Evaluation of Green Architectural Strategies for Thermal Comfort in Four-Star Hotels in Nigeria
- Authors
-
-
Abdulrasheed MUSTAPHA
Author
-
Kolawole O. MORAKINYO
Author
-
Seyi O. FARODOYE
Author
-
Rilwan B. HABEEB
Author
-
Oluwatimilehin I. ADEBAMBO
Author
-
Sunday F. OLAWALE
Author
-
- Keywords:
- Thermal comfort, green architecture, passive design, hotels, Nigeria, RII, regression.
- Abstract
-
Thermal comfort is a critical component of indoor environmental quality in hot–humid climates, where building performance is strongly influenced by passive design strategies. This study evaluates the effectiveness of green architectural strategies in enhancing thermal comfort in four-star hotels in Nigeria. A qualitative descriptive approach supported by field measurements and structured observational analysis was adopted. Twenty (20) purposively selected hotels in Lagos, Abuja, Kano, and Kaduna were assessed using an observation checklist focusing on building orientation, shading devices, natural and cross ventilation, landscape integration, and green roof systems. Data were analyzed using descriptive statistics, Relative Importance Index (RII), and regression analysis. Findings show that building orientation and shading devices recorded the highest adoption (75%; RII = 0.75), followed by natural ventilation and landscape integration (70%; RII = 0.70), while green roofs were minimally adopted (20%; RII = 0.20). The overall adoption level was moderate, indicating partial integration of passive strategies. Regression results revealed a strong positive relationship between green architectural strategies and thermal comfort (R = 0.91; R² = 0.83), with the model statistically significant (F = 48.80, p = 0.002), confirming that 83% of thermal comfort variation is explained by strategy adoption. The study concludes that while passive design strategies enhance thermal comfort, their fragmented implementation limits performance. Integrated application is required to improve indoor comfort and reduce reliance on mechanical cooling in Nigerian hotels.
- References
- Downloads
- Published
- 01-07-2026
- Section
- Articles
- License
-
Copyright (c) 2026 Abdulrasheed MUSTAPHA, Kolawole O. MORAKINYO, Seyi O. FARODOYE, Rilwan B. HABEEB, Oluwatimilehin I. ADEBAMBO, Sunday F. OLAWALE (Author)

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Fadimatu N. DABAI, Abdulkadir M. SANI, Abdulwasiu ABDURRAHMAN, Comparative Study of Thermal, Catalyst-Mediated, Biomass-Assisted, and Combined Upgrading Routes for Nigerian Bitumen over a Hierarchical CoMo/ZSM-5 Zeolite Catalyst , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Zachariah S. PYENDANG, Felix ACHEMA, Isheni YAKUBU, Solomon E. APEH, Microstructural Characterization of Fibre Reinforced Polymer (FRP) Composite (Kenaf Fibre and Polyester Resin) for Structural Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Iliya D. IBRAHIM, Suleiman A. BABALE, Sani H. LAWAN, Auwal A. ABUBAKAR, Design of a Modified Wideband Microstrip Patch Antenna for WLAN/WiMAX Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Chukwuemeka S. IBEH, Abubakre O. KAMARDEEN, Saka A. ABDULKAREEM, Aliyu A. ABDULLAHI, Experimental Study on the Characterisation and Thermo-Physical Properties of Graphene-Agro Based Hybrid Nanofluids , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Chioma I. MADUEKE, Audu YEMI, Joseph M. ABIDEMI, Eberechukwu C. DIM, Plastic Waste Challenges in Nigeria: A Review on Pollution, Sorting, and Recycling Approaches , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Benjamin T. ABUR, Abubakar A. WARA, David ISAH, Mary D. IGBUR, Catherine N. KWAGHMANDE, Co-Gasification of Sugarcane Bagasse and Coal: A Study on Thermal Characteristics and Efficiency , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sarafa ISHOLA, Olusegun S. OLAOYE, Adeyinka A. ADEGBOLA, Isaac A. OLUREMI, Oluseye O. AGBEDE, Drying Kinetics and Combustion Characteristics of Carbonized Cashew Nut Shell Briquettes Under Open Sun, Passive and Active Solar Drying , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, Francis O. BOROKINNI, Friday ONUH, Tunde O. OGUNDANA, Adebayo I. OLUMOROTI, Developments and Applications of Additive Manufacturing in the Automotive Industry , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Sunday IWERIOLOR, Ngozi G. EMORDI, Festus O. ISAAC, Linus CHUKWUKA, Onyekachukwu N. AKPENYI-ABOH, Liberty ANWULE, Experimental and Finite Element Investigation of Thermal Distribution and Heat Flux in an Internal Combustion Engine Cylinder , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Abubakar M. ALI, Haruna IBRAHIM, Ephraim G. KEFAS, Thermal Plasma Gasification of Municipal Solid Waste: Principles, Technological Advances, Challenges, and Future Prospects , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
