of Domestic Control Systems and Automation among the University of Benin Resident Staff , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mutiat S. YISA, Cross-Regional Energy Strategies: Evaluating Japan’s Power Blueprint for Nigeria’s Needs , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Yahaya U. JAURO, Danladi D. USMAN, Lawan G. ABUBAKAR, Yusuf G. SHIMBURA, Aminu MOHAMMED, Design and Fabrication of Tapered Screw Briquetting Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Umar A. ADAMU, Ya’u S. HARUNA, Ganiyu A. BAKARE, Buhari H. MAMMAN, Kunduli MUSTAPHA, Hadi M. ADAMU, Ismaila MAHMUD, Design and Simulation of a 200 MWp Floating Solar PV Plant Integrated with the Kainji Hydropower Plant, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Muhammad M. HAMIDU, Development of MATLAB-Based Model for Solar Radiation Prediction and Photovoltaic Panel Tilt Optimization Angle for Maiduguri Region, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad B. MUHAMMAD, Muhammad Y. ABDULLAHI, Aminu BALA, Optimal Reduction of Technical Power Losses in Radial Distribution Networks Using Differential Evolution for Distributed Generation: A Case Study of the Azare Substation in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Kayode A. IDOWU, Victory N. JESSEY, Emmanuel B. SAMANI, The Role of Aesthetic Properties of Granitic Dimension Stones on Marketability: A Case Study of CIBI Nigeria Limited, Kaduna State , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ayodele S. OLUWOLE, Olumayowa A. OJO, Olaitan AKINSANMI, Model Selection for Path Loss Prediction of Ultra High Frequency Terrestrial Television , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Abdullahi YAHAYA, Ahmad ADO, Jaju A. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF, Kinetic Modelling of Sonocatalytic Phenol Degradation over Alumina-Supported Copper Oxide Catalyst , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
