Awareness of the Availability and Use of Domestic Control Systems and Automation among the University of Benin Resident Staff
- Authors
-
-
Anthony U. AINETOR
Author
-
Martins ILEVBARE
Author
-
- Keywords:
- Awareness, Availability, Challenges, Domestic control systems, Automation.
- Abstract
-
This research focuses on the awareness, availability, and use of domestic control systems among University of Benin resident staff. It emphasized on the importance of domestic control and automation system in places of residence together with the essence of awareness regarding its use. Survey method was the research design used. A total of 30 resident staffs from University of Benin was used as the population. Four research questions were used for this research. A reliability of 0.82 by test-retest method was obtained from a thirteen-item questionnaire used to gather data. Data were analyzed using the mean. Findings revealed high awareness of smart security systems, lighting, and home assistants, but lower awareness of less common technologies like smart thermostats. Availability and use of smart home devices were moderate, with cost, unstable electricity, and cyber security concerns identified as major barriers. Despite these challenges, respondents had a positive perception of home automation and expressed willingness to adopt it if costs were reduced and infrastructure improved. The study recommends government support, awareness campaigns, affordability measures, and enhanced cyber security to boost adoption of smart home technologies in Nigeria.
- References
- Downloads
- Published
- 30-06-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Anthony U. AINETOR, Martins ILEVBARE (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Sulaiman Y. ADAMU, Fadimatu N. DABAI, Abdulazeez Y. ATTA, Baba Y. JIBRIL, Preparation and Characterization of Enhanced Hierarchical Zn-Ni/HZSM-5 Catalysts for Potential use in Catalytic reactions to Upgrade Bio-Oil and Hydrogen from Biomass Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Dandison M. WALI, Beabu B. DUMKHANA, Raymond A. EKEMUBE, Silas O. NKAKINI, Smart Assessment of Tractor Noise Levels During Tillage Operation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Titilope A. BANJOKO, Bilkisu L. MUHAMMAD-BELLO, Predicting Requirement Change Using Bayesian Networks on Historical Traceability Data , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mukhtar N. YAHYA, Sohaib ALHAJHUSSEIN, Wastewater Analysis Using Kubota Membrane Bioreactor System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Hyelni G. MSHELIA, Abdulfatai JIMOH, Mohammed A. EVUTI, Abubakar A. IBRAHIM, Abdulwahab GIWA, Adeola G. OLUGBENGA, Potential of Onion Skin, Luffa cylindrica, and Corn Cob as Cellulose Sources: A Study of Their Proximate, Ultimate, and Morphological Properties , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Adefemi O. ADEODU, Banjo C. ADEDOKUN, Amos A. ADEGBITE, Development and Performance Evaluation of an Injection Moulding Machine for Recycled Polymer Composite Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Osagie I. IHENYEN, Raymond A. EKEMUBE, Development of an Agro-Waste Diesel Engine Powered Shredding Machine , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Hafsah A. ABDULRAHMAN, Muhammad M. HAMIDU, Techno-Economic Optimization of a Hybrid PV-Wind-Waste-to Energy System for the University of Maiduguri , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mathew O. ADEOTI, Victor N. HARUNA, Omolayo M. IKUMAPAYI, Timothy A. ADEKANYE, Development and Characterization of Epoxy-Based Asbestos-Free Brake Pad Composites Reinforced with Cow Hoof Particulates , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Umar A. ADAMU, Ya’u S. HARUNA, Ganiyu A. BAKARE, Buhari H. MAMMAN, Kunduli MUSTAPHA, Hadi M. ADAMU, Ismaila MAHMUD, Design and Simulation of a 200 MWp Floating Solar PV Plant Integrated with the Kainji Hydropower Plant, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Anthony U. AINETOR, Martins ILEVBARE, Machine Fabrication Student’s Self-Esteem and Interest in Career Choice as Correlates of their Entrepreneurial Intention in Nigerian Universities , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
